DoboY

I also have questions 2 and 3 .. If anyone can help.

1- Thanks for the dashboard, looks great.. 2- I am up and running but am curious about how much data the influx DB will use? How long will it keep data from telegraf and can I modify that somewhere? I installed the dockers on my caches drive and would not want it to fill up , i might need to move it to a non ssd drive in order to preserve the health of my SSD but not sure yet.

here's the last lines of tail before it crashes, any ideas? Dec 8 23:00:14 PinkyPie crond[1662]: exit status 1 from user root /usr/local/sbin/mover &> /dev/null Dec 8 23:19:34 PinkyPie kernel: Status code returned 0xc0000128 STATUS_FILE_CLOSED Dec 8 23:19:34 PinkyPie kernel: CIFS VFS: Send error in read = -9 Dec 8 23:27:12 PinkyPie kernel: Status code returned 0xc0000128 STATUS_FILE_CLOSED Dec 8 23:27:12 PinkyPie kernel: CIFS VFS: Send error in read = -9 Dec 8 23:29:53 PinkyPie kernel: BUG: unable to handle kernel paging request at ffff88807f050000 Dec 8 23:29:53 PinkyPie kernel: PGD 2401067 P4D 2401067 PUD 24efff067 PMD 24effd067 PTE 0 Dec 8 23:29:53 PinkyPie kernel: Oops: 0000 [#1] SMP NOPTI Dec 8 23:29:53 PinkyPie kernel: CPU: 0 PID: 0 Comm: swapper/0 Tainted: P O 4.19.107-Unraid #1 Dec 8 23:29:53 PinkyPie kernel: Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./F2A85XM-HD3, BIOS F3 03/12/2013 Dec 8 23:29:53 PinkyPie kernel: RIP: 0010:skb_copy_bits+0x12e/0x1f9 Dec 8 23:29:53 PinkyPie kernel: Code: 0b 00 00 00 44 89 c9 48 c1 e6 29 4c 01 e9 48 01 d6 48 89 0c 24 44 89 c1 48 c1 fe 06 48 c1 e6 0c 4c 01 de 48 01 fe 48 8b 3c 24 <f3> a4 41 ff 8a 00 09 00 00 45 01 c1 41 89 c0 48 83 c2 40 45 29 c8 Dec 8 23:29:53 PinkyPie kernel: RSP: 0018:ffff888247603858 EFLAGS: 00010282 Dec 8 23:29:53 PinkyPie kernel: RAX: 000000000000029b RBX: 00000000000005ac RCX: 0000000000000075 Dec 8 23:29:53 PinkyPie kernel: RDX: ffffea0001fc13c0 RSI: ffff88807f050000 RDI: ffff888029465336 Dec 8 23:29:53 PinkyPie kernel: RBP: 0000000000000036 R08: 000000000000029b R09: 0000000000000000 Dec 8 23:29:53 PinkyPie kernel: R10: ffffffff81e13480 R11: ffff888000000000 R12: 00000000000002d1 Dec 8 23:29:53 PinkyPie kernel: R13: ffff888029465110 R14: ffff88806a5236e8 R15: 0000000000000000 Dec 8 23:29:53 PinkyPie kernel: FS: 0000000000000000(0000) GS:ffff888247600000(0000) knlGS:0000000000000000 Dec 8 23:29:53 PinkyPie kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Dec 8 23:29:53 PinkyPie kernel: CR2: ffff88807f050000 CR3: 0000000100680000 CR4: 00000000000406f0 Dec 8 23:29:53 PinkyPie kernel: Call Trace: Dec 8 23:29:53 PinkyPie kernel: <IRQ> Dec 8 23:29:53 PinkyPie kernel: __pskb_pull_tail+0x62/0x32a Dec 8 23:29:53 PinkyPie kernel: validate_xmit_skb.isra.32+0x1f7/0x249 Dec 8 23:29:53 PinkyPie kernel: __dev_queue_xmit+0x4fb/0x632 Dec 8 23:29:53 PinkyPie kernel: ip_finish_output2+0x2c8/0x337 Dec 8 23:29:53 PinkyPie kernel: ? ipv4_confirm+0xa0/0xb7 Dec 8 23:29:53 PinkyPie kernel: ip_output+0xb8/0xd6 Dec 8 23:29:53 PinkyPie kernel: ? ip_fragment.constprop.5+0x72/0x72 Dec 8 23:29:53 PinkyPie kernel: ip_forward+0x39d/0x3cc Dec 8 23:29:53 PinkyPie kernel: ? ipv4_frags_exit_net+0x2b/0x2b Dec 8 23:29:53 PinkyPie kernel: ip_sabotage_in+0x38/0x3e Dec 8 23:29:53 PinkyPie kernel: nf_hook_slow+0x37/0x96 Dec 8 23:29:53 PinkyPie kernel: ip_rcv+0x8e/0xbe Dec 8 23:29:53 PinkyPie kernel: ? ip_rcv_finish_core.isra.0+0x2e2/0x2e2 Dec 8 23:29:53 PinkyPie kernel: __netif_receive_skb_one_core+0x4d/0x69 Dec 8 23:29:53 PinkyPie kernel: netif_receive_skb_internal+0x79/0x94 Dec 8 23:29:53 PinkyPie kernel: br_pass_frame_up+0x123/0x145 Dec 8 23:29:53 PinkyPie kernel: ? br_port_flags_change+0x29/0x29 Dec 8 23:29:53 PinkyPie kernel: br_handle_frame_finish+0x335/0x37a Dec 8 23:29:53 PinkyPie kernel: ? ipt_do_table+0x5b6/0x603 [ip_tables] Dec 8 23:29:53 PinkyPie kernel: ? br_pass_frame_up+0x145/0x145 Dec 8 23:29:53 PinkyPie kernel: br_nf_hook_thresh+0xa3/0xc3 Dec 8 23:29:53 PinkyPie kernel: ? br_pass_frame_up+0x145/0x145 Dec 8 23:29:53 PinkyPie kernel: br_nf_pre_routing_finish+0x239/0x260 Dec 8 23:29:53 PinkyPie kernel: ? br_pass_frame_up+0x145/0x145 Dec 8 23:29:53 PinkyPie kernel: ? nf_nat_ipv4_in+0x1d/0x64 [nf_nat_ipv4] Dec 8 23:29:53 PinkyPie kernel: br_nf_pre_routing+0x2fc/0x321 Dec 8 23:29:53 PinkyPie kernel: ? br_nf_forward_ip+0x352/0x352 Dec 8 23:29:53 PinkyPie kernel: nf_hook_slow+0x37/0x96 Thanks

