clearzero

Hi DZMM. Thank you for the hard work on this. Much appreciated. I am posting this because I am having a problem getting it set up. I have used Rclone via PGBlitz and PlexGuide for like 4 years now and only post this to say this is not my first go with Rclone and a remote Gdrive set up. That said I am clearly missing something in getting this set up. Apologies if this has already been covered. 96 pages of a thread can be a beast. [Gdrive] type = drive client_id = {Private} client_secret = {Private} scope = drive.readonly token = {"access_token":"Obviously private"} team_drive = {I think this is also Private but it is the proper identifier for my Team Drive} root_folder_id = {left blank per instructions during set up} I think I should start here. I have run the script and it has crated a mount_mergefs folder with a sub folder named Gdrive but I can't see any files. It feels like I have missed something simple. Here is my script log which may be much more helpful. There are some errors that I can connect the dots on- /tmp/user.scripts/tmpScripts/rclone_mount/script: line 18: Gdrive: command not found 01.03.2021 21:05:20 INFO: Creating local folders. 01.03.2021 21:05:20 INFO: Creating MergerFS folders. 01.03.2021 21:05:20 INFO: *** Starting mount of remote 01.03.2021 21:05:20 INFO: Checking if this script is already running. 01.03.2021 21:05:20 INFO: Script not running - proceeding. 01.03.2021 21:05:20 INFO: *** Checking if online 01.03.2021 21:05:21 PASSED: *** Internet online 01.03.2021 21:05:21 INFO: Mount not running. Will now mount remote. 01.03.2021 21:05:21 INFO: Recreating mountcheck file for remote. 2021/03/01 21:05:21 DEBUG : rclone: Version "v1.54.0" starting with parameters ["rcloneorig" "--config" "/boot/config/plugins/rclone/.rclone.conf" "copy" "mountcheck" ":" "-vv" "--no-traverse"] 2021/03/01 21:05:21 DEBUG : Creating backend with remote "mountcheck" 2021/03/01 21:05:21 DEBUG : Using config file from "/boot/config/plugins/rclone/.rclone.conf" 2021/03/01 21:05:21 DEBUG : fs cache: adding new entry for parent of "mountcheck", "/usr/local/emhttp" 2021/03/01 21:05:21 DEBUG : Creating backend with remote ":" 2021/03/01 21:05:21 Failed to create file system for ":": config name contains invalid characters - may only contain 0-9, A-Z ,a-z ,_ , - and space 01.03.2021 21:05:21 INFO: *** Creating mount for remote 01.03.2021 21:05:21 INFO: sleeping for 5 seconds 2021/03/01 21:05:21 Failed to start remote control: start server failed: listen tcp 127.0.0.1:5572: bind: address already in use 01.03.2021 21:05:26 INFO: continuing... 01.03.2021 21:05:26 CRITICAL: mount failed - please check for problems. Stopping dockers radarr Error response from daemon: No such container: nzbget Error response from daemon: No such container: plex Error response from daemon: No such container: sonarr Error response from daemon: No such container: ombi Script Finished Mar 01, 2021 21:05.26 The line that says "config name contains invalid characters" has me stumped. I do not have a colon in the name of the script. it is just Gdrive. Seems like this may be the issue. Any help from DZMM or the group is appreciated. Thanks,

Just adding to the group. I have been using Unifi products for about a year and a half and they are exactly what I was looking for. My Ubiquiti purchases started with an EdgeRouter Pro 8 and a couple of AC AP's. That worked great but I decided I wanted everything to exist in the Unifi controller so I moved to the USG Pro. So far I have the following- USG Pro USW 48 POE USW XG (10 Gig Switch) USW 8 POE USW 8 (one of the new small switches that is powered over the POE port) (2) UAP AC Pro WAP's Most of this is complete overkill but I use this to test work related setups from time to time. For those that are looking to get into 10Gig I can say that Ubiquiti's option works great for me and is price competitive. There were some growing pains when I first got it but it has been rock solid for the last 6 months. My Unraid box and 3 PC's are all running 10Gig off that switch.

