torch2k

I've just repeated this again. It's like on reboot, either Unraid or UD is splitting and corrupting the MBR on the ext4 drives.

I have reformatted the drives and can now recreate the issue on command: 1. Format SSD and SAS drives as EXT4 using UD 2. Create new Ubuntu VM with both drives attached (using VirtIO) -- everything works fine, vm works -- 3. Reboot Unraid server 4. Both drives corrupted and VM will not load Please see attached logs Drives are /dev/sdl1 and /dev/sdu2 I would very much like to find out if this is user error on my part, or if I have faulty hardware, or if UD is broken in some way. tower-diagnostics-20200128-1553.zip vm.xml

Trying to salvage this still. sdu2 appears to be mounted and has the entire Ubuntu drive intact. I can see the entire server filesystem. sdu1 appears to be corrupted and I believe would be the EFI parition. It won't mount (and previous to this boot, didn't show up on UD) The VM starts and immediately wants to re-installed Ubuntu. Is there any way (i know, off-topic of UD) for me to configure this to run the VM off of some other EFI parition and still access the server?

The system was running fine this morning. Updated Unraid to 6.8.2 and upon reboot this all happened. sdj was also formatted as ext4. Ran a check with UD on sdu, getting this (attached). Is it currently wiping out my drive?

It appears that my VM drive is also showing errors. I just tried an xfs_repair on it, results: root@Tower:/dev# xfs_repair -v /dev/sdu1 Phase 1 - find and verify superblock... bad primary superblock - bad magic number !!! attempting to find secondary superblock... ...Sorry, could not find valid secondary superblock Exiting now.

Thank you. I've repaired disk1, restarted the array. Here's a new set of logs. tower-diagnostics-20200128-1156.zip

are you referring to sdm as Disk1? What log file are you looking at? sorry, I'm still somewhat of a newb.

I am very concerned right now as after my VM running on a UD disk crashed and wiped out the other day, I completely rebuilt it and after the 6.8.2 upgrade it has crashed again. I'm completely at a loss. This time, I actually mounted a second 2TB SAS drive to the VM to use for backups, and it has gone "missing" according to UD. The VM is doing the same thing it did last time as well - on startup, Ubuntu wants to run a fresh install. Logs attached. Pls help?? tower-diagnostics-20200128-1100.zip

Ran on both paritions, see attached. It looks like /mnt/disks/staging will show up but it's just empty. It should be about 8GB of Ubuntu + a bunch of websites and databases, etc. Ubuntu keeps wanting to re-install now. Do I need to be looking at data recovery now? If so, any recommendations?

Sorry, should have known better. Attached. Here's what else I've found in the meantime: - Yesterday morning I added 2 new 12TB WD drives. I replaced the 2 10TB WD drives you see listed in my screenshot with the new ones. Parity is currently rebuilding. - I pulled out the SSD I am having an issue with and mounted it on macOS. macOS can't read/repair the disk, but it is labeled as "WD easystore 25FB Media" which is totally bizarre. tower-diagnostics-20200126-1057.zip

I've run into an issue where my Ubuntu Server VM is no longer mounting/loading the correct partition and I have no idea what/how it happened? Basically it's booting off of the EFI partition and wants to do a clean install. This is what I see on the Main page on Unraid (attached) Originally it was working when I had the vDisk location set to "/dev/disk/by-id/ata-SPCCSolidStateDisk_AA000000000000001810". Now that I see two paritions on the main screen, I've tried setting this to "/dev/disk/by-id/ata-SPCCSolidStateDisk_AA000000000000001810-part2", but no luck. How do I get UD to mount the correct parition?

Is it possible to access my UD share with a different user/pass combo than I would be using for my main Unraid access? See attached image for a better explanation. - I am connecting to Unraid SMB as user psmith - I have a UD named staging shared. A Ubuntu VM is installed on the UD and also has a user psmith - I can access the UD over SMB, but I only have access to the psmith home folder. This all makes senes. - Ideally, I would like to mount the UD share locally as root (or any user other than psmith, for that matter)

I just upgraded to 6.8.0 and upon reboot was not able to access the server - it was not getting an IP address assigned to it. Tried a few reboot and same issue. Then I removed my GTX760 card and things started working. Updated Unraid NVidia to 6.8.0, re-installed the card, and now having the same issue again where Unraid is not getting an IP. Am I looking for help in the right place? hah.

Hi, I'm trying to setup my first custom Docker app for unraid and for some reason, my container gives the following message even though I have it configured in Bridge mode: Failed to start remote control: start server failed: listen tcp 192.168.1.184:5572: bind: cannot assign requested address I was expecting to see something like 172.17.0.2:5572/TCP > 192.168.1.100:5572. Can someone tell me what I've got wrong here?

I'm wondering if anyone could offer some input on my configuration and help me understand what is causing my load spikes. I'd like to know if I'm just asking my server to do too much at once, or if I might have something improperly configured. Scenario: - 2 torrents downloading in deluge - A small queue in SABnzbd, which is capped to 45MB/s in config - Downloads saved to SSD cache share - A Ubunutu web server VM running, not currently being used - Server otherwise dormant Attached screenshots of top command in terminal, dashboard (specs), list of Dockers. Worth noting that serval of the cores are hitting 100% usage, just didn't capture it in my screenshot.

does this support dual pane file browsing? would love to use this for moving files around.

Thank you very much.

I was messing around trying to setup a "Public Network Bridge" and ended up last leaving the Network Settings page like this (attached). Server is now unreachable over the network, but of course can still access it via terminal at the box. Can someone please help me undo this? I believe it's due to me setting eth1 to Enable bridging > Yes, and Bridging members of br1 > eth1 TIA.

What is the proper way to run both deluge and sabnzbd over vpn? I currently have binhex-delugevpn up and running perfectly, but trying to also add binhex-sabnzbdvpn generates config errors. Are you only supposed to use one docker with VPN/privoxy enabled, and somehow point the other one at it? /usr/bin/docker: Error response from daemon: driver failed programming external connectivity on endpoint binhex-sabnzbdvpn (14648aaad0ff3ea953484e7db4f8b22e6a8cbf9eee1c1e32e2abf2dece4a9aab): Bind for 0.0.0.0:8118 failed: port is already allocated.

Hi all, just installed Unraid for the first time and I'm looking at the daunting task of migrating 20TB of data. I found this plugin right away and it looks great, thank you! I am trying to synchronize two folders, a local folder (Movies), and a remote SMB mount from my old NAS (using Unassigned Devices plugin). As the sync progresses, there are long pauses every couple of minutes it seems where Krusader becomes unresponsive, and Unraid also seems to be unresponsive (atlhough maybe not all the time that this happens?) I saw an earlier post in this thread that mentioned enabling "fast writes", but I have no idea what that meant or where to find it. Currently I am not running a parity drive, and I also do not have any cache drives setup - was going to wait until all of my transfers are completed to do those things. Any ideas on what the issue is and how I can correct it? I attached a log file from the docker. Thanks! Log for_ binhex-krusader.htm