So I opened it up and reseated the sata cables just in case and swapped out the power supply to a newer one and it seems stable for now, before that I was getting a lot of hard resets on a one of the sata drives

Has been working great for months, and now it's starting to crash randomly. I have the attached pic from the monitor that is connected to it when it crashes. Any ides? running a parity check now, hopefully it passes and does not crash again as last time it crashed during parity check .

And pre-clear passed on both drives.. no more error's in the logs, but only after they both dropped down to SATA 1.5Gbps.. So weird. swapping Power supply today and trying parity again I guess..

Ok well then I am back to having zero idea why they seem to run fine atm @ 1.5Gbps, as soon as i reboot or stop start the array i am sure they will renegotiate and get screwy on me again, i have a new power supply coming in tomorrow so I will re-wire it all and try again, if it still gives me issues will try the Marvell Sata card i have to see if it handles it better.. just seems odd is all. currently zeroing out both drives @ 130+MBps and no errors yet. So strange..

that could be my issue ( USB-SATA bridge) but I cannot find any info about the mobo and what type of SATA controller it has. it is an old motherboard (2012)

Thanks for taking the time. How does that differ from normal if i may ask? what kind of functionality would i lose during the rebuild, i restarted the pre clear and since they have both connected at 1.5Gbps they seem to be working normally, is there a way to limit the connection speed somehow(hard code)? The logs had some errors before of "limiting SATA link speed to 3.0 Gbps, then more errors then limiting SATA link speed to 1.5 Gbps.. then no more errors?.

Any ideas why the drives would stop throwing errors about 1 hour into the test? there have been 0 drive errors since about an hour in? nothing has changed on the array, load has be low and high at times and still no more errors? have not touched a thing. Apr 6 09:00:44 PinkyPie kernel: print_req_error: I/O error, dev sdh, sector 708460368 Apr 6 09:00:44 PinkyPie kernel: sd 7:0:0:0: [sdh] tag#2 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 Apr 6 09:00:44 PinkyPie kernel: sd 7:0:0:0: [sdh] tag#2 Sense Key : 0x5 [current] Apr 6 09:00:44 PinkyPie kernel: sd 7:0:0:0: [sdh] tag#2 ASC=0x21 ASCQ=0x4 Apr 6 09:00:44 PinkyPie kernel: sd 7:0:0:0: [sdh] tag#2 CDB: opcode=0x88 88 00 00 00 00 00 2a 3a 44 00 00 00 05 40 00 00 Apr 6 09:00:44 PinkyPie kernel: print_req_error: I/O error, dev sdh, sector 708461568 Apr 6 09:00:44 PinkyPie kernel: sd 7:0:0:0: [sdh] tag#3 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 Apr 6 09:00:44 PinkyPie kernel: sd 7:0:0:0: [sdh] tag#3 Sense Key : 0x5 [current] Apr 6 09:00:44 PinkyPie kernel: sd 7:0:0:0: [sdh] tag#3 ASC=0x21 ASCQ=0x4 Apr 6 09:00:44 PinkyPie kernel: sd 7:0:0:0: [sdh] tag#3 CDB: opcode=0x88 88 00 00 00 00 00 2a 3a 49 40 00 00 00 c0 00 00 Apr 6 09:00:44 PinkyPie kernel: print_req_error: I/O error, dev sdh, sector 708462912 Apr 6 09:00:44 PinkyPie kernel: ata7: EH complete Apr 6 09:00:44 PinkyPie kernel: ata7.00: exception Emask 0x10 SAct 0x1800018 SErr 0x10200 action 0xe frozen Apr 6 09:00:44 PinkyPie kernel: ata7.00: irq_stat 0x00400000, PHY RDY changed Apr 6 09:00:44 PinkyPie kernel: ata7: SError: { Persist PHYRdyChg } Apr 6 09:00:44 PinkyPie kernel: ata7.00: failed command: READ FPDMA QUEUED Apr 6 09:00:44 PinkyPie kernel: ata7.00: cmd 60/a8:18:00:ba:3a/05:00:2a:00:00/40 tag 3 ncq dma 741376 in Apr 6 09:00:44 PinkyPie kernel: ata7.00: status: { DRDY } Apr 6 09:00:44 PinkyPie kernel: ata7.00: failed command: READ FPDMA QUEUED Apr 6 09:00:44 PinkyPie kernel: ata7.00: cmd 60/58:20:a8:bf:3a/04:00:2a:00:00/40 tag 4 ncq dma 569344 in Apr 6 09:00:44 PinkyPie kernel: ata7.00: status: { DRDY } Apr 6 09:00:44 PinkyPie kernel: ata7.00: failed command: READ FPDMA QUEUED Apr 6 09:00:44 PinkyPie kernel: ata7.00: cmd 60/40:b8:00:c4:3a/05:00:2a:00:00/40 tag 23 ncq dma 688128 in Apr 6 09:00:44 PinkyPie kernel: ata7.00: status: { DRDY } Apr 6 09:00:44 PinkyPie kernel: ata7.00: failed command: READ FPDMA QUEUED Apr 6 09:00:44 PinkyPie kernel: ata7.00: cmd 60/c0:c0:40:c9:3a/00:00:2a:00:00/40 tag 24 ncq dma 98304 in Apr 6 09:00:44 PinkyPie kernel: ata7.00: status: { DRDY } Apr 6 09:00:44 PinkyPie kernel: ata7: hard resetting link Apr 6 09:00:54 PinkyPie kernel: ata7: softreset failed (device not ready) Apr 6 09:00:54 PinkyPie kernel: ata7: hard resetting link Apr 6 09:00:56 PinkyPie kernel: ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 310) Apr 6 09:00:56 PinkyPie kernel: ata7.00: supports DRM functions and may not be fully accessible Apr 6 09:00:56 PinkyPie kernel: ata7.00: supports DRM functions and may not be fully accessible Apr 6 09:00:57 PinkyPie kernel: ata7.00: configured for UDMA/33 Apr 6 09:00:57 PinkyPie kernel: sd 7:0:0:0: [sdh] tag#3 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 Apr 6 09:00:57 PinkyPie kernel: sd 7:0:0:0: [sdh] tag#3 Sense Key : 0x5 [current] Apr 6 09:00:57 PinkyPie kernel: sd 7:0:0:0: [sdh] tag#3 ASC=0x21 ASCQ=0x4 Apr 6 09:00:57 PinkyPie kernel: sd 7:0:0:0: [sdh] tag#3 CDB: opcode=0x88 88 00 00 00 00 00 2a 3a ba 00 00 00 05 a8 00 00 Apr 6 09:00:57 PinkyPie kernel: print_req_error: I/O error, dev sdh, sector 708491776 Apr 6 09:00:57 PinkyPie kernel: sd 7:0:0:0: [sdh] tag#4 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 Apr 6 09:00:57 PinkyPie kernel: sd 7:0:0:0: [sdh] tag#4 Sense Key : 0x5 [current] Apr 6 09:00:57 PinkyPie kernel: sd 7:0:0:0: [sdh] tag#4 ASC=0x21 ASCQ=0x4 Apr 6 09:00:57 PinkyPie kernel: sd 7:0:0:0: [sdh] tag#4 CDB: opcode=0x88 88 00 00 00 00 00 2a 3a bf a8 00 00 04 58 00 00 Apr 6 09:00:57 PinkyPie kernel: print_req_error: I/O error, dev sdh, sector 708493224 Apr 6 09:00:57 PinkyPie kernel: sd 7:0:0:0: [sdh] tag#23 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 Apr 6 09:00:57 PinkyPie kernel: sd 7:0:0:0: [sdh] tag#23 Sense Key : 0x5 [current] Apr 6 09:00:57 PinkyPie kernel: sd 7:0:0:0: [sdh] tag#23 ASC=0x21 ASCQ=0x4 Apr 6 09:00:57 PinkyPie kernel: sd 7:0:0:0: [sdh] tag#23 CDB: opcode=0x88 88 00 00 00 00 00 2a 3a c4 00 00 00 05 40 00 00 Apr 6 09:00:57 PinkyPie kernel: print_req_error: I/O error, dev sdh, sector 708494336 Apr 6 09:00:57 PinkyPie kernel: sd 7:0:0:0: [sdh] tag#24 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 Apr 6 09:00:57 PinkyPie kernel: sd 7:0:0:0: [sdh] tag#24 Sense Key : 0x5 [current] Apr 6 09:00:57 PinkyPie kernel: sd 7:0:0:0: [sdh] tag#24 ASC=0x21 ASCQ=0x4 Apr 6 09:00:57 PinkyPie kernel: sd 7:0:0:0: [sdh] tag#24 CDB: opcode=0x88 88 00 00 00 00 00 2a 3a c9 40 00 00 00 c0 00 00 Apr 6 09:00:57 PinkyPie kernel: print_req_error: I/O error, dev sdh, sector 708495680 Apr 6 09:00:57 PinkyPie kernel: ata7: EH complete Apr 6 09:23:10 PinkyPie kernel: ata7.00: exception Emask 0x10 SAct 0x46088000 SErr 0x10200 action 0xe frozen Apr 6 09:23:10 PinkyPie kernel: ata7.00: irq_stat 0x00400000, PHY RDY changed Apr 6 09:23:10 PinkyPie kernel: ata7: SError: { Persist PHYRdyChg } Apr 6 09:23:10 PinkyPie kernel: ata7.00: failed command: READ FPDMA QUEUED Apr 6 09:23:10 PinkyPie kernel: ata7.00: cmd 60/01:78:82:f9:b6/00:00:7c:00:00/40 tag 15 ncq dma 512 in Apr 6 09:23:10 PinkyPie kernel: ata7.00: status: { DRDY } Apr 6 09:23:10 PinkyPie kernel: