blaine07

Apparently its NOT booting now; so slow can't get into it apparently. Almost appears something with audio, going to remove that pass through and see if circumstances change??

Heres DIAGS tower-diagnostics-20190221-1817.zip

APOLOGIES! Alright, so I LIED, a little. It DOES boot up. Just SOOOOO SLOW that it's nearly un useable. It IS identifying GT730 in Abou this Mac. Trying to let it boot again and will pull ZIP. Here is XML(With OSK Redacted facepalm): <?xml version='1.0' encoding='UTF-8'?> <domain type='kvm' id='5' xmlns:qemu='http://libvirt.org/schemas/domain/qemu/1.0'> <name>Mojave</name> <uuid>f4833360-16d8-c14b-8759-4715079a97a5</uuid> <description>OSX Mojave VM</description> <metadata> <vmtemplate xmlns="unraid" name="Linux" icon="linux.png" os="linux"/> </metadata> <memory unit='KiB'>8388608</memory> <currentMemory unit='KiB'>8388608</currentMemory> <memoryBacking> <nosharepages/> </memoryBacking> <vcpu placement='static'>4</vcpu> <cputune> <vcpupin vcpu='0' cpuset='1'/> <vcpupin vcpu='1' cpuset='5'/> <vcpupin vcpu='2' cpuset='3'/> <vcpupin vcpu='3' cpuset='7'/> </cputune> <resource> <partition>/machine</partition> </resource> <os> <type arch='x86_64' machine='pc-q35-3.0'>hvm</type> <loader readonly='yes' type='pflash'>/usr/share/qemu/ovmf-x64/OVMF_CODE-pure-efi.fd</loader> <nvram>/etc/libvirt/qemu/nvram/f4833360-16d8-c14b-8759-4715079a97a5_VARS-pure-efi.fd</nvram> </os> <features> <acpi/> <apic/> </features> <cpu mode='host-passthrough' check='none'> <topology sockets='1' cores='2' threads='2'/> </cpu> <clock offset='utc'> <timer name='rtc' tickpolicy='catchup'/> <timer name='pit' tickpolicy='delay'/> <timer name='hpet' present='no'/> </clock> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/local/sbin/qemu</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw' cache='writeback'/> <source file='/mnt/disk2/domains/Mojave/vdisk3.img'/> <backingStore/> <target dev='hdc' bus='sata'/> <boot order='1'/> <alias name='sata0-0-2'/> <address type='drive' controller='0' bus='0' target='0' unit='2'/> </disk> <controller type='usb' index='0' model='ich9-ehci1'> <alias name='usb'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x7'/> </controller> <controller type='usb' index='0' model='ich9-uhci1'> <alias name='usb'/> <master startport='0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0' multifunction='on'/> </controller> <controller type='usb' index='0' model='ich9-uhci2'> <alias name='usb'/> <master startport='2'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x1'/> </controller> <controller type='usb' index='0' model='ich9-uhci3'> <alias name='usb'/> <master startport='4'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x2'/> </controller> <controller type='sata' index='0'> <alias name='ide'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x1f' function='0x2'/> </controller> <controller type='pci' index='0' model='pcie-root'> <alias name='pcie.0'/> </controller> <controller type='pci' index='1' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='1' port='0x10'/> <alias name='pci.1'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0' multifunction='on'/> </controller> <controller type='pci' index='2' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='2' port='0x11'/> <alias name='pci.2'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x1'/> </controller> <controller type='pci' index='3' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='3' port='0x12'/> <alias name='pci.3'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x2'/> </controller> <controller type='pci' index='4' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='4' port='0x13'/> <alias name='pci.4'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x3'/> </controller> <controller type='virtio-serial' index='0'> <alias name='virtio-serial0'/> <address type='pci' domain='0x0000' bus='0x02' slot='0x00' function='0x0'/> </controller> <interface type='bridge'> <mac address='52:54:00:04:3a:e3'/> <source bridge='br0'/> <target dev='vnet1'/> <model type='vmxnet3'/> <alias name='net0'/> <address type='pci' domain='0x0000' bus='0x01' slot='0x00' function='0x0'/> </interface> <serial type='pty'> <source path='/dev/pts/1'/> <target type='isa-serial' port='0'> <model name='isa-serial'/> </target> <alias name='serial0'/> </serial> <console type='pty' tty='/dev/pts/1'> <source path='/dev/pts/1'/> <target type='serial' port='0'/> <alias name='serial0'/> </console> <channel type='unix'> <source mode='bind' path='/var/lib/libvirt/qemu/channel/target/domain-5-Mojave/org.qemu.guest_agent.0'/> <target type='virtio' name='org.qemu.guest_agent.0' state='disconnected'/> <alias name='channel0'/> <address type='virtio-serial' controller='0' bus='0' port='1'/> </channel> <input type='tablet' bus='usb'> <alias name='input0'/> <address type='usb' bus='0' port='1'/> </input> <input type='mouse' bus='ps2'> <alias name='input1'/> </input> <input type='keyboard' bus='ps2'> <alias name='input2'/> </input> <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x06' slot='0x00' function='0x0'/> </source> <alias name='hostdev0'/> <address type='pci' domain='0x0000' bus='0x03' slot='0x00' function='0x0'/> </hostdev> <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x06' slot='0x00' function='0x1'/> </source> <alias name='hostdev1'/> <address type='pci' domain='0x0000' bus='0x04' slot='0x00' function='0x0'/> </hostdev> <memballoon model='none'/> </devices> <seclabel type='dynamic' model='dac' relabel='yes'> <label>+0:+100</label> <imagelabel>+0:+100</imagelabel> </seclabel> <qemu:commandline> <qemu:arg value='-usb'/> <qemu:arg value='-device'/> <qemu:arg value='usb-mouse,bus=usb-bus.0'/> <qemu:arg value='-device'/> <qemu:arg value='usb-kbd,bus=usb-bus.0'/> <qemu:arg value='-device'/> <qemu:arg value='isa-applesmc,osk=XXXXXX'/> <qemu:arg value='-smbios'/> <qemu:arg value='type=2'/> <qemu:arg value='-cpu'/> <qemu:arg value='Penryn,vendor=GenuineIntel,kvm=on,+invtsc,+avx,+avx2,+aes,+xsave,+xsaveopt,+ssse3,+sse4_2,+popcnt,vmware-cpuid-freq=on,'/> </qemu:commandline> </domain>