Thanks, I got it now. Figured out the problem. Hopefully. It's strange that you can get to the same place from 2 directions.

Unfortunately I don't even see /media in the settings in Sonarr. I suspect it is a mapping based on the container values. Based on the error, /media should be the "tv" folder in the container setting. Very odd.

I agree that it has to be a mapping issue. Here are my container settings. They look right. Sonarr NZBGET

Not sure if this is the same issue but I have been having issues after a new install. I went back to the LS version of Sonarr which helped a bit but I am getting a couple of errors. First error is triggered under the normal script to scan for new downloads and rename and move. I get this- Now, if I try to manually move the file I get this- I'm kind of lost at the moment.

Thanks for the link Squid. My search before posting was a little off target. So I read through your post and it makes sense. I think I am still doing something incorrect. Here is the section I think I replicated- Here are my settings- With these setting It is still out of sync somewhere. I feel like I am missing a step somewhere.

I had my boot USB go bad on Friday and unfortunately I didn't have a back up. So I started over and everything seems back to normal except one item. I can't get Sonarr to rename and move files. Everything seems to be set up correctly but here is the set up and the error- It looks like it is set up correctly but I seem to be doing something wrong. Any ideas?

I agree with this and point taken. My main concern is that I have had better performance in the past with the same hardware. If it's a hardware failure somewhere in the stack I am hoping to find that out. The dual parity comments are interesting. I run dual but don't think this is a change brought on by that transition. I made that jump 6-8 months ago. I will run a parity check this weekend to see how that responds. In the past I have gotten speeds of 80-110 pretty consistently.

Thanks for the responses all. Much appreciated. I also just did a test with Plex off and the results are basically the same. I didn't get the long periods with 0k but it dipped down to 12MB for periods here and there. I would be completely fine with an 80MB/s standard. It seems reasonable considering the setup. 12MB and lower are not normal. I have been using Unraid for a very long time and this isn't typical from my experience. I will try a few of the other suggestions to see if that affects things.

Third test. This one is Cache to Array. Similar results. I have one docker running,

Here is a second USB transfer. Slightly different results but still having issues.

Thanks for the reply Benson. Unfortunately I get this behavior regardless of the Chain. If I go from Cache to array or even local drive to array it is the same. I considered this but since the transfer speeds suffer in other configurations I figured it was probably not the issue.

I have been trying to research this problem for a couple of weeks, So far I have not found a viable solution. My file transfers are up and down but not consistently so. I don't see a pattern to them within a transfer session. What I mean by that is It doesn't appear to be RAM filling up then the slow down starts but who knows. Right now I am transferring large files (30GB each) from my local PC via a USB drive to the array, I get maximums of 115MB sec. all the way down to zero and everything in between. Here is what I have spec wise- unRAID system: unRAID server Pro, version 6.3.3 Model: Motherboard: Supermicro - X10SL7-F Processor: Intel® Xeon® CPU E3-1276 v3 @ 3.60GHz HVM: Enabled IOMMU: Enabled Cache: CPU Internal L1 = 256 kB (max. capacity 256 kB) CPU Internal L2 = 1024 kB (max. capacity 1024 kB) CPU Internal L3 = 8192 kB (max. capacity 8192 kB) Memory: 32 GB (max. installable capacity 32 GB) P0_Node0_Channel0_Dimm0 = 8192 MB, 1600 MHz P0_Node0_Channel0_Dimm1 = 8192 MB, 1600 MHz P0_Node0_Channel1_Dimm0 = 8192 MB, 1600 MHz P0_Node0_Channel1_Dimm1 = 8192 MB, 1600 MHz Network: eth0: 1000Mb/s, full duplex, mtu 1500 Kernel: Linux 4.9.19-unRAID x86_64 OpenSSL: 1.0.2k P + Q algorithm: NET (Registered protocol family 16 + avx2x4 (30406 MB/s) Uptime: 3 days, 22 hours, 56 minutes, 56 seconds I have been having the same issue on multiple point releases of Unraid so that may not be an issue. I have checked TRIM and run it manually with no change. My network is solid and since my peak rate is good I doubt that is an issue. Those are areas I have looked into. I know some SSD'd have had issues in the past. I have a 500GB Samsung 750 as my cache and have not heard anything chronic thus far. Any help is appreciated. I am attaching my diagnostic. Thanks- clearvideo-diagnostics-20170404-2012.zip EDIT: I just noticed something that may be a part of this. When I get these dips that go to zero I am also noticing the web UI is completely unresponsive and if I am trying to start a movie in Plex it has difficulties and sometimes won't begin playback At a minimum the buffering is significantly slower than normal. I was just in a situation where all three activities were going at once and everything stopped for about 20-30 seconds. EDIT #2: Here is a link to a capture of the transfer process. This one was more consistent than most. What you can't see is I have one local Plex stream going during this and one remote stream. EDIT #3 The first video wouldn't process on Youtube. Take 2.