ata7.00: failed command: READ FPDMA QUEUED Apr 6 09:23:10 PinkyPie kernel: ata7.00: cmd 60/01:98:94:f3:0a/00:00:c2:00:00/40 tag 19 ncq dma 512 in Apr 6 09:23:10 PinkyPie kernel: ata7.00: status: { DRDY } Apr 6 09:23:10 PinkyPie kernel: ata7.00: failed command: READ FPDMA QUEUED Apr 6 09:23:10 PinkyPie kernel: ata7.00: cmd 60/70:c8:00:ca:df/05:00:3f:00:00/40 tag 25 ncq dma 712704 in Apr 6 09:23:10 PinkyPie kernel: ata7.00: status: { DRDY } Apr 6 09:23:10 PinkyPie kernel: ata7.00: failed command: READ FPDMA QUEUED Apr 6 09:23:10 PinkyPie kernel: ata7.00: cmd 60/90:d0:70:cf:df/04:00:3f:00:00/40 tag 26 ncq dma 598016 in Apr 6 09:23:10 PinkyPie kernel: ata7.00: status: { DRDY } Apr 6 09:23:10 PinkyPie kernel: ata7.00: failed command: READ FPDMA QUEUED Apr 6 09:23:10 PinkyPie kernel: ata7.00: cmd 60/01:f0:69:7b:82/00:00:0c:00:00/40 tag 30 ncq dma 512 in Apr 6 09:23:10 PinkyPie kernel: ata7.00: status: { DRDY } Apr 6 09:23:10 PinkyPie kernel: ata7: hard resetting link Apr 6 09:23:20 PinkyPie kernel: ata7: softreset failed (device not ready) Apr 6 09:23:20 PinkyPie kernel: ata7: hard resetting link Apr 6 09:23:22 PinkyPie kernel: ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 310) Apr 6 09:23:22 PinkyPie kernel: ata7.00: supports DRM functions and may not be fully accessible Apr 6 09:23:22 PinkyPie kernel: ata7.00: supports DRM functions and may not be fully accessible Apr 6 09:23:22 PinkyPie kernel: ata7.00: configured for UDMA/33 Apr 6 09:23:22 PinkyPie kernel: sd 7:0:0:0: [sdh] tag#25 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 Apr 6 09:23:22 PinkyPie kernel: sd 7:0:0:0: [sdh] tag#25 Sense Key : 0x5 [current] Apr 6 09:23:22 PinkyPie kernel: sd 7:0:0:0: [sdh] tag#25 ASC=0x21 ASCQ=0x4 Apr 6 09:23:22 PinkyPie kernel: sd 7:0:0:0: [sdh] tag#25 CDB: opcode=0x88 88 00 00 00 00 00 3f df ca 00 00 00 05 70 00 00 Apr 6 09:23:22 PinkyPie kernel: print_req_error: I/O error, dev sdh, sector 1071630848 Apr 6 09:23:22 PinkyPie kernel: sd 7:0:0:0: [sdh] tag#26 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 Apr 6 09:23:22 PinkyPie kernel: sd 7:0:0:0: [sdh] tag#26 Sense Key : 0x5 [current] Apr 6 09:23:22 PinkyPie kernel: sd 7:0:0:0: [sdh] tag#26 ASC=0x21 ASCQ=0x4 Apr 6 09:23:22 PinkyPie kernel: sd 7:0:0:0: [sdh] tag#26 CDB: opcode=0x88 88 00 00 00 00 00 3f df cf 70 00 00 04 90 00 00 Apr 6 09:23:22 PinkyPie kernel: print_req_error: I/O error, dev sdh, sector 1071632240 Apr 6 09:23:22 PinkyPie kernel: ata7: EH complete Apr 6 09:23:25 PinkyPie kernel: ata7.00: exception Emask 0x10 SAct 0xc00 SErr 0x40d0202 action 0xe frozen Apr 6 09:23:25 PinkyPie kernel: ata7.00: irq_stat 0x00400000, PHY RDY changed Apr 6 09:23:25 PinkyPie kernel: ata7: SError: { RecovComm Persist PHYRdyChg CommWake 10B8B DevExch } Apr 6 09:23:25 PinkyPie kernel: ata7.00: failed command: READ FPDMA QUEUED Apr 6 09:23:25 PinkyPie kernel: ata7.00: cmd 60/c0:50:00:fa:e3/05:00:3f:00:00/40 tag 10 ncq dma 753664 in Apr 6 09:23:25 PinkyPie kernel: ata7.00: status: { DRDY } Apr 6 09:23:25 PinkyPie kernel: ata7.00: failed command: READ FPDMA QUEUED Apr 6 09:23:25 PinkyPie kernel: ata7.00: cmd 60/40:58:c0:ff:e3/04:00:3f:00:00/40 tag 11 ncq dma 557056 in Apr 6 09:23:25 PinkyPie kernel: ata7.00: status: { DRDY } Apr 6 09:23:25 PinkyPie kernel: ata7: hard resetting link Apr 6 09:23:35 PinkyPie kernel: ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 310) Apr 6 09:23:35 PinkyPie kernel: ata7.00: supports DRM functions and may not be fully accessible Apr 6 09:23:36 PinkyPie kernel: ata7.00: supports DRM functions and may not be fully accessible Apr 6 09:23:37 PinkyPie kernel: ata7.00: configured for UDMA/33 Apr 6 09:23:37 PinkyPie kernel: sd 7:0:0:0: [sdh] tag#10 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 Apr 6 09:23:37 PinkyPie kernel: sd 7:0:0:0: [sdh] tag#10 Sense Key : 0x5 [current] Apr 6 09:23:37 PinkyPie kernel: sd 7:0:0:0: [sdh] tag#10 ASC=0x21 ASCQ=0x4 Apr 6 