Nano

This *Resolved* by first downgrading to 6.10.1 that Brought back interface rules but then ETH2 MAC was showing as ETH2 and ETH3 (eth3 was not an actual adapter) Removed ETH2 Card from the system and then ETH0 appeared allowing to swap ETH 1 to ETH0 as I wanted. ....... Fixed but not in a good or meaningful way.

I Have a disk that is mounted, it is assigned to a docker as a read/write slave and it keeps showing up as a drive share! Is this intended, SMB sharing is turned off on the Unassigned Drive section yet its still showing as a share. Is this part of the slave function?

This did not work, tried all kinds of bonding, unbonding, port downing 2/3, rebooting. nothing.

Do I need to do a clean install of Unraid here to fix it? If so is that a fairly easy process, other option is downgrade to 6.10.1

No drives on list/post, most important part - Motherboard is overkill, unless you need thunderbolt? You can buy a dual port 10gbe PCIe card for cheap. I have heard bad things about 12th gen Intel with unraid but look into that yourself. personal preference but the Noctua dh15 is way more set and forget compared to flashy aio CPU cooler

pontower-diagnostics-20220531-1152.zip

6.10.2

I need to change ETH0 Has it changed location? I can't see the tab at all! I have stopped and started Docker, Nothing, is it possible to adjust elsewhere, Possibly on USB or Shell

Please delete if this is possible now In the two years I have used Unraid, my server has failed twice due to USB and caused multiple days of downtime ect as i try to work around the buggy USB. Please let us install the OS to an actual good peice of hardware such as a NVME or SSD. Is this possible? I have heard you can install in VMWare, is a virtual USB used in this instance.

Latest Windows 10 ISO is not working with the drivers, I have extensively tested it with every mount method. Working with older version, 1809 ISO confirmed working. Not sure if this needs to go into 6.9 bug reports?

Neither of my 2 dockers can connect to another docker anymore on my network, they are on the same docker network, is there a way to do a ping test within the docker, I guess the only other option is to rollback and test.

They could be, They dont finish off until i go to the docker page itself. I have no idea of why simply clicking the docker tab finishes off the rebuild process. This has to be a bug.

Ah true, If i have 1 parity drive and only 1 array drive fails it will rebuild. What would you do, extra parity or extra Data drive.

Hey, I actually got Authelia working with a much simplier guide, it did not require any other dockers, If you turn on SQ lite in authelia it can all be done within the docker itself. Much much easier for people to follow. storage local path configdb.sqlite3 I'm sure your much smarter than me and can tell me why this is not as good as your guide but who knows.

Hi All, If i currently have 4TB Parity + 4TB Array +4TB Array 8TB Total If i have an additional 4TB Drive, what are negatives of adding to the array vs the duel Parity. If i add it to Parity i only have 8TB Usable space right? If i add it to the array i have 12TB. but if more than one disk fails i lose the whole array correct? Aslong as i have a backup, what would you guys do?

So the port is not being used, if i put it in host mode i can reach the Login Page, i am trying to use it with Letsencrypt. If i put in the password which i encrypted it does not say wrong password but simply refreshes the page. Is there anyway you can share your Config file filled out so i can compare.

I tried to start from scratch, The Docker will not start unless i select host as network option. Console shows level=fatal msg="listen tcp4 10.139.44.22:9091: bind: cannot assign requested address"

Everytime i log in, i get redirected back to login, What am i doing wrong in the configuration file, I can get to the main Http login, Docker is running. Password does not error, I tried to remove the redirection in the config file but still does not log in.

Nothing appears in app data but its under docker containers, Cant even get past step 1

Hi, Windows Sandbox wont enable in KVM. I have got all the features of Hyper to isntall but it rely's on sandbox to run. Here is a picture of error within windows (KVM)

2020-06-05 10:05:04,837 DEBG 'start-script' stdout output: [debug] Having issues resolving name 'www.google.com', sleeping before retry... 2020-06-05 10:05:04,986 DEBG 'start-script' stdout output: [debug] Having issues resolving name 'www.google.com', sleeping before retry... 2020-06-05 10:05:06,510 DEBG 'start-script' stdout output: [debug] Having issues resolving name 'www.google.com', sleeping before retry... 2020-06-05 10:05:06,510 DEBG 'start-script' stdout output: [debug] Having issues resolving name 'www.google.com', sleeping before retry... 2020-06-05 10:05:09,892 DEBG 'start-script' stdout output: Fri Jun 5 10:05:09 2020 Bad compression stub decompression header byte: 42 Getting this on latest version, Broken

Self hosted remote support would be amazing. https://www.connectwise.com/software/control/download https://hub.docker.com/r/kenayagi/screenconnect/

You were right, Latest version in the comments, someone updated it themselves. https://github.com/omaralvarez/deluge-autoremoveplus/files/3312651/AutoRemovePlus-0.6.2-py3.7.zip

Hi, i cannot get a .egg file to work, even if i put it in plugins manually, trying to get the autoremovetorrent plugin to work, any ideas??