GoChris

Is there a tag for Red discord bot prior to the 3.5 update? That update is a breaking change for some cogs so would like to go back to a working version.

Been having at least a week of this now I think, but every morning between 4 and 5am the server becomes unresponsive. Almost every time I can't ssh to it at all, and I have to hard reset. This morning I was able to SSH into it, the web ui only loaded the banner the first time I tried, but nothing after any subsequent tries. There was not much ram available, maybe ~600MB according to top. I did try to stop dockers, and most did, but they weren't using much ram according to docker status. Plex was using ~12GB which would not stop when using docker stop. The system has 64GB of ram. One time last week when I was able to ssh into it (about the only other time I could), top was showing kswapd using 100% cpu. On that day reboot never worked. Today /sbin/reboot did eventually reboot, however it was still considered an unclean shutdown. Before today I did increase some shutdown timeouts to ~5minutes. I did manage to get the diagnostics via ssh today before it rebooted, and I have attached. I would appreciate any insight. One last thing, I did upgrade to 6.11.5 last week and I think that was when I started having these problems so I downgraded, and still have the problems. I could be mistaken that the problems occurred before I upgraded. tower-diagnostics-20230227-0720.zip

I'm also having a problem with the disk background color, it remains white when using the "black" theme no matter what I change the background colors too. I have tried it in firefox and chrome. What info can I provide to help troubleshoot? The information tab list also has a white background, making all the text basically unreadable.

I long time ago I did, read a few posts up. I don't use this anymore though.

Please I would like a min free space setting for the array, and a min free space setting for cache pools. I actually don't care about a setting for the cache pool that much, but I do NOT want the array min free space to also apply to the cache pools (it defeats the purpose of them in some scenarios).

Sorry I stopped using this a while ago.

It rebooted, thanks! I was a bit impatient last night as I need access to plex.

Although this time it didn't boot back up properly either after removing the UD plg file. I've now removed all plugin plg files and it has booted back up (no plugins). This is where it got to, if that helps.

No go, reboot fails still after installing the plugin.

Thanks! I will try it.

tower-diagnostics-20221104-1858.zip This is after the last reboot for which I didn't add the plugin back. I was using UD for 2 external usb drives, and a few remote mappings to an offsite unraid box and the ip/route is via the tailscale docker.

I did. That's how I eventually figured out what plugin was causing it. I removed all of them, booted up in regular mode, added a few plugins one at a time with reboots in between. After adding UD it will not boot fully. I hooked up a monitor and the last thing was on screen was something about starting samba, that was it.

I am on 6.11.1 and with the Unassigned Devices plugin installed, my unraid box will not reboot fully. It hangs. What can I do or provide to try and figure out why?

I did a scan at 25% intervals using the Disk Speed container. The slowest 4TB drive does indeed slow to ~80MB/s at the 4TB mark. As well as one 8TB that slows to ~88MB/s at it's end. So perhaps the slow performance of those at their edges are what's dropping the average down so much.

Alright in the first 5 minutes, it was between ~162 to 172MB/s, seemed pretty stable once it got going in the high 160s. I know drives slow down on the outer edges, so perhaps some of the older 4TB drives are quite slow? I will do some speed tests on all of them at different positions to see if anyone individually is slow. Average still seems low compared to the starting speed. I thought most dockers were stopped during the last rebuild, but I can't be certain now.

That was the avg speed from the history, so it would be faster at one point. I will do a test and report back after stopping any activity.