09:23:37 PinkyPie kernel: sd 7:0:0:0: [sdh] tag#10 CDB: opcode=0x88 88 00 00 00 00 00 3f e3 fa 00 00 00 05 c0 00 00 Apr 6 09:23:37 PinkyPie kernel: print_req_error: I/O error, dev sdh, sector 1071905280 Apr 6 09:23:37 PinkyPie kernel: sd 7:0:0:0: [sdh] tag#11 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 Apr 6 09:23:37 PinkyPie kernel: sd 7:0:0:0: [sdh] tag#11 Sense Key : 0x5 [current] Apr 6 09:23:37 PinkyPie kernel: sd 7:0:0:0: [sdh] tag#11 ASC=0x21 ASCQ=0x4 Apr 6 09:23:37 PinkyPie kernel: sd 7:0:0:0: [sdh] tag#11 CDB: opcode=0x88 88 00 00 00 00 00 3f e3 ff c0 00 00 04 40 00 00 Apr 6 09:23:37 PinkyPie kernel: print_req_error: I/O error, dev sdh, sector 1071906752 Apr 6 09:23:37 PinkyPie kernel: ata7: EH complete

I have replaced cables, going to try a new power supply in a few days but not sure that will make a difference as they power up just fine. Any other ideas why they would just go wonky like that after a couple hundred GB written in parity? and both around the same time. I will try and connect them to the Marvell see if it makes a difference . Until then i have started a pre-clear on it and funny thin is it has been running fine on the pre-read stage, 1.5hrs, 8% done.. was crashing at 15 mins when trying to add it as parity drive. still had quite a bit of "hard resetting link" in the logs for that drive for the first hour, but none in the past hour, maybe a power issue? when the system is under heavy load i got power fluctuation issues? The other drive that is just sitting there doing nothing also has same issues, its connected but not added to the array or anything else, Soft resets then sometimes negotiates at 6Gbps, others 3.0 or 1.5... they are plugged in the built in sata on the mobo, where i had the ssd's before. there is a total of 8 onboard sata.. maybe the extra load of having them all populated now is an issue? but i do not get any errors at all on the 6 other sata ports where my 4TB and 1 ssd are plugged in.. no resets. only on these new 8TB WD drives. I will prob try and connect them to the PCI sata card i got but i only got a 1X since i was only going to use it for 1 SSD.. won't have enough bandwidth to support 2 Harddrives at PCIEv2. Apr 6 08:18:45 PinkyPie kernel: ata8: softreset failed (device not ready) Apr 6 08:18:46 PinkyPie kernel: ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 300) Apr 6 08:18:46 PinkyPie kernel: ata8.00: supports DRM functions and may not be fully accessible Apr 6 08:18:46 PinkyPie kernel: ata8.00: supports DRM functions and may not be fully accessible Apr 6 08:18:47 PinkyPie kernel: ata8.00: configured for UDMA/133 Apr 6 08:18:57 PinkyPie kernel: ata8: SATA link down (SStatus 0 SControl 300) Apr 6 08:18:58 PinkyPie kernel: ata8: SATA link down (SStatus 0 SControl 300) Apr 6 08:19:09 PinkyPie kernel: ata8: softreset failed (device not ready) Apr 6 08:19:10 PinkyPie kernel: ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 300) Apr 6 08:19:10 PinkyPie kernel: ata8.00: supports DRM functions and may not be fully accessible Apr 6 08:19:10 PinkyPie kernel: ata8.00: supports DRM functions and may not be fully accessible Apr 6 08:19:10 PinkyPie kernel: ata8.00: configured for UDMA/133 Apr 6 08:19:21 PinkyPie kernel: ata8: SATA link down (SStatus 0 SControl 300) Apr 6 08:19:21 PinkyPie kernel: ata8: illegal qc_active transition (00000000->00000001) Apr 6 08:19:31 PinkyPie kernel: ata8: softreset failed (device not ready) Apr 6 08:19:32 PinkyPie kernel: ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 300) Apr 6 08:19:32 PinkyPie kernel: ata8.00: supports DRM functions and may not be fully accessible Apr 6 08:19:32 PinkyPie kernel: ata8.00: supports DRM functions and may not be fully accessible Apr 6 08:19:33 PinkyPie kernel: ata8.00: configured for UDMA/133 Apr 6 08:20:46 PinkyPie kernel: ata8: limiting SATA link speed to 3.0 Gbps Apr 6 08:20:56 PinkyPie kernel: ata8: