GoChris

I have a share with split level 2, its goes something like this Share -720 blah1 -1080 blah2 -DVDs blah3 There are many many gigs of video files. I want to combine the 720 and 1080 folders into one called "HD". I think I need to change the split level (hmm now I'm confused), but how do I go about combining them? Just rename 720 to HD and then disk by disk move the ones from 1080? The dvds will be backups meaning video_ts folders. So I need a split level of....1, or 2 still? I think 2 still cause I'm not changing the folder depth.

Hmmm. I'm running 4.5-beta3 and cannot get this to work. I enabled user security and created a user. I get the following error: "The network share could not be accessed for the following reason: Cannot create a file when that file already exists (0x800700B7). Please ensure that the network location is valid." I'm tying to backup to \\tower\Backups Any ideas what I might be doing wrong, or what I need to do to get this to work?

I can't buy any of this good stuff in Canada Newegg will ship me the norco 420 case....for $100, lame.

I've been looking around a bunch for some cheaper 5-in-3s, but have come to the conclusion I will just get a norco case.

+1 Very interested! +2

I've noticed that drives I pull from my Drobo have SMART turned off. Silly me I keep forgetting to turn it on before running this, so usually I turn it on then run it again. Could you update your script to make sure SMART is turned on before it starts? Otherwise, working great and love that it says so much downtime adding drives to the array.

Do we know if this Norco unit is fully supported by unRaid?

That's pretty nifty, so nifty I might have to consider that and combine it with a 4 drive external enclosure I have, 9 drives should be enough. This is also a nice looking unit, however it would be more than $300 to get operational. http://www.ncix.com/products/index.php?sku=33078&vpn=ES34069-BK-120&manufacture=CHENBRO

didn't want to start another thread, but this is unrelated. I tried the pre_clear script on a 500gb I was going to add, what does this tell me? ============================================================================ == == Disk /dev/sdb has been successfully precleared == ============================================================================ S.M.A.R.T. error count differences detected after pre-clear note, some 'raw' values may change, but not be an indication of a problem 50c50 < 1 Raw_Read_Error_Rate 0x000f 118 089 006 Pre-fail Always - 186204900 --- > 1 Raw_Read_Error_Rate 0x000f 118 089 006 Pre-fail Always - 0 54c54 < 7 Seek_Error_Rate 0x000f 064 054 030 Pre-fail Always - 283637411448 --- > 7 Seek_Error_Rate 0x000f 064 054 030 Pre-fail Always - 283639711502 59,60c59,60 < 190 Airflow_Temperature_Cel 0x0022 070 053 045 Old_age Always - 30 (Lifetime Min/Max 21/30) < 195 Hardware_ECC_Recovered 0x001a 072 054 000 Old_age Always --- > 190 Airflow_Temperature_Cel 0x0022 068 053 045 Old_age Always - 32 (Lifetime Min/Max 21/34) > 195 Hardware_ECC_Recovered 0x001a 070 054 000 Old_age Always ============================================================================ here is the the rest for that drive # smartctl -a /dev/sdb smartctl version 5.38 [i486-slackware-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.10 family Device Model: ST3500630AS Serial Number: 6QG0VL1N Firmware Version: 3.AAK User Capacity: 500,107,862,016 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 7 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Wed Mar 11 16:52:55 2009 GMT+8 SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 163) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 111 089 006 Pre-fail Always - 193125213 3 Spin_Up_Time 0x0003 096 093 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 691 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 6 7 Seek_Error_Rate 0x000f 064 054 030 Pre-fail Always - 283639855424 9 Power_On_Hours 0x0032 092 092 000 Old_age Always - 7201 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 214 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 070 053 045 Old_age Always - 30 (Lifetime Min/Max 21/34) 194 Temperature_Celsius 0x0022 030 047 000 Old_age Always - 30 (0 18 0 0) 195 Hardware_ECC_Recovered 0x001a 062 054 000 Old_age Always - 201774066 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.

The parity check wasn't needed each time. Just the other day (yesterday, sunday..don't remember) since the system hung from the clicking drive. I started the check manually last night because I had manually stopped the one it was doing as a result of the hard shutdown in order to replace the sata cable and subsequently changed the power splitter. I am stopping the array via the gui and using the power down button when turning it off. But thanks for the heads up.

Also right before I left for work, I noticed the front case fans weren't working (no leds). I opened the case, touched the connector, and voila they turned on. So obviously the connection on that splitter wasn't very good, which was the old one used for 2 drives. Should have known better to use that in the first place. Thanks for the help guys.

