mgiggs

Hi All, The WebUI keeps reminding me of a later version being available but I cannot see anyway to update the solution, I'm assuming the docker hub needs to be updated to 2.5.x? When does this usually happen, looks like the latest version has been out about a month? Cheers Michael

Can confirm that turning off Plex does not resolve the issue. My diagnostics attached if anyone wants to look closely. unraid-diagnostics-20221109-0927.zip

I have this same issue, put lots of effort into making sure that my spinning drives are only used for backups and media/video use and my disk logs are full of "read SMART" spin ups and spin downs 15 minutes later. No other access on the drives for hours. I have just turned off Plex to test that and will report back but looking at this thread, I'm not confident it will work.

Great tool, thanks for your work on this. I'm a long time Borg user but never really liked managing it all through scripts and have tested that I can migrate my existing backups into this Vorta docker quite easily which is great! One thing I'm keen to do and looking for the author's or others guidance is getting the results into the Unraid syslog server, as having to open the interface and check the log of each profile for success or failure is not sustainable. In my existing scripts for borg, I send a mesage based on the output code to the Unraid syslog and I will explore doing that here but a proper capability within Vorta or this container would be great. I will also raise this as a feature request with Vorta. Interested in ideas though, I will try and post messages to the systlog from within the docker using the post command line but keen to hear ideas around this or if people have a better way.

Thanks Andrew, great support and thanks for your time putting this together for the community! Sent from my SM-G960F using Tapatalk

Thanks for the response, confirmed what I thought. And already had the ports mapped. Look forward to the new version as well. Thanks for your help!

Thanks for the response Andrew, that fixed it, I could not find that setting anywhere and all resources pointed to changing the system time. One more question I'm hoping you can help with. I use Splunk as a syslog server and so setup both TCP and UDP port 514 Data Inputs but it seems that these data inputs were lost so I'm guessing the inputs.conf file is not setup to be persistent. I can of course copy this folder and map it to a persistent location using Docker but I am interested in your input as to whether I have misunderstood it or if you have a better way? Cheers Michael

How do I set the timezone correctly in this docker? All references to timezone setting in regards to splunk, linux and docker do not work with this docker unfortunately so all my time stamps are incorrect.

Hi All, I'm having this issue the last few months where either 1 of my 2 Unassigned device backup drives are locking up and nothing but a dirty unmount and/or reboot will resolve. In the GUI, on the Main tab, the Unassigned Devices section just keeps loading and never finally loads, on the Dashboard it shows a single core maxed out but this is not the case in HTOP from the terminal. The drive that has locked is no longer available to view/use. In the Terminal, running HTOP and sorting by State shows a few processes in the D (Uninterruptible Sleep) state that will stay that way for days if left alone so I assume forever. These are: - /bin/df /dev/sdb1 --output=size,used,avail - hdparm -C /dev/sdb - find /mnt/disks/ST4000 -noleaf -maxdepth 4 - smartctl -x /dev/sdb This problem has occurred on both of my connected USB drives and for both I have run full Smart diagnostics and not found issues. The issue occurs every 4 to 8 days and I thought it was cause by Duplicati but I have stopped all local backups and the issue persists (previously the Duplicati Docker also locked in D state as it tried to use the drive). The only way I can resolve is manually shutting down the array and then doing a hard reset as the system will not reboot. I've searched for others having similar issues and have had no luck so anyone that can assist, I'd be very grateful for. Cheers Giggs