softreset failed (device not ready) Apr 6 08:20:57 PinkyPie kernel: ata8: SATA link down (SStatus 0 SControl 320) Apr 6 08:20:58 PinkyPie kernel: ata8: SATA link down (SStatus 0 SControl 320) Apr 6 08:21:08 PinkyPie kernel: ata8: softreset failed (device not ready) Apr 6 08:21:10 PinkyPie kernel: ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 320) Apr 6 08:21:10 PinkyPie kernel: ata8.00: supports DRM functions and may not be fully accessible Apr 6 08:21:10 PinkyPie kernel: ata8.00: supports DRM functions and may not be fully accessible Apr 6 08:21:10 PinkyPie kernel: ata8.00: configured for UDMA/133 Apr 6 08:22:04 PinkyPie kernel: ata8: softreset failed (device not ready) Apr 6 08:22:05 PinkyPie kernel: ata8: SATA link down (SStatus 0 SControl 320) Apr 6 08:22:15 PinkyPie kernel: ata8: softreset failed (device not ready) Apr 6 08:22:16 PinkyPie kernel: ata8: SATA link down (SStatus 0 SControl 320) Apr 6 08:22:20 PinkyPie kernel: ata8: SATA link down (SStatus 0 SControl 320) Apr 6 08:22:20 PinkyPie kernel: ata8.00: disabled Apr 6 08:22:20 PinkyPie kernel: ata8.00: detaching (SCSI 8:0:0:0) Apr 6 08:22:30 PinkyPie kernel: ata8: softreset failed (device not ready) Apr 6 08:22:31 PinkyPie kernel: ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 6 08:22:32 PinkyPie kernel: ata8.00: supports DRM functions and may not be fully accessible Apr 6 08:22:32 PinkyPie kernel: ata8.00: ATA-9: WDC WD80EZAZ-11TDBA0, 1EJAZZPZ, 83.H0A83, max UDMA/133 Apr 6 08:22:32 PinkyPie kernel: ata8.00: 15628053168 sectors, multi 0: LBA48 NCQ (depth 32), AA Apr 6 08:22:33 PinkyPie kernel: ata8.00: supports DRM functions and may not be fully accessible Apr 6 08:22:33 PinkyPie kernel: ata8.00: configured for UDMA/133 Apr 6 08:22:33 PinkyPie kernel: sd 8:0:0:0: [sdi] 15628053168 512-byte logical blocks: (8.00 TB/7.28 TiB) Apr 6 08:22:33 PinkyPie kernel: sd 8:0:0:0: [sdi] 4096-byte physical blocks Apr 6 08:22:33 PinkyPie kernel: sd 8:0:0:0: [sdi] Write Protect is off Apr 6 08:22:33 PinkyPie kernel: sd 8:0:0:0: [sdi] Mode Sense: 00 3a 00 00 Apr 6 08:22:33 PinkyPie kernel: sd 8:0:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Apr 6 08:22:33 PinkyPie kernel: sdi: sdi1 Apr 6 08:22:33 PinkyPie kernel: sd 8:0:0:0: [sdi] Attached SCSI disk Apr 6 08:26:20 PinkyPie kernel: ata8: softreset failed (device not ready) Apr 6 08:26:22 PinkyPie kernel: ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 300) Apr 6 08:26:22 PinkyPie kernel: ata8.00: supports DRM functions and may not be fully accessible Apr 6 08:26:22 PinkyPie kernel: ata8.00: supports DRM functions and may not be fully accessible Apr 6 08:26:22 PinkyPie kernel: ata8.00: configured for UDMA/133 Apr 6 08:26:25 PinkyPie kernel: ata8: SATA link down (SStatus 0 SControl 300) Apr 6 08:26:35 PinkyPie kernel: ata8: softreset failed (device not ready) Apr 6 08:26:36 PinkyPie kernel: ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 300) Apr 6 08:26:36 PinkyPie kernel: ata8.00: supports DRM functions and may not be fully accessible Apr 6 08:26:36 PinkyPie kernel: ata8.00: supports DRM functions and may not be fully accessible Apr 6 08:26:36 PinkyPie kernel: ata8.00: configured for UDMA/133 Apr 6 08:26:39 PinkyPie kernel: ata8: SATA link down (SStatus 0 SControl 300) Apr 6 08:26:49 PinkyPie kernel: ata8: softreset failed (device not ready) Apr 6 08:26:50 PinkyPie kernel: ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 300) Apr 6 08:26:50 PinkyPie kernel: ata8.00: supports DRM functions and may not be fully accessible Apr 6 08:26:51 PinkyPie kernel: ata8.00: supports DRM functions and may not be fully accessible Apr 6 08:26:52 PinkyPie kernel: ata8.00: configured for UDMA/133 Apr 6 08:53:12 PinkyPie kernel: ata8: softreset failed (device not ready) Apr 6 08:53:13 PinkyPie kernel: ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 300) Apr 6 08:53:13 PinkyPie kernel: ata8.00: supports DRM