Hi All,
I've been trying to convert my 9211-8i from IR to IT.
I have tried in Windows but it says it cannot erase properly so i cannot flash from IR to IT.
I've tried EFI but my EVGA Z87 FTW has UEFI it won't seem to boot the shell at all, it can see the shell on the USB stick.
So i booted up Unraid and thought i would try Linux since i will be running unraid once i get this sorted.
Downloaded all the utilities from broadcom's website and put sas2flash for linux on a USB Stick.
I also get the following error when i try running it sas2flash: cannot execute binary file: Exec format error
I don't know what to do i have spent about 2 days on this already and its not that easy to firmware flash
Any suggestions ?
Can i use this in IR mode?
01:00.0 Serial Attached SCSI controller: LSI Logic / Symbios Logic SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon] (rev 03)
Subsystem: LSI Logic / Symbios Logic SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon]
Flags: bus master, fast devsel, latency 0, IRQ 16
I/O ports at e000
Memory at df6c0000 (64-bit, non-prefetchable)
Memory at df280000 (64-bit, non-prefetchable)
Expansion ROM at df200000 [disabled]
Capabilities: [50] Power Management version 3
Capabilities: [68] Express Endpoint, MSI 00
Capabilities: [d0] Vital Product Data
Capabilities: [a8] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [c0] MSI-X: Enable+ Count=15 Masked-
Capabilities: [100] Advanced Error Reporting
Capabilities: [138] Power Budgeting <?>
Capabilities: [150] Single Root I/O Virtualization (SR-IOV)
Capabilities: [190] Alternative Routing-ID Interpretation (ARI)
Kernel driver in use: mpt3sas
Kernel modules: mpt3sas