Payyn

Members
 View Profile  See their activity

  • Posts

    9

  • Joined

  • Last visited

 Content Type 

Everything posted by Payyn

  1. Payyn
    Nope, using default settings. I tried turning up the voltage on the ram to 1.25, but really didn't see any change in stability so I went back to default settings. memtest and windows memory diagnostic test showed no errors. I have had better stability since I swapped out the motherboard, but the server randomly crashes. I was thinking maybe a heating issue so I put a fan on the ram. I think I have two issues now. Server crashing and now the usb flash drive is having problems probably due to the crashing.
  2. Payyn
    So I replaced the motherboard that states that using 4 sticks of my ddr5 ram is compatible. However, now I'm getting another error and the server gui is unresponsive. I've re-formatted the usb flash drive. I've repaired the usb using windows chkdsk feature. The server boots up fine, but then after an hour or two I get these errors. System Specs: 13th Gen Intel® Core™ i9-13900K MSI Z790 EDGE WIFI CORSAIR DOMINATOR PLATINUM RGB DDR5 RAM x4 sticks of 32gb (CMT64GX5M2B5200C40) syslog-192.168.1.47.log deathstar-diagnostics-20240423-1915.zip
  3. Payyn
    I switched to two sticks and still having issues. Default bios settings. syslog-192.168.1.47.log
  4. Payyn
    I'll defiantly get that info for you. Both system had different xmp profiles enabled. I started doing another memory test and there were some failures. I set both system bios back to default settings and currently running the latest memtest version on them. I was reading on some forum posts about memory issues on DDR5 and people are reporting that using all 4 slots causes some issues. However, I did read some people had success when manually overclocking and not using the XMP profiles.
  5. Payyn
    Hi I've been having issues with my servers. I have two almost identical servers. The only difference is the motherboard and ram. Both have very similar issues with Kernels. I'm not running any dockers and I've ran Ram tests 2 times with no issues. I've swapped out the usb thumb drives. Swapped out the power supply, ram, cooler, motherboard. I've had times where the server will stay up for hours, but it randomly will become unresponsive and I have to manually reboot the server. 1st Server: MSI Pro Z790-A Max with latest bios 13th Gen Intel i9-13900k Corsair iCUE H150i Elite CAPELLIX XT Desktop Liquid CPU Cooler Kingston FURY Beast RGB 64GB 5600MT/s DDR5 memory (4x32GB) be quiet! BN516 Straight Power 12-1000w x2 Nvidia Quadro P2000 GPU LSI 9200-8e 6Gbps 8-lane external SAS HBA P20 NetApp DS4246 Disk Array Shelf 2nd Server ASUS ProArt Z790-Creator with latest bios 13th Gen Intel i9-13900k Cooler Master Hyper 622 Halo Black Dual Tower CPU Air Cooler CORSAIR DOMINATOR PLATINUM RGB DDR5 RAM 64GB (4x32GB) 5200MHz be quiet! BN516 Straight Power 12-1000w All drives are directly connected to the motherboard deathstar-diagnostics-20240410-0819.zip
  6. Payyn
    I had this issue and it was due to using Firefox and Plex. When I would attempt to watch a movie using Firefox it would use a high amount of resources on either CPU and GPU to transcode. Shortly after the system would crash and become unresponsive. Using Google chrome on the same movies it worked fine. Still not sure why Firefox is causing the problem. Turned off all addons and cleared cookies.
  7. Payyn
    Did you ever find a fix for this? I have the same issue with that docker. The server was becoming unresponsive almost every night until I checked "Run scanner tasks at a lower priority" under the Library section. Since the change the server been running now for over 3 days without any issues. However, I still see the errors in my log.
  8. Payyn
    So I followed Spaceinvadorone's guide, but the mac doesn't have any internet access. I'm using an Asus Rampage IV Black Edition board which has Intel(R) 82579V Gigabit Network Connection. I was able to download open core during the guide. Also, I'm going to pass through Sapphire HD 7970, is there anything I need to do before I change the gpu from VNC to the graphics card? While typing this up, I figured I would check if the card is available. It is not showing up as an option under gpu. However, it does appear to be in the PCI devices list.
  9. Payyn
    Anyone else having issues removing torrents and removing torrents and data? I'm unable to delete any with out the application crashing. Error: The connection to the webserver has been lost! Edit: I was able to resolve this by fully deleting deluge and re-downloading it from the apps store