functions and may not be fully accessible Apr 6 08:53:13 PinkyPie kernel: ata8.00: supports DRM functions and may not be fully accessible Apr 6 08:53:13 PinkyPie kernel: ata8.00: configured for UDMA/133 Apr 6 08:53:31 PinkyPie kernel: ata8: SATA link down (SStatus 0 SControl 300) Apr 6 08:53:41 PinkyPie kernel: ata8: softreset failed (device not ready) Apr 6 08:53:42 PinkyPie kernel: ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 300) Apr 6 08:53:42 PinkyPie kernel: ata8.00: supports DRM functions and may not be fully accessible Apr 6 08:53:42 PinkyPie kernel: ata8.00: supports DRM functions and may not be fully accessible Apr 6 08:53:42 PinkyPie kernel: ata8.00: configured for UDMA/133 Apr 6 08:55:31 PinkyPie kernel: ata8: softreset failed (device not ready) Apr 6 08:55:32 PinkyPie kernel: ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 300) Apr 6 08:55:32 PinkyPie kernel: ata8.00: supports DRM functions and may not be fully accessible Apr 6 08:55:34 PinkyPie kernel: ata8.00: supports DRM functions and may not be fully accessible Apr 6 08:55:34 PinkyPie kernel: ata8.00: configured for UDMA/133 Apr 6 08:56:02 PinkyPie kernel: ata8: limiting SATA link speed to 3.0 Gbps Apr 6 08:56:12 PinkyPie kernel: ata8: softreset failed (device not ready) Apr 6 08:56:14 PinkyPie kernel: ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 320) Apr 6 08:56:14 PinkyPie kernel: ata8.00: supports DRM functions and may not be fully accessible Apr 6 08:56:14 PinkyPie kernel: ata8.00: supports DRM functions and may not be fully accessible Apr 6 08:56:14 PinkyPie kernel: ata8.00: configured for UDMA/133 Apr 6 08:57:41 PinkyPie kernel: ata8: softreset failed (device not ready) Apr 6 08:57:43 PinkyPie kernel: ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 320) Apr 6 08:57:43 PinkyPie kernel: ata8.00: supports DRM functions and may not be fully accessible Apr 6 08:57:44 PinkyPie kernel: ata8.00: supports DRM functions and may not be fully accessible Apr 6 08:57:45 PinkyPie kernel: ata8.00: configured for UDMA/133 Apr 6 08:57:50 PinkyPie kernel: ata8: SATA link down (SStatus 0 SControl 320) Apr 6 08:57:52 PinkyPie kernel: ata8: SATA link down (SStatus 0 SControl 320) Apr 6 08:58:02 PinkyPie kernel: ata8: softreset failed (device not ready) Apr 6 08:58:04 PinkyPie kernel: ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 320) Apr 6 08:58:04 PinkyPie kernel: ata8.00: supports DRM functions and may not be fully accessible Apr 6 08:58:04 PinkyPie kernel: ata8.00: supports DRM functions and may not be fully accessible Apr 6 08:58:04 PinkyPie kernel: ata8.00: configured for UDMA/133 Apr 6 08:59:54 PinkyPie kernel: ata8: SATA link down (SStatus 0 SControl 320) Apr 6 09:00:04 PinkyPie kernel: ata8: softreset failed (device not ready) Apr 6 09:00:06 PinkyPie kernel: ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 320) Apr 6 09:00:06 PinkyPie kernel: ata8.00: supports DRM functions and may not be fully accessible Apr 6 09:00:06 PinkyPie kernel: ata8.00: supports DRM functions and may not be fully accessible Apr 6 09:00:06 PinkyPie kernel: ata8.00: configured for UDMA/133 Apr 6 09:00:08 PinkyPie kernel: ata8: limiting SATA link speed to 1.5 Gbps Apr 6 09:00:18 PinkyPie kernel: ata8: softreset failed (device not ready) Apr 6 09:00:19 PinkyPie kernel: ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 310) Apr 6 09:00:20 PinkyPie kernel: ata8.00: supports DRM functions and may not be fully accessible Apr 6 09:00:20 PinkyPie kernel: ata8.00: supports DRM functions and may not be fully accessible Apr 6 09:00:21 PinkyPie kernel: ata8.00: configured for UDMA/133 Apr 6 09:01:10 PinkyPie kernel: ata8: softreset failed (device not ready) Apr 6 09:01:11 PinkyPie kernel: ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 310) Apr 6 09:01:11 PinkyPie kernel: ata8.00: supports DRM functions and may not be fully accessible Apr 6 09:01:11 PinkyPie