davper

Diagnostics attached tower-diagnostics-20251110-0923.zip

Hi I have been experiencing server failures forcing me to do hard boots. My syslog has no logging for 24 hours until 16:03 tonight. Then no logging for 90 minutes before failure. Nov 8 16:36:38 Tower Parity Check Tuning: ... but suppressed as system notifications do not appear to be enabled Nov 9 16:03:54 Tower root: /mnt/cache_download: 931.5 GiB (1000203837440 bytes) trimmed on /dev/sdg1 Nov 9 16:03:54 Tower root: /var/lib/docker/btrfs: 6.6 GiB (7104176128 bytes) trimmed on /dev/loop2[/btrfs] Nov 9 16:03:55 Tower kernel: sd 9:0:5:0: [sdg] tag#435 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=DRIVER_OK cmd_age=1s Nov 9 16:03:55 Tower kernel: sd 9:0:5:0: [sdg] tag#435 Sense Key : 0x5 [current] Nov 9 16:03:55 Tower kernel: sd 9:0:5:0: [sdg] tag#435 ASC=0x21 ASCQ=0x0 Nov 9 16:03:55 Tower kernel: sd 9:0:5:0: [sdg] tag#435 CDB: opcode=0x42 42 00 00 00 00 00 00 00 18 00 Nov 9 16:03:55 Tower kernel: critical target error, dev sdg, sector 1951699269 op 0x3:(DISCARD) flags 0x0 phys_seg 1 prio class 0 Nov 9 16:06:52 Tower root: /mnt/cache_protected: 83.0 GiB (89162940416 bytes) trimmed on /dev/sde1, /dev/sdh1 Nov 9 17:40:39 Tower rc.rsyslogd: Syslog server daemon... Started. Is this the reason my server is failing or should I be looking for something else? Nov 9 16:03:55 Tower kernel: critical target error, dev sdg, sector 1951699269 op 0x3:(DISCARD) flags 0x0 phys_seg 1 prio class 0

Hi I created my shares sometime ago before the trash guides. And so I have seperate shares for downloads, TV, and movies. I would like to change it to follow the trash guides folder stucture: How can I move the data from the old shares into a new share efficiently? I thought about rsync, but it only makes a copy and doesn't delete the old file after.

bumpp

{"error":"Key Not Found"}

This is the error I am getting when I try to use my key

Great link for support. It says to come here to get help, pay for 1on1 support, or a link to outdated instructions to change my key. I submitted the form to contact support.

I do, but the link I enter from the email is not working.

The only license key file I have is the trial key. The contents of my config folder got corruted.

I was able to install Unraid connect without getting the array started. But I still can't get my license. I found my email with the original license key. But that is not working. I am using the same USB drive.

My server failed and the config folder got corrupted. I can't find where my license is on my account to enter it in. It looks like I need to install a plug-in but I can't start the array to install a plug-in because it says my trial has expired almost 3 years ago. I tried extending the trial but nothing happened.

It changes to Tower.. But why wouldn't it remember any of my drives and configs? I thought that was what replacing the config folder would do? As of now, I have a flesh install of unraid amd itlooks like I need to build a new array from scratch.

It looks like I fat fingered the I address when I was recreating the USB. I change the IP in network.cfg and renamed it backto network.cfg and it is loading into the correct IP. But my issue with towertest is still there. It recognizes nothing of the old server despite me replacing the config folder from the old USB.

Hi The dates look correct to me. Some files were created years ago when I 1st created my server. But many are from the last 2 days, when I tried to recreate the USB. The network.cfg file did not get recreated. Per earlier instructions, I renamed the networkconfig file. Chkdsk did not find anny errors

Don't understand why, here is the configuration I used to recreate the USB

I have not defined any IPs in my router other than a range that can be assigned when asked for an address.

Sorry it took too long. Work and family has to come 1st. It booted into a random IP and is still towertest towertest-diagnostics-20231120-1816.zip

I believe this is what you are asking for towertest-diagnostics-20231120-0757.zip

Oh, and I copied my config folder bac to the usb.

My MB died and I replaced it with the exact model. When I boot into unraid using the old USB, it is loading to the wrong IP and has the name of towertest. So I copied my Config file and reinstalled the OS using the downloader utility. I changed my IP to the correct number and made sure the name is Tower. But when I bootup, it is still on the wrong IP and has Towertest as the server name. What am I doing wrong?

