dikkiedirk

Is it a modular psu? Then I would contact Seasonic customer service and ask them to send you a couple of sata power cables. You can replace a molex cable with it I think. I got them for my x-760 free of charge.

That was quick, thanks!

Hi, Does it matter to which SFF 8087 connectors in the Intel RES2CV360 an HBA is attached?

While there are 5 regular disks and one ARC 1200 RAID Volume on my server, only 4 disks, disk 2,3,4 and cache get benched. I attach diagnostics. [0:0:0:0] disk Generic- USB3.0 CRW -0 1.00 /dev/sda 3.90GB [0:0:0:1] disk Generic- USB3.0 CRW -1 1.00 /dev/sdb - [1:0:0:0] disk Areca ARC-1200-VOL R001 /dev/sdc 3.00TB [2:0:0:0] disk ATA ST2000DM001-1CH1 CC43 /dev/sdd 2.00TB [2:0:1:0] disk ATA Hitachi HDS72202 A20N /dev/sde 2.00TB [3:0:0:0] disk ATA ST2000DM001-1CH1 CC43 /dev/sdf 2.00TB [4:0:0:0] disk ATA ST9500325AS SDM1 /dev/sdg 500GB [5:0:0:0] disk ATA Hitachi HUA72202 A3FD /dev/sdh 2.00TB preclear-diagnostics-20180425-1355.zip

Sorry Squid. I jumped to conclusions too soon, I'm afraid. Will figure it out later.

So it is not possible to edit the /config path anymore? Why is that? And why is it still possible on the older install? So. the docker has indeed been changed? Besides I don't have a /complete mapping, I only see a /data mapping. And where are all those keys for?

Is the /config path now somehow hardcoded in this docker? On the docker page it doesn't show up and Host Path 1 seems to be missing. This is when newly setting up this docker on unraid 6.5.1-RC5 I want my finished download to end up in /mnt/user/media/DVD, /mnt/user/media/BluRay, /mnt/user/media/mkv etc. etc. How do I set this up? On a older install of this docker on a server that was updated to unraid 6.5.0 Host Path 1 does show up and the /config path is still editable, why is this changed in the current version of the docker? Or is something else going on?

Hi John, removing the the Sabnzb fixed the install issue for me. I am now on 60% memory utilization. One bigger issue I have is that while the Areca ARC-1200 is detected, the ports and disks connected to it are not seen, and the RAID1 volume is not benched because of that. Previous CLI versions would bench these volumes though.

Removed Sabnzb which was still running as a plugin and hugging all memory. Everything is OK now.

Can the docker image of 20 GB be too small? Or is it physical memory on the server? It only got 4 GB. How can I troubleshoot this?

Tried to install this docker with default settings on the docker page but see this error: Error: failed to register layer: ApplyLayer fork/exec /proc/self/exe: cannot allocate memory stdout: stderr: Should I change any setting or what else can be wrong? This server is running unraid 6.5.1-RC5, probably a compatibility issue. I installed this docker on a server running 6.5.0 without any issue.

Thanks all for this info. I managed to build this docker and set the media path to /mnt/user/Music, which is where my music is located. However the minimwatch icon turns red and I get a message that no content directory is found.

ok, thanks!

I like to follow your way and forget about dockerizing. Can you explain how you did it? Is the file you downloaded the right Linux build for unraid? Which folders need to be created and what files have to go where? and what command needs to be placed in the go file?

Hi, I try to built a docker from a raw dockerfile send to me by Sparklyballs. Unfortunately I get a warning when building: [WARNING]: Empty continuation line found in: RUN usermod -u 99 nobody && usermod -g 100 nobody && usermod -d /home nobody && chown -R nobody:users /home && apt-get update && apt-get install -y wget && mkdir -p /usr/bin/asset && chmod -R 777 /usr/bin/asset && cd /usr/bin/asset && wget http://www.dbpoweramp.com/install/AssetUPnP-Linux-x64.tar.gz && tar -zxvf *.gz && rm *.gz && apt-get purge --remove -y wget && apt-get autoremove -y && apt-get clean [WARNING]: Empty continuation lines will become errors in a future release. The docker doesn't seem to get build and when running it it shows: docker: Error response from daemon: oci runtime error: container_linux.go:265: s tarting container process caused "exec: \"/usr/bin/asset/bin/AssetUPnP\": stat / usr/bin/asset/bin/AssetUPnP: no such file or directory". Is something wrong with the dockerfile or is it unraid 6.4.0 which I'm currently running? When I try to add the docker on the docker page in unraid I get: [email protected]:# /usr/local/emhttp/plugins/dynamix.docker.manager/scripts/docker run -d --name="Asset-UPNP" --net="host" -e TZ="Europe/Berlin" -e HOST_OS="unRAID" sparklyballs/asset-upnp aa619a608337f4e150e84b2702851aa06650c3facdb282fb12ca34d629b83a5f /usr/bin/docker: Error response from daemon: oci runtime error: container_linux.go:265: starting container process caused "exec: "/usr/bin/asset/bin/AssetUPnP": stat /usr/bin/asset/bin/AssetUPnP: no such file or directory". The command failed.