Well it's morning, no clicking, parity check done, and no errors. Parity disk, looks like the bad sector count is still just one. right? SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 117 099 006 Pre-fail Always - 148466845 3 Spin_Up_Time 0x0003 099 094 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 185 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 1 7 Seek_Error_Rate 0x000f 066 060 030 Pre-fail Always - 3912674 9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 1249 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 274 184 Unknown_Attribute 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 076 076 000 Old_age Always - 24 188 Unknown_Attribute 0x0032 100 098 000 Old_age Always - 3 189 High_Fly_Writes 0x003a 048 048 000 Old_age Always - 52 190 Airflow_Temperature_Cel 0x0022 079 052 045 Old_age Always - 21 (Lifetime Min/Max 21/34) 194 Temperature_Celsius 0x0022 021 048 000 Old_age Always - 21 (0 16 0 0) 195 Hardware_ECC_Recovered 0x001a 056 030 000 Old_age Always - 148466845 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 96344706384813 241 Unknown_Attribute 0x0000 100 253 000 Old_age Offline - 881728175 242 Unknown_Attribute 0x0000 100 253 000 Old_age Offline - 60491478

Alright, found a brand new, sealed, unused cable. I will power down, replace and start up again. It's just before bedtime so the parity check should be done by morning. Thanks, I'll report back after.

I am connecting right to the motherboard. I will replace a cable with another one, hopefully I can find a previously unused cable and this week I will buy some new ones. Can I stop the parity check, replace the cable, and will it start where it left off? Or should I let it finish first?

Thanks for the lesson, that was some information I didn't know. Red circle...bad heh Updated info ata-ST31500341AS_9VS082L1 30°C 1,465,138,552 - 1,669,676 69 169 === START OF INFORMATION SECTION === Device Model: ST31500341AS Serial Number: 9VS082L1 Firmware Version: CC1H User Capacity: 1,500,301,910,016 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 4 Local Time is: Mon Mar 9 20:49:08 2009 GMT+8 SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 609) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 255) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x103f) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 119 099 006 Pre-fail Always - 213748855 3 Spin_Up_Time 0x0003 100 094 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 183 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 1 7 Seek_Error_Rate 0x000f 066 060 030 Pre-fail Always - 3908619 9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 1239 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 273 184 Unknown_Attribute 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 076 076 000 Old_age Always - 24 188 Unknown_Attribute 0x0032 100 098 000 Old_age Always - 3 189 High_Fly_Writes 0x003a 048 048 000 Old_age Always - 52 190 Airflow_Temperature_Cel 0x0022 070 052 045 Old_age Always - 30 (Lifetime Min/Max 28/33) 194 Temperature_Celsius 0x0022 030 048 000 Old_age Always - 30 (0 16 0 0) 195 Hardware_ECC_Recovered 0x001a 055 030 000 Old_age Always - 213748855 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 142597209195431 241 Unknown_Attribute 0x0000 100 253 000 Old_age Offline - 881727511 242 Unknown_Attribute 0x0000 100 253 000 Old_age Offline - 1125710762 SMART Error Log Version: 1 ATA Error Count: 24 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 24 occurred at disk power-on lifetime: 1238 hours (51 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 00 ff ff ff ef 00 01:17:15.838 READ DMA EXT 27 00 00 00 00 00 e0 00 01:17:15.776 READ NATIVE MAX ADDRESS EXT ec 00 00 00 00 00 a0 02 01:17:15.736 IDENTIFY DEVICE ef 03 46 00 00 00 a0 02 01:17:15.718 SET FEATURES [set transfer mode] 27 00 00 00 00 00 e0 00 01:17:15.596 READ NATIVE MAX ADDRESS EXT Error 23 occurred at disk power-on lifetime: 1238 hours (51 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 00 ff ff ff ef 00 01:17:12.863 READ DMA EXT 27 00 00 00 00 00 e0 00 01:17:12.801 READ NATIVE MAX ADDRESS EXT ec 00 00 00 00 00 a0 02 01:17:12.781 IDENTIFY DEVICE ef 03 46 00 00 00 a0 02 01:17:12.762 SET FEATURES [set transfer mode] 27 00 00 00 00 00 e0 00 01:17:12.711 READ NATIVE MAX ADDRESS EXT Error 22 occurred at disk power-on lifetime: 1238 hours (51 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 00 ff ff ff ef 00 01:17:09.878 READ DMA EXT 27 00 00 00 00 00 e0 00 01:17:09.816 READ NATIVE MAX ADDRESS EXT ec 00 00 00 00 00 a0 02 01:17:09.776 IDENTIFY DEVICE ef 03 46 00 00 00 a0 02 01:17:09.761 SET FEATURES [set transfer mode] 27 00 00 00 00 00 e0 00 01:17:09.646 READ NATIVE MAX ADDRESS EXT Error 21 occurred at disk power-on lifetime: 1238 hours (51 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 00 ff ff ff ef 00 01:17:06.883 READ DMA EXT 27 00 00 00 00 00 e0 00 01:17:06.821 READ NATIVE MAX ADDRESS EXT ec 00 00 00 00 00 a0 02 01:17:06.801 IDENTIFY DEVICE ef 03 46 00 00 00 a0 02 01:17:06.782 SET FEATURES [set transfer mode] 27 00 00 00 00 00 e0 00 01:17:06.731 READ NATIVE MAX ADDRESS EXT Error 20 occurred at disk power-on lifetime: 1238 hours (51 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 00 ff ff ff ef 00 01:17:03.868 READ DMA EXT 27 00 00 00 00 00 e0 00 01:17:03.786 READ NATIVE MAX ADDRESS EXT ec 00 00 00 00 00 a0 02 01:17:03.705 IDENTIFY DEVICE ef 03 46 00 00 00 a0 02 01:17:03.673 SET FEATURES [set transfer mode] 27 00 00 00 00 00 e0 00 01:17:03.645 READ NATIVE MAX ADDRESS EXT SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.

