NY152

Hello, I'm trying to use Kerberos.io but nothing seems to work. Whether in HOST, BRIDGE or other mode, the web interface is inaccessible. Here is the log, nothing tells me about a possible problem: 2018-06-20 21:00:10,013 CRIT Set uid to user 0 2018-06-20 21:00:10,034 INFO RPC interface 'supervisor' initialized 2018-06-20 21:00:10,034 CRIT Server 'unix_http_server' running without any HTTP authentication checking 2018-06-20 21:00:10,034 INFO supervisord started with pid 8 2018-06-20 21:00:11,036 INFO spawned: 'machinery' with pid 12 2018-06-20 21:00:12,038 INFO success: machinery entered RUNNING state, process has stayed up for > than 1 seconds (startsecs) Thank you for helping me

Before doing such extreme stuff, I tried the TCPOptimizer program. The VM does not seem to be disconnected ... For the moment ... I would come back and say if that was enough to fix the problem.

Hello, Since I updated to 6.5.3, my VMs lose their connections systematically after a certain time. I checked all my configuration but nothing abnormal and if I try to repair the connection from the VM is a systematic blue screen! I have the virtIO drivers up to date and I do not know what to do. I'm wasting a lot of time and my VMs do not work anymore because of that! Thanks for giving me some leads

so many views and nobody?

I use my unRAID server for gaming. Win10 on VM with Steam and the Steam library share it in unRAID. Until version 6.5.1, my performance was excellent and the loadings very fast. But since the update 6.5.2 (and without any change in my shares, hard disk or others), a load that took (approximately) one minute, the same load takes almost seven times longer. I tried to limit the use of the same disk by moving the Steam library on disks not used by the VM but nothing works. How to restore the same sharing speed performance? Thanks in advance

I have this icon

For me, this plugin does not work anymore from unRAID 6.5.0. It no longer appears in the VMs page

Hello, I have a error when i try to access to webgui : ERR_CONNECTION_REFUSED

Tank you

My VPN is not listed (ExpressVPN) in transmission_VPN, how can I use it ? Thank you in advance

when i check a update, nothing ... i shearch egain

Hello, Since this morning, all my dockers no longer work (even those that seem to be launched at startup), the others are not startable. All have a "not availlable" version Anyone know how to make my dockers refit without loss of data? Thanks in advance

Certainly but just for a concern of VM (that I have settled), I do not want to provide all the data generated by my server (anonymous or not) And I'm surely not the only one in this case. That this data is useful is one thing but in this case, tell me where to look so that I give only the necessary.

It was not a freeze of the VM but a concern of QEMU that has a problem. It is QEMU that freeze before starting, not the VM, which once launched, runs at full speed. By not wanting to help because we do not give diagnostic files (I think some people do not want to give them in full, it can be understood), it has an advantage, we find ourselves alone without owing anything to anyone ^^

I will try to be clearer. When I start my VMs, this one, although indicated as started, nothing happens for 1, 2 or even 3 minutes and then runs in a normal way. I read somewhere that a bug could be the cause of this bug (bug between the kernel and the bios file if I understood correctly) I would have liked to have confirmation of this and if it is a bug, how to avoid it! I did not find anything in the diagnostics files on this freeze

When I try to assign any device by Libvirt Hotplug USB, I have this error: error: Failed to attach device from /tmp/libvirthotplugusb.xml error: internal error: No free USB ports I have to shut down my VM, assign the device (and re-modify my XML for video firmware for my passthrough by doing that), and there I have my functional device. An idea to correct that?

In 6.4.0, boot is very very slow. After boot, my VM is very fast. I don't understand

I have the same problem when I have no USB key or external hard drive plugged into the VM. I have to restart my VM to select my USB drive (and remake the rom of my GPU in XML) If anyone has a solution, please share it.

I would like to create a VM with the distribution Batocera.Linux but I do not know what can be problematic. I have made several attempts based on the Linux template but the boot does not exceed the logo Batocera.Linux If someone has successfully installed with this Linux distribution, I am a taker thank you in advance

To use the integrated GPU in passthrough, it is imperative that unRAID starts on another GPU in PCI-e then, it is mandatory. What I indicated allows to boot on a mono-GPU machine (and this method works with some motherboard with built-in GPU).

with one PCI-e, it is more complicated but it is possible if you use the <rom ..../> directive in VM XML with the GPU firmware You have to activate VT-x and vT-d in the bios of course

Hello, I'm trying to install OpenElec correctly but I'm in trouble. I do not have sound (well, but something very expensive and innodible) With lspci, I have this for my graphics card: 03:00.0 VGA compatible controller: NVIDIA Corporation GM107 [GeForce GTX 750 Ti] (rev a2) (prog-if 00 [VGA controller]) Subsystem: Gigabyte Technology Co., Ltd GM107 [GeForce GTX 750 Ti] Flags: bus master, fast devsel, latency 0, IRQ 39, NUMA node 0 Memory at fa000000 (32-bit, non-prefetchable) [size=16M] Memory at e0000000 (64-bit, prefetchable) [size=256M] Memory at f0000000 (64-bit, prefetchable) [size=32M] I/O ports at e000 [size=128] Expansion ROM at fb000000 [disabled] [size=512K] Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Legacy Endpoint, MSI 00 Capabilities: [100] Virtual Channel Capabilities: [250] Latency Tolerance Reporting Capabilities: [258] L1 PM Substates Capabilities: [128] Power Budgeting <?> Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?> Capabilities: [900] #19 Kernel driver in use: vfio-pci 03:00.1 Audio device: NVIDIA Corporation Device 0fbc (rev a1) Subsystem: Gigabyte Technology Co., Ltd Device 3681 Flags: bus master, fast devsel, latency 0, IRQ 37, NUMA node 0 Memory at fb080000 (32-bit, non-prefetchable) [size=16K] Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Endpoint, MSI 00 Kernel driver in use: vfio-pci MSI mode is on the video part (MSI: Enable +) but not on the audio part (MSI: Enable-) In the .config / modprobe.d / sound.conf file I already have: options snd-hda-intel enable_msi=1 Strange in my opinion because for my video card we should speak of nvidia not intel no? If anyone can help me, it would be nice

already tried ... Black screen

Hello, I start by detailing my configuration: unRAID 6.3.5 Pro with : MB : ASRock X99M Extreme4 CPU : i7-5820K CPU @ 3.30GHz (6 cores / 12Threads) RAM : 64 GB DDR4 GPUs : 1 x NVidia GTX 970 & 1 x ATI Radeon RX 480 I wish I could use the 2 video cards in my VMs simultaneously. I tried several tutorials dedicated to that but if one works normally (normal is the second card), the primary display goes black and nothing happens. I tried the card Radeon RX 480 in primary then the GTX 970 (and even a 750 Ti), nothing to do. Is it possible to boot aRAID without any video output so that it does not interfere in the primary display? My motherboard has 3 PCI-E ports but the last one is used by an 8 ports SATAIII controller so I can not release it. Is it my graphics cards that are not fully compatible? If not, what are the most appropriate graphics cards? (GeForce of preference) Thanks in advance