[email protected]

Thanks JorgeB.

Hello All, Can someone take a look at my logs I've attached. I'm getting an error in 'Fix common problems" and it is advising me to do this. I'm suspecting my parity drive is failing. I just saw an "smart error" on it. Let me know. Thanks, ce tower-diagnostics-20240206-1306.zip

Hello All, I'm stuck with the binhex-delugevpn docker. Somehow I changed the password to the webgui and I cannot login. I've tried: -stopping the docker -removing the docker -running app data cleanup (and removing the container) And then re-installing. Same issue. I'm unsure where the password is kept and exactly how to re-install and reset the webui password. Also tried removing the line in ~/.config/deluge/web.conf starting with the "pwd_sha1". I did find a python script that is supposed to allow changing the password but don't quite know how to run it. (can't find python or python3) Any help would be appreciated. Thanks, Clayton

Hello All, I'm stuck with the binhex-delugevpn docker. Somehow I changed the password to the webgui and I cannot login. I've tried: -stopping the docker -removing the docker -running app data cleanup (and removing the container) And then re-installing. Same issue. I'm unsure where the password is kept and exactly how to re-install and reset the webui password. Also tried removing the line in ~/.config/deluge/web.conf starting with the "pwd_sha1". I did find a python script that is supposed to allow changing the password but don't quite know how to run it. (can't find python or python3) Any help would be appreciated. Thanks, Clayton

I did finally get this working. My main problem was that I had configured the cards to work first with a VM. This meant I had to undo the PCIe ACS override: that I had configured. Then when I installed the DVB drivers, my cards were recognized. I then added the following to the 'extra parameters' in my docker: --device=/dev/dvb/. Much easier that I thought it would be.

How did you get the HVR-2255's working? I have 2 of these that I want to get working in a SageTV Docker. Also, how did you get the drivers installed? (on Unraid or the Docker?) I have them working a Windows 10 VM (I did the ACS Override that Space Invader showed on a Youtube video). I then installed the 2255 Windows drivers on the VM. Thanks, Clayton

Hello all, I have 2 Hauppage 2255 Capture cards installed in my UNRAID server that I would like to get running in a docker. I've gotten them to work inside a VM but would like to take it one step further and get them working in side a Docker. I'm thinking of using them with one of the SageTV dockers. I've done the ACS override to get them isolated in there own IOMMU group but not sure what to do for the Docker side. This is from my VM where it is working... Thanks -Clayton

I'm having the same issue. My mouse turns into a dot (like a period) and I cannot click on anything. Only solution is to restart the VM.

Thanks JorgeB, That helped me to resolve it. I had read about the C-States being an issue but I could not find that in the bios. I upgraded the bios to the latest ( I was 2 vesions behind). After the update, I was able to find and disable C-States. Its been running for a few hours now without issue. I appreciate your help. -ce

Hello All, I've replaced my older Xeon with a AMD 4700G server. Since then (about 2 weeks) I've had a few lockups... Can someone take a look at my logs and let me know what they think. A few clues that may help: 1. Parity had just finished (or should have around when the latest crash) 2. The UI show's a failed drive and none seem to be bad. Perhaps its the parity drive (I don't know... It's brand new) 3. The latest crash was also doing an appdata backup at the time. 4. Each time it crashes it will not restart until I move the boot thumb device to a different port. It won't be found otherwise. Tbanks -ce tower-diagnostics-20230930-1913.zip

I'm having the issue mentioned above. In the forums I was reading what others have done. They mention running dosfsck to repair the boot disk but that seems to assume I have a linux desktop. I do not. How can I get this resolved? My unraid system will not boot because of this issue. Can someone help me here? Thanks -ce UPDATE: I tried running a chkdsk /f in windows but it thinks everything is fine with the disk....

And here are my logs. tower-diagnostics-20230925-1725.zip

Hello All, I'm having a problem on some new hardware that I've gone to (AMD Ryzen 5 5600G with Radeon Graphics @ 3900 MHz).... It's been working fine for a few over a week but now I'm having the console lock up on me. Unraid seems like its still up and running. But my console is locked with this: Anybody have any thoughts? Thanks

Is there an easy way to repair a corrupted SQLlite database? I've read many of the posts and they are too complicated for me. Thanks

Hello All, I had a disk drive fail in my array. The drive failure was showing xfs errors in the logs. I replaced the drive and UNRAID rebuilt/recovered the data to the drive and the did a parity update. The replacement drive then was having problems showing xfs errors (it was not new). I reformatted the drive and its now empty. Have I hosed all the data on that disk? Is there a way to start a rebuild on that disk again since my parity was up to date. Thanks, Clayton

II have had this problem 4 times in the past year. Very painful and difficult to solve. Yesterday I copied back the backup SQLlite DB's following the support website and it seemed to help. Now I get SQLlite errors when I re-add my movies into the database. My appdata is cache only. What am I missing? Why does this keep happening. I'm ready to just go back to Kodi. Thanks, ce

Hi Scott, quick question for you... When is this parity calculation done. I thought it was always a post process job that was scheduled but now I'm seeing conflicting notes. It seems that it is now done in realtime. Can you clarify for me? If its now done in real time, when did this change happen (or am I completely mistaken about this being a post process). Thanks -Clayton

Ok. I think you have convinced me. Has unraid always done realtime raid protection I thought it was always a post process. If no, when did it change? There has to be some sort of announcement to this effect. Thanks

In my ui, it says the parity check runs at 2:00 am and mover runs at 10 pm. Can you show me some where it says that it's realtime?

I disagree.

Maybe there is something new in Unraid I'm not aware of. I know you can have redundant cache drives. Let me know if I'm not up to speed on it.

My 'parity' process runs at 2:00AM. New files that have been written are unprotected until that time. See below. The orange icon indicates that new files have been added but are unprotected until the parity process completes.

Because I don't have a redundant cache pool, my configuration is not 100% protected until the parity is calculated (which I run late at night). Systems like ZFS (and other RAIDS) calculate and write the parity as the data is entering the RAID system so are technically protected once that transaction is accepted.

What makes it different that so many others is the way it does RAID. Real time raid systems are overly complicated (especially to change a failed disk) and often have a steep performance penalty or hardware requirement. For what I do, (movies, TV shows, backups) I just don't need instant RAID protection. I can way until overnight for my raid parity protection to be generated. I'm not a bank or a hospital!

Can someone help me with how to change my admin user and password? I've had my docker running fine for a few months but now I cannot login as an administrator. I've looked at the /etc/motioneye but am not seeing a user/password in any of the files in that directory. Thanks