Like others in this thread I have been doing this for what seems like forever. I use Plex for a few simple reasons. 1. I prefer ATV's (set top boxes in general) over a PC at the TV. I have done both extensively and a PC is tedious at this point. 2. The Plex UI, specifically on the ATV, is the best available. Plex in general is good but it is significantly better on ATV vs. say Android or Roku. 3. Remote streaming is a no brainer. I have roughly 5-10 remote streams going at any given time and it works great. Based on some of the posts here I recently installed Emby. So far I must say I don't know why I would want to use that over Plex. I don't see any advantages. The UI is rather terrible on the end points ( ATV and Roku) and the navigation is bad in comparison. I have about 3000 movies and getting to something specific is not fun. That said I haven't spent a ton of time with it so who knows.

If you can get 6A for $150 it's a no brainer. That is 5e pricing.

For whatever it is worth I actually do this for a living. I do large corporate buildouts for every large/gigantic tech company you can think of. Even in those environments Cat6A is rare. We have done multiple data centers that required 10G speed between switches and servers and used Cat6 without issue. You should be good. More important is the actual cable you buy. Any of the major brands will be good. Stay away from off brand stuff. Belden, Panduit, Commscope, etc... are safe bets.

You will have no issue getting 10GB at that distance. In a home environment you won't notice any difference if it is quality cable.

All space on the device is allocated, no new chunks can br created, try to delete something and running a balance: btrfs balance start -dusage=5 /mnt/cache If you get and out of space error, try deleting more files, the bigger the better, if the balances succeeds you'll get the allocated but unused space back. Thanks for the help Jonnie. I dumped a decent amount of stuff that wasn't needed, maybe 30GB, executed the balance command, and now I get this... btrfs fi show /mnt/cache Label: none uuid: 44e6e86c-5e0e-40a5-9ead-4137b7b72fcf Total devices 1 FS bytes used 98.36GiB devid 1 size 465.76GiB used 325.76GiB path /dev/sdg1 So what is happening here? Why is it showing a value that is not accurate?

I hope I don't need to go this route. That is a PIA. I swapped my old cache for this one about 3 months ago. It's been fine till recently.

Thanks Jonnie. Here they are-

Thanks Trurl. Attached clearvideo-diagnostics-20170205-1933.zip

I have been trying to get to the bottom of this for a few weeks now. I have a 500GB Cache drive that has about 300GB of free space on it. For some reason Unraid is reporting it as full. It is stopping SAB and pretty much all of my dockers at the moment. From everything I can tell there is plenty of space available. Here is the part that is really confusing me. If I go and delete a partial download from SAB, say 2 GB or so, the free space being reported in SAB jumps to 300GB+. As soon as I refill that 2 GB of space it flips to zero and stops. I believe I have set all minimums to 0 so that should not be an issue. I'm at a loss. Any help is appreciated.

Sonar works great. This is only for movies on my end. I haven't had any luck with CP or SAB automation. That would certainly solve the problem.

I will check that out. Thx.