You were trying to find out which of the installed drives is clicking, right? Any drive that is running in the computer could be the clicker, and that has nothing to do with the array. Or perhaps I misunderstood you? You really should try to get a SMART report for each of the other 2 drives. I believe you can also use UnMENU to get SMART reports for the other 2 drives, that are not in the array (sda and sdb). Both are older drives, and therefore more likely to be clicking. I was pretty sure the clicking happened once last week, before the other 2 drives where added. I would post the info on them right now however I do not see how I can get it via UnMenu since they are not part of the array. The array/system becomes quite unresponsive, and actually hung earlier due to the clicking, so I assumed it was a member drive. This could be a wrong assumption.

Alright, change one connection that fed the power to the 1.5 and (i think) the 500, was getting power off a fan molex, but now its from a direct rail, into a 2 sata power cable. anyway, its up and running, just for 2 minutes so far. version: 4.5-beta2 Total size: 1,465,138,552 KB Current position: 10,629,892 (0.7%) Estimated speed: 61,641 KB/sec Estimated finish: 393.2 minutes Sync errors: 128 edit: hmm, few write errors. prob should rma this drive? which is easy as I have instant replacement so I can just go to the store and over the counter exchange it. Model / Serial No. Temperature Size Free Reads Writes Errors parity ata-ST31500341AS_9VS082L1 33°C 1,465,138,552 - 209,697 51 67

the other 2 drives are not part of the array yet so that's why I didn't post them. 1 I was going to add but this problem arose, the 2nd will be my cache drive. I am not sure where to get older versions, so I will try the beta release and see how that goes. I will check the bios, but I don't think this one does AHCI, I have the option for enhanced or combined, or..something for sata options. I'll probably have to hard power down now, console says "Kernel Panic - not syncing: Out of memory and no killable processes" Edit: I see now there are some old versions for download, I will just try the 4.5 now.