kernel: ata8.00: supports DRM functions and may not be fully accessible Apr 6 09:01:12 PinkyPie kernel: ata8.00: configured for UDMA/133 Apr 6 09:01:39 PinkyPie kernel: ata8: softreset failed (device not ready) Apr 6 09:01:40 PinkyPie kernel: ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 310) Apr 6 09:01:40 PinkyPie kernel: ata8.00: supports DRM functions and may not be fully accessible Apr 6 09:01:40 PinkyPie kernel: ata8.00: supports DRM functions and may not be fully accessible Apr 6 09:01:40 PinkyPie kernel: ata8.00: configured for UDMA/133 Apr 6 09:03:13 PinkyPie kernel: ata8: SATA link down (SStatus 0 SControl 310) Apr 6 09:03:23 PinkyPie kernel: ata8: softreset failed (device not ready) Apr 6 09:03:24 PinkyPie kernel: ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 310) Apr 6 09:03:24 PinkyPie kernel: ata8.00: supports DRM functions and may not be fully accessible Apr 6 09:03:26 PinkyPie kernel: ata8.00: supports DRM functions and may not be fully accessible Apr 6 09:03:26 PinkyPie kernel: ata8.00: configured for UDMA/133 Apr 6 09:23:07 PinkyPie kernel: ata8: softreset failed (device not ready) Apr 6 09:23:08 PinkyPie kernel: ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 310) Apr 6 09:23:08 PinkyPie kernel: ata8.00: supports DRM functions and may not be fully accessible Apr 6 09:23:08 PinkyPie kernel: ata8.00: supports DRM functions and may not be fully accessible Apr 6 09:23:08 PinkyPie kernel: ata8.00: configured for UDMA/133 Apr 6 09:23:19 PinkyPie kernel: ata8: softreset failed (device not ready) Apr 6 09:23:20 PinkyPie kernel: ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 310) Apr 6 09:23:20 PinkyPie kernel: ata8.00: supports DRM functions and may not be fully accessible Apr 6 09:23:22 PinkyPie kernel: ata8.00: supports DRM functions and may not be fully accessible Apr 6 09:23:22 PinkyPie kernel: ata8.00: failed to enable AA (error_mask=0x100) Apr 6 09:23:22 PinkyPie kernel: ata8.00: revalidation failed (errno=-5) Apr 6 09:23:33 PinkyPie kernel: ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 310) Apr 6 09:23:33 PinkyPie kernel: ata8.00: supports DRM functions and may not be fully accessible Apr 6 09:23:35 PinkyPie kernel: ata8.00: supports DRM functions and may not be fully accessible Apr 6 09:23:35 PinkyPie kernel: ata8.00: configured for UDMA/133

******UPDATE***** Problem solved by moving the 8TB disk to the Marvell controller, great stable connection and no need for new power supply. Decent parity rebuild times also @ ~180M Thanks for the input and help guys.B/s. *************************** I am trying to extend my unraid array by adding a few new 8TB drives, they are shucked WD My books (Model family:WDC HGST Ultrastar He10, Device model:WDC WD80EZAZ-11TDBA0) Partity rebuild fails on either one I try to use about 1.5% into the rebuild. Read errors it seems? maxes out the read error's in the GUI. I have attached the syslog file, hoping someone can point me in the right direction, currently trying to rebuild parity with my original 4TB HGST drive.(hoping that it goes through) Unraid V6.8.3 Gigabyte F2A85XM-HD3 AMD A10-5800K 8GB Ram IOCrest SI-PEX40064(Marvell 88SE9215) <-- only 1 SSD connected to it 500W PSU Total of 7 Sata Hard drives and 2 SSD. diagnostics-20200405-1344.zip

Can anyone tell me if its possible to add a second path to the rtorrent docker? I ask because i would like my incoming torrents to be saved to a certain path, then moved to a secondary one for archive/seeding.

Is anyone else having issues with the Delete RAR contents post processing option? It leaves the unpacked file in the unpack directory after the copy instead of deleting it. Seems it was a bug as per: https://github.com/SickRage/SickRage/issues/3361 Anyone else having the issue? Delete RAR contents delete content of RAR files, even if Process Method not set to move? note: only working with RAR archive