NY152

Members
  • Posts

    123
  • Joined

  • Last visited

Everything posted by NY152

  1. So it works ... Almost! When I want to connect to it, I come back to the login page without error message (no bad login or other) Strange ...
  2. I found the problem, ngnix does not launch, it returns this error: nginx: [emerg] cannot load certificate "/etc/ssl/certs/unraid_bundle.pem": BIO_new_file() failed (SSL: error:02001002:system library:fopen:No such file or directory:fopen('/etc/ssl/certs/unraid_bundle.pem','r') error:2006D080:BIO routines:BIO_new_file:no such file) However, I have a certificate on the USB key. I am looking for ways to correct this error.
  3. Hello, After a long period of trouble, I reached my server and turned it back on a little later. Since then, everything seems to be working except the webgui. Even when starting on the webgui instead of the console, localhost does not work. Internet works, I type my message from the webgui ... Please help me correct this error.
  4. Hello, I hope I have posted the message in the correct category. I look for a box with at least 12 3.5' HDD bays for a new unRAID server. All the references that I find are no longer available or not deliverable in France. Anyone have a recent reference to advise me? Thank you in advance
  5. The fan works however ... I even have several fans and several sensors. The CPU does not exceed 40 ° C, same for my GPUs (the description of the config is in signature) I just restarted it and the server has been running normally for 15 minutes (a parity check has started, let's hope nothing untoward happens during this procedure, with 7 4 TB hard disks (including 2 for parity), it will not take 5 minutes! For the moment, the server is running but I leave the subject open because the situation is still strange and even if the situation seems resolved, it may not be the case. EDIT : The server is still running smoothly ...
  6. The BIOS beep is racing and I have this: general protection fault fffc [# 1] SMP PTI general protection fault: 0000 [# 2] SMP PTI general protection fault: 0000 [# 3] SMP PTI general protection fault: 0000 [# 4] SMP PTI general protection fault: 0000 [# 5] SMP PTI general protection fault: 0000 [# 6] SMP PTI general protection fault: 0000 [# 7] SMP PTI general protection fault: 0000 [# 8] SMP PTI general protection fault: 0000 [# 9] SMP PTI general protection fault: 0000 [# 10] SMP PTI general protection fault: 0000 [# 11] SMP PTI general protection fault: 0000 [# 12] SMP PTI general protection fault: 0000 [# 13] SMP PTI general protection fault: 0000 [# 14] SMP PTI general protection fault: 0000 [# 15] SMP PTI general protection fault: 0000 [# 16] SMP PTI general protection fault: 0000 [# 17] SMP PTI general protection fault: 0000 [# 18] SMP PTI general protection fault: 0000 [# 19] SMP PTI general protection fault: 0000 [# 20] SMP PTI general protection fault: 0000 [# 21] SMP PTI No kernel panic this time ...
  7. How to do this without losing the server configuration?
  8. Hello, I just installed the latest update and on reboot, I have this on the screen: Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: vsnprintf+0x4e0/0x4ef Kernel Offset: disabled ---[ end Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in vsnprintf+0x4e0/0x4ef ]--- So I no longer have access to my server: / I need your help, thanks
  9. I am looking to secure an unraid server with a VPN. What I mainly want is for internet traffic to be cut if the VPN is disconnected (or before it connects) Is it possible ? My VPN is NordVPN Thank you for your help
  10. These are opvn profiles so I do not see what would be wrong configured (especially if only the update of dockers is impacted) In the debug console of my browser, I have this error: POST http://192.168.0.5:8000/plugins/dynamix.docker.manager/include/DockerUpdate.php 504 (Gateway Time-out)
  11. I have access from a Win10 in VM and from ArchLinux in VM too. If I go so far as to say that only Docker Hub is impacted it is because I have no other network-level problem on this server. It's the only worry, really.
  12. And only Docker Hub would be impacted? I doubt. As said above, even my VMs are powered with this VPN connection and without any worries.
  13. I just found the cause ... It comes from my VPN. All this is very counterproductive, if to update the dockers, we must not have a VPN, all this seems to me not very "clean"!
  14. I have no dockers made by me. And if Docker Hub is inaccessible, what do I do? 3 weeks that I have this.
  15. There is little chance that it is the DNS, I tested a good ten (Google, OpenDNS, my ISP ...) My internet connection works fine everywhere in unRAID (updates, VMs, plugins updates, LAN etc), there is only one problem with Docker.
  16. Hello, I am in version 6.8.0 and I still have this bug ...
  17. I just decompressed 1TB of data and converted some of it. All this via SMB. I do not have access to my server for the moment so for the dianostic data, it will be complicated. -I will do a volume check first.
  18. Hello, After very large data movements on my server, the parity check returned me a lot of errors. My question is simple: Can we know what data has been impacted by these errors? Thanks in advance
  19. While waiting for an answer, I continued my tests. What I did: - Shutdown of the server and verification of the file system of the USB key. No error. - Starting the server in maintenance mode - Test all the discs. No error. I am still searching ...
  20. I have to look in which file in Diagnotics for this kind of errors?
  21. Hello, I have this error for a few days when I try to rename a folder. All my shares are read-only. What I did: I have just started a parity check, no mistakes at the moment but it is far from over (~ 5 hours). I tried to make the rights corrections with "new permission" but my all shares is unprotected and accessible to everybody, very badly that. This did not correct this error. What should I check? Thank you for your help.
  22. It is the server that can not access the Internet (unless the target is an IP, if it's a name, it does not work). And therefore, if the server does not connect properly, it's the same for any plugin, docker, or VM. In the terminal if I do: ~# ping google.fr ping: unknown host google.fr However, if I use the IP of the targeted site: ~# ping 172.217.22.131 PING 172.217.22.131 (172.217.22.131) 56(84) bytes of data. 64 bytes from 172.217.22.131: icmp_seq=1 ttl=55 time=9.69 ms 64 bytes from 172.217.22.131: icmp_seq=2 ttl=55 time=11.0 ms 64 bytes from 172.217.22.131: icmp_seq=3 ttl=55 time=9.75 ms 64 bytes from 172.217.22.131: icmp_seq=4 ttl=55 time=22.8 ms 64 bytes from 172.217.22.131: icmp_seq=5 ttl=55 time=25.8 ms ^C --- 172.217.22.131 ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 4006ms rtt min/avg/max/mdev = 9.694/15.842/25.885/7.047 ms My server is on a connection whose DNS are provided by my Internet provider by default and works very well from other machines/servers on the line. I am still searching ...
  23. For a few days, without changing settings, unraid has problems with the Internet. At first, I thought of a lack of total connection but in fact there is a present connection but it only works when we use IP, by domain names, it does not work. Someone would have a solution? Where to look? What to configure? Thanks in advance
  24. Hello, In recent weeks, I have a very troublesome problem with the network card of my VM. It does not recover the default psserelle (everything is automatic). I decided to uninstall the driver (the only thing I had not tried yet) but I end up with a driver who does not install (I tried with the latest drivers virtio) and I have a code 56 in the device manager. Surprisingly, the network card works perfectly in safe mode (with network support recess), no error in the device manager and I have internet. Once back in normal mode, it does not work and code 56 is there again. Someone would have a solution? Thank you in advance.
  25. Hello, Speaking of CD/DVD/BD player/writer, I am looking for a docker that would allow burning (with k3b or Brasero) but I found nothing going in this direction. I am looking for a Docker solution because my burner is very well detected by the Docker MakeMKV while it is so complicated to set up in a VM (the few tests that I could do freeze the VM at startup ...) and it's not even certain that engraving is possible. Thank you for your help