Alright, good news is got card installed and got Unraid booting with IGD. Trying to boot Mojave I get following error now, after adding the 730 video and sound, then adding CPU and Network card stuff back in: *****REDACTED APOLOGIES*****

(Just picked a random post to quote to get your attention) Today my GT 730 Video Card came. Before I get it put in, is their anything I need to know or specifically do? Power down Unraid box, boot to bios and make sure iGPU is "primary" if I am given any choices for such and let it boot up; while keeping VGA still hooked to iGPU? Then at that point "pass through" the GT730 to my Mojave; making sure to backup XML before hand in case something goes wrong? That sound right or is their anything else you can think of I need to take into consideration and do before I install card? Do before I pass through? Anything? Thanks a ton!

Thanks for the help mate!

Finally, somehow, figured it out. Must’ve been that 1,253,397th attempt lol

Would be greatly appreciated!

I couldn’t find anything working thus far; trying to find a WORKING CONF for Bitwarden. Been having a heck of a time. I tried using Sonar and changing to “bitwarden” and changing all the ports but no dice. My domain is bw.Xxxxxx.net, and my Unraid is on 192.169.1.5 and using a “proxynet” as in space invaders videos. Could anyone be as kind to help me figure out a working CONF?

66% chance of NOT hitting unraid port LOL. I’ll have to find SpaceInvaders video on identifying ports LOL. I KNOW my luck; if it’s not bad luck it’s not my luck AND it’s never in my favor [emoji848][emoji23]

Looks like 3. I’m guessing Front3.0/Back 3.0/Back 2.0 [emoji848]

Thanks for the plethora of advice mate!! Is their is way to easily tell how many USB controllers I have? Hopefully the 730 shows up mid next week.

Saw your edit, both will primarily be VMs for remote use. Don’t plan on using either locally much. Regardless after I get graphics figured out the USB pass through was next on my list. Hoping I can give a couple ports to each VM, somehow.

Has a Xeon 3.5ghz quad core and 32gb of ram; should do fine; I think. Even with both VMS running now resources aren’t maxed or anything crazy. Yeah, I’ll just continue to run Unraid and Win10 off IGPU and Mojave off GT730. We’ll see what happens. Found a refurb GT730 on amazon for $39 so if it doesn’t work no big loss, will just pass it through for Win10 and give up on Mojave [emoji848][emoji2373]

Alright! So Windows10 and OSX just BOTH can’t be booted at same time on Unraid? Win10 seems to be “fine” with IGPU though; I will probably just switch Mojoave to new GPU. I may not hook monitor to new GPU for Mojave; just need graphics to be “better than 4mb” and not tear and be all jacked up through VNC. Thanks a ton, as usual mate!

Sorry to quite you AGAIN but couple more questions for clarifications... When new card shows up I’ll power server down and install. When powering back up will video cable stay how it is(on IGPU) or will it now connect to 730? Will 730 ONLY be used for OSX VM or will entire Unraid box use it? For better or worse I usually like to keep Unraid box booted up to GUI. Will My Win10VM share the new card? Any steps or information would be excellent. Mainly just not clear if once I install it the whole system will use it or remain on IGPU and only stuff passed through will use new card and if new card can be simultaneously passed through new 730 concurrently. Thanks a ton!

I caved; GT730 from Amazon will be here sometime next week. [emoji1305][emoji1696]

I’m a idiot; sorry [emoji2361] Virt-Manager is what I was looking at mate; sorry

Idea of this interest me however not seeing "new" version in Unraid Applications. Perhaps theirs a install guide/info somewhere and I am missing it? Idea of this intrigues me :-) Thanks! Blaine

Sorry; read back and we’d covered that; just got excited thought BestBuy had a 710 in stock; they don’t. They do have some of the XFX AMD cards but apparently only a certain RX580 Pulse works on those. [emoji2361]

Would this work easily? https://www.bestbuy.com/site/xfx-amd-radeon-r5-220-core-edition-2gb-gddr3-pci-express-2-1-graphics-card-silver/5315600.p?skuId=5315600

So one last Q... will a 710 work in Mojave at moment? Staples may have some in stock and... yeah really want to try this mess. If 710 will work what’s required to make it operational?

Well as it is now I don’t even know if passthru is working for me; as in it shows I only have 4mb of video memory and even on VNC lots of screen artifacts and tearing and nearly un useable Crap crap crap

What about this for a Majave VM: EVGA GeForce GTX 1050 Ti SC Gaming, 4GB GDDR5, DX12 OSD Support (PXOC) Graphics Card 04G-P4-6253-KR https://www.amazon.com/dp/B01MF7EQJZ/ref=cm_sw_r_cp_api_i_tzZzCbYYG0Y2G Someone has one I may be able to borrow... [emoji848] Would it be a nightmare to configure with IDs and KEXT and etc that id never be able to figure out mate? 1812: thank you SO much for your continued efforts to get me straight here, it’s truly very gratefully appreciated mate!!!

710 will work in meantime? I mean guess if nothing else it would still work in my Win10 VM anyways [emoji848][emoji2373]