ssjucrono

yes, I have been using the creator tool and having the issue where it hangs on syncing files system. I found a thread on it but it wasn't helping. I will review the thread you posted trurl thank you

yes! and that's what I have tried but for some reason my server just says no bootable media. Like the flash drive didn't get made correctly with the unraid usb creator tool. I will try some different USB ports and see. Thank you!

I was trying to use a different flash drive. But for some reason none of the ones I made using the creator have been bootable not sure why. And yeah it may be the u3 as it's a SanDisk. I will try reset my bios and using the same flash drive. Can I make a flash backup now of this USB? I'm currently in safe mode with GUI Thank you all for your time

Booted into safe mode and got this on the monitor. Just started the array will see what happens next

ok I will try that. would safe mode tell me if it is a plugin issue? Or just waiting and seeing the uptime? Currently docker containers, VMs and Shares still work. It is just the webui not loading. Thank you again

raid-diagnostics-20220619-1401.zip After rebooting about week ago I can no longer reach the webui. Log is not full. I gather diagnostics again here they are. Really looking for help here. I did not make any changes that I am aware of to the system and previously it would run for 5 months without issue. Thank you for you help

after rebooting it worked for a 2 days then my docker containers stopped working. My VMs were still functioning okay. Very strange behavior. The only new plugin I installed recently is the file manager by dynamix. I just powered down the whole server to give it a rest as I was getting frustrated. If anyone has nay insight that would be greatly appreciated. Thank you

Hello, I have been troubleshooting this issue for a few weeks. Unraid webui stops working after about 3 days uptime. This started about 2 weeks ago and reboot help the issues but again after 2-3 days webui becomes unresponsive. I thought first thought that /var/logs was becoming full but the webui was unresponsive prior to the logs becoming full. I have attached a few different logs prior to reboots. Let me know how else I can gather information raid-diagnostics-20220609-0954.zip raid-diagnostics-20220530-0910.zip raid-diagnostics-20220530-0905.zip raid-diagnostics-20220613-1913.zip raid-diagnostics-20220613-1909.zip

Hello, I had a power outage on Saturday. My server is connected to a UPS. I had time to safely power it down on the UPS. Once power came back online I powered up the server. everything has been fine. I noticed I was getting machine check errors in my notifications. I checked the syslog and seems to be a few of them. but I can't make heads or tails. Can someone take a look and let me know if I should be concerned or not? Thank you again I have attached the syslog and diag raid-diagnostics-20210125-0708.zip raid-syslog-20210125-1308.zip

Hey thanks Ed! this is template is working great for me! dresden deconz just needs to fix the network connection dropout issue in their software!

Hello, I powered down my server to do maintenance, I removed two video cards and blew some compressed air to dust the fans. Powered it back on and have Machine Check Events. I briefly looked through the logs and there seem to be a lot of errors but I cannot make heads or tails. Any insight would be greatly appreciated. I have attached the diagnostic file.raid-diagnostics-20200613-1912.zip

Oh, I am using the onboard SATA Ports on the motherboard? That doesn't sound good?

Thank you @johnnie.black for your response! I ran an extended test: How do I actually get the report? I can attach it if needed Edit: Attached smart report raid-smart-20200512-1153.zip

Hello, I experienced a power outage at my home. Causing my server to hard shutdown ungracefully. I got everything turned back on and working. The Parity check completed but then I got a read error on my Parity Disk. I am looking for confirmation on how bad is this do I need to swap disks? I have attached my diag log as well as screenshots of the error. Thank you for your assistance. raid-diagnostics-20200510-1001.zip

Can you please explain more? I am trying to get this setup with nginx proxy manager and cannot figure how to pass thru the ports needed as there are multiple. thank you

yeah I am looking for a solid Video conferencing solution personal use. Anyone has any insight to get this going in docker it would be greatly appreciated.

Thank you for your reply. How would I know if it is set to RAM? would be set to /tmp?

Hello, I have received a Out of memory error on my server. I have 32GB of RAM one VM running using 4GB. Plex docker among other things. I have attached my diagnostics. any help would be greatly appreciated. Thank you raid-diagnostics-20200320-0755.zip

I really enjoy the application store docker support and easy expandability! Built in backup support to network share

ok thank you for your help!

@johnnie.black Where can I see the current or past temperatures of the CPU in unraid?

@johnnie.black Thank you I understand that. However I was more looking to see if someone could tell me if this is a false positive or not. Or more insight into what, when it happened etc. I do have adequate cooling and find it hard to believe that my CPU overheated. Also wondering if my CPU is still throttled or not and how to reverse this change. Thank you

I received a warning today that my CPU may have overheated and is throttled? Here is the message in Fix Common Problems: "Your CPU is overheating and has been throttled down (This may however be a transient occurance). You may need to clean your filters and/or increase your cooling capacity." I have copied my diagnostics which has the syslog in it I believe. Any insight into this issue would be greatly appreciated. Thank you raid-diagnostics-20190321-1121.zip

Hello Folks, This is the second time with new-ish hardware that this has happened to me. I am on unraid 6.6.6 The Unraid webgui is not loading in a browser. I tried chrome as well as edge when I connect the monitor directly to the server there is no signal, monitor stays in power saving mode. I cannot access some dockers or VMs that are on the server I cannot access plex or ubooquity both running in a docker I cannot ssh via putty to unraid I can access home assistant that is running in a docker on unraid the Shares are still visible over network I can copy data back and forth from unraid I can ping the server not sure what next steps to take. I really am trying to avoid an unclean shutdown since last time I did that I had to rebuild a disk, see previous post for more details: Thank you any advice would be appreciated

@trurl Server has been working well since I rebuilt the array. I did shutdown and add a video card. when I started the array I got a notification about hardware error: "Your server has detected hardware errors. You should install mcelog via the NerdPack plugin, post your diagnostics and ask for assistance on the unRaid forums. The output of mcelog (if installed) has been logged" I have also attached the diagnostics zip let me know if this is anything to be concerned about. Thank you raid-diagnostics-20190116-0828.zip