After installing the non-plex pass version, can I just copy over my old database?

Hi Solved the issue. My wan IP had changed and that 1 subdomain(www) did not get updated at cloudflare. Once I changed the setting to get the ip from ddns subdomain, it was working again. All other subdomains were working fine.

Hi I was getting an emergency error most likely caused by me making a config change to add wordpress. So I restored from a recent backup. I am now getting this upon start: Certbot failed to authenticate some domains (authenticator: standalone). The Certificate Authority reported these problems: Domain: www.xxxxxx.com Type: connection Detail: Fetching http://www.xxxxxx.com/.well-known/acme-challenge/E0JYqMtNJ18FUDxUh7QYKjjq5DMu516AONQvPJA0hPg: Timeout during connect (likely firewall problem) Hint: The Certificate Authority failed to download the challenge files from the temporary standalone webserver started by Certbot on port 80. Ensure that the listed domains point to this machine and that it can accept inbound connections from the internet. I check my pfSense and nothing has changed since I got swag running a few weeks ago. I have 80 forwarded to port 180 and 443 forwarded to 1443. Is there something else I should be looking at? my full swag log ErrorWarningSystemArrayLogin [s6-init] making user provided files available at /var/run/s6/etc...exited 0. [s6-init] ensuring user provided files have correct perms...exited 0. [fix-attrs.d] applying ownership & permissions fixes... [fix-attrs.d] done. [cont-init.d] executing container initialization scripts... [cont-init.d] 01-envfile: executing... [cont-init.d] 01-envfile: exited 0. [cont-init.d] 10-adduser: executing... ------------------------------------- _ () | | ___ _ __ | | / __| | | / \ | | \__ \ | | | () | |_| |___/ |_| \__/ Brought to you by linuxserver.io ------------------------------------- To support the app dev(s) visit: Certbot: https://supporters.eff.org/donate/support-work-on-certbot To support LSIO projects visit: https://www.linuxserver.io/donate/ ------------------------------------- GID/UID ------------------------------------- User uid: 99 User gid: 100 ------------------------------------- [cont-init.d] 10-adduser: exited 0. [cont-init.d] 20-config: executing... [cont-init.d] 20-config: exited 0. [cont-init.d] 30-keygen: executing... using keys found in /config/keys [cont-init.d] 30-keygen: exited 0. [cont-init.d] 50-config: executing... Variables set: PUID=99 PGID=100 TZ=America/New_York URL=xxxxxx.com SUBDOMAINS=www,ddns,cloud,bw,sonarr EXTRA_DOMAINS= ONLY_SUBDOMAINS=true VALIDATION=http CERTPROVIDER= DNSPLUGIN= [email protected] STAGING=false Using Let's Encrypt as the cert provider SUBDOMAINS entered, processing SUBDOMAINS entered, processing Only subdomains, no URL in cert Sub-domains processed are: -d www.xxxxxx.com -d ddns.xxxxxx.com -d cloud.xxxxxx.com -d bw.xxxxxx.com -d sonarr.xxxxxx.com E-mail address entered: [email protected] http validation is selected Different validation parameters entered than what was used before. Revoking and deleting existing certificate, and an updated one will be created Generating new certificate Saving debug log to /var/log/letsencrypt/letsencrypt.log Account registered. Requesting a certificate for www.xxxxxx.com and 4 more domains Certbot failed to authenticate some domains (authenticator: standalone). The Certificate Authority reported these problems: Domain: www.xxxxxx.com Type: connection Detail: Fetching http://www.xxxxxx.com/.well-known/acme-challenge/E0JYqMtNJ18FUDxUh7QYKjjq5DMu516AONQvPJA0hPg: Timeout during connect (likely firewall problem) Hint: The Certificate Authority failed to download the challenge files from the temporary standalone webserver started by Certbot on port 80. Ensure that the listed domains point to this machine and that it can accept inbound connections from the internet. Some challenges have failed. Ask for help or search for solutions at https://community.letsencrypt.org. See the logfile /var/log/letsencrypt/letsencrypt.log or re-run Certbot with -v for more details. ERROR: Cert does not exist! Please see the validation error above. The issue may be due to incorrect dns or port forwarding settings. Please fix your settings and recreate the container

OK, so I shouldn't change my cache pool until mover has completed all files. got it.

...What happens if I still have files on the old share that has not been moved yet? Will the mover still be able to work if I change the pool for a share or will those files need to be moved manually?