Got the syslog

Using "Smart Statistics" on the Disk Mgmt screen. === START OF INFORMATION SECTION === Device Model: ST31500341AS Serial Number: 9VS082L1 Firmware Version: CC1H User Capacity: 1,500,301,910,016 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 4 Local Time is: Mon Mar 9 16:00:06 2009 GMT+8 SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 609) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 255) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x103f) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 115 099 006 Pre-fail Always - 96054377 3 Spin_Up_Time 0x0003 100 094 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 97 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 1 7 Seek_Error_Rate 0x000f 066 060 030 Pre-fail Always - 3906201 9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 1236 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 184 184 Unknown_Attribute 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Unknown_Attribute 0x0032 100 098 000 Old_age Always - 3 189 High_Fly_Writes 0x003a 048 048 000 Old_age Always - 52 190 Airflow_Temperature_Cel 0x0022 076 052 045 Old_age Always - 24 (Lifetime Min/Max 23/24) 194 Temperature_Celsius 0x0022 024 048 000 Old_age Always - 24 (0 16 0 0) 195 Hardware_ECC_Recovered 0x001a 052 030 000 Old_age Always - 96054377 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 191074505065381 241 Unknown_Attribute 0x0000 100 253 000 Old_age Offline - 881705840 242 Unknown_Attribute 0x0000 100 253 000 Old_age Offline - 384087824 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.11 Device Model: ST3750330AS Serial Number: 5QK01SEZ Firmware Version: AD14 User Capacity: 750,156,374,016 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 4 Local Time is: Mon Mar 9 16:05:23 2009 GMT+8 SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 25) The self-test routine was aborted by the host. Total time to complete Offline data collection: ( 634) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 171) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x103b) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 119 100 006 Pre-fail Always - 209788967 3 Spin_Up_Time 0x0003 094 091 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 63 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 067 060 030 Pre-fail Always - 4300497694 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 256 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 1 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 51 184 Unknown_Attribute 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Unknown_Attribute 0x0032 100 099 000 Old_age Always - 8590065667 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 075 059 045 Old_age Always - 25 (Lifetime Min/Max 20/25) 194 Temperature_Celsius 0x0022 025 042 000 Old_age Always - 25 (0 20 0 0) 195 Hardware_ECC_Recovered 0x001a 047 036 000 Old_age Always - 209788967 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.10 family Device Model: ST3500630AS Serial Number: 9QG2V7BY Firmware Version: 3.AAE User Capacity: 500,107,862,016 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 7 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Mon Mar 9 16:08:26 2009 GMT+8 SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 163) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 117 089 006 Pre-fail Always - 149624972 3 Spin_Up_Time 0x0003 098 093 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 691 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 084 060 030 Pre-fail Always - 247955503 9 Power_On_Hours 0x0032 092 092 000 Old_age Always - 7087 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 311 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 071 049 045 Old_age Always - 29 (Lifetime Min/Max 29/29) 194 Temperature_Celsius 0x0022 029 051 000 Old_age Always - 29 (0 16 0 0) 195 Hardware_ECC_Recovered 0x001a 097 055 000 Old_age Always - 233684308 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): === START OF INFORMATION SECTION === Device Model: ST31500341AS Serial Number: 9VS0ZZLS Firmware Version: CC1H User Capacity: 1,500,301,910,016 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 4 Local Time is: Mon Mar 9 16:12:31 2009 GMT+8 SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 617) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 255) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x103f) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 111 100 006 Pre-fail Always - 32170619 3 Spin_Up_Time 0x0003 096 096 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 10 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 19 7 Seek_Error_Rate 0x000f 063 060 030 Pre-fail Always - 1925693 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 34 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 7 184 Unknown_Attribute 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 189 High_Fly_Writes 0x003a 055 055 000 Old_age Always - 45 190 Airflow_Temperature_Cel 0x0022 072 068 045 Old_age Always - 28 (Lifetime Min/Max 20/28) 194 Temperature_Celsius 0x0022 028 040 000 Old_age Always - 28 (0 20 0 0) 195 Hardware_ECC_Recovered 0x001a 045 045 000 Old_age Always - 32170619 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 266893562740765 241 Unknown_Attribute 0x0000 100 253 000 Old_age Offline - 110247548 242 Unknown_Attribute 0x0000 100 253 000 Old_age Offline - 181214449 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): (4th drive is the one I just added). I'm not really sure yet how to decipher the smart values. It's clicking once every 10-20 seconds pretty much since I turned it on a few minutes ago. On another note, my parity check is going crap slow, before it was 60+MB/s, all 4 array drives are on the mobo. I was going to get the syslog but...now I don't get a connection to the web server.

thanks, I will do both of those suggestions as soon as I get home tonight. I installed unMenu so that will make the syslog part super easy (unmenu rocks btw), and wow, super fast replies guys, thanks.

Hi all, I'm new to unraid, so far I like it, and everything is working pretty good. I have a problem with a drive, I have 4 drives as part of my raid, but this problem existed last week and I only had 3 on the free version. I have a drive that sounds like it's trying to power up, I'm not sure I would say it's the same sound as a dead drive. If I power down the system, and turn it back on, it's fine. I ran the computer at least all day yesterday, started a transfer last night (still trying to migrate data), when I got up this morning, the transfer was not done by the looks of it (but the transfer dialog was gone). I "stopped" the array, but that never really finished so I just powered it down. I suspect when I get home tonight and power it on, it will be fine, probably for many many hours until it happens again. So, long story short (too late?), how do I tell which drive it is? Would I be able to determine from the SMART stats at all? I suspect it's my 1.5TB parity drive or a refurb 750gb. (The other drive I had in there before is a 500gb, I also added another 1.5TB this weekend). I just want to know asap before I move more data overl. If it's the 1.5tb I have enough free space I can use the new 1.5 as the parity I think, or if it's the 750 I just put a 500gb in the case which I haven't added to the array yet. (since the drive isn't dead is there a wiki on how to "ghost" the drive so it doesn't have to rebuild?) Thanks in advance for the help. I know there is huge community support, part of the reason I went with unRaid so I'm not worried.