09:00.0 Serial Attached SCSI controller: Broadcom / LSI SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon] (rev 03) Subsystem: Broadcom / LSI SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 81 IOMMU group: 17 Region 0: I/O ports at e000 [size=256] Region 1: Memory at d04c0000 (64-bit, non-prefetchable) [size=16K] Region 3: Memory at d0080000 (64-bit, non-prefetchable) [size=256K] Expansion ROM at d0000000 [disabled] [size=512K] Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [68] Express (v2) Endpoint, MSI 00 DevCap: MaxPayload 4096 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ SlotPowerLimit 0.000W DevCtl: CorrErr+ NonFatalErr+ FatalErr+ UnsupReq+ RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+ FLReset- MaxPayload 512 bytes, MaxReadReq 512 bytes DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 5GT/s, Width x8, ASPM L0s, Exit Latency L0s <64ns ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp- LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 5GT/s (ok), Width x8 (ok) TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Range BC, TimeoutDis+ NROPrPrP- LTR- 10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix- EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit- FRS- TPHComp- ExtTPHComp- AtomicOpsCap: 32bit- 64bit- 128bitCAS- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- OBFF Disabled, AtomicOpsCtl: ReqEn- LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- EqualizationPhase1- EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest- Retimer- 2Retimers- CrosslinkRes: unsupported Capabilities: [d0] Vital Product Data pcilib: sysfs_read_vpd: read failed: No such device Not readable Capabilities: [a8] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [c0] MSI-X: Enable+ Count=15 Masked- Vector table: BAR=1 offset=00002000 PBA: BAR=1 offset=00003800 Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ AERCap: First Error Pointer: 00, ECRCGenCap+ ECRCGenEn- ECRCChkCap+ ECRCChkEn- MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap- HeaderLog: 00000000 00000000 00000000 00000000 Capabilities: [138 v1] Power Budgeting <?> Capabilities: [150 v1] Single Root I/O Virtualization (SR-IOV) IOVCap: Migration-, Interrupt Message Number: 000 IOVCtl: Enable- Migration- Interrupt- MSE- ARIHierarchy- IOVSta: Migration- Initial VFs: 16, Total VFs: 16, Number of VFs: 0, Function Dependency Link: 00 VF offset: 1, stride: 1, Device ID: 0072 Supported Page Size: 00000553, System Page Size: 00000001 Region 0: Memory at 00000000d04c4000 (64-bit, non-prefetchable) Region 2: Memory at 00000000d00c0000 (64-bit, non-prefetchable) VF Migration: offset: 00000000, BIR: 0 Capabilities: [190 v1] Alternative Routing-ID Interpretation (ARI) ARICap: MFVC- ACS-, Next Function: 0 ARICtl: MFVC- ACS-, Function Group: 0 Kernel driver in use: mpt3sas Kernel modules: mpt3sas 0a:00.0 Serial Attached SCSI controller: Broadcom / LSI SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon] (rev 03) Subsystem: Broadcom / LSI SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 89 IOMMU group: 18 Region 0: I/O ports at d000 [size=256] Region 1: Memory at d0ac0000 (64-bit, non-prefetchable) [size=16K] Region 3: Memory at d0680000 (64-bit, non-prefetchable) [size=256K] Expansion ROM at d0600000 [disabled] [size=512K] Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [68] Express (v2) Endpoint, MSI 00 DevCap: MaxPayload 4096 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ SlotPowerLimit 0.000W DevCtl: CorrErr+ NonFatalErr+ FatalErr+ UnsupReq+ RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+ FLReset- MaxPayload 512 bytes, MaxReadReq 512 bytes DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 5GT/s, Width x8, ASPM L0s, Exit Latency L0s <64ns ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp- LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 5GT/s (ok), Width x8 (ok) TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Range BC, TimeoutDis+ NROPrPrP- LTR- 10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix- EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit- FRS- TPHComp- ExtTPHComp- AtomicOpsCap: 32bit- 64bit- 128bitCAS- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- OBFF Disabled, AtomicOpsCtl: ReqEn- LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- EqualizationPhase1- EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest- Retimer- 2Retimers- CrosslinkRes: unsupported Capabilities: [d0] Vital Product Data pcilib: sysfs_read_vpd: read failed: No such device Not readable Capabilities: [a8] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [c0] MSI-X: Enable+ Count=15 Masked- Vector table: BAR=1 offset=00002000 PBA: BAR=1 offset=00003800 Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ AERCap: First Error Pointer: 00, ECRCGenCap+ ECRCGenEn- ECRCChkCap+ ECRCChkEn- MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap- HeaderLog: 00000000 00000000 00000000 00000000 Capabilities: [138 v1] Power Budgeting <?> Capabilities: [150 v1] Single Root I/O Virtualization (SR-IOV) IOVCap: Migration-, Interrupt Message Number: 000 IOVCtl: Enable- Migration- Interrupt- MSE- ARIHierarchy- IOVSta: Migration- Initial VFs: 16, Total VFs: 16, Number of VFs: 0, Function Dependency Link: 00 VF offset: 1, stride: 1, Device ID: 0072 Supported Page Size: 00000553, System Page Size: 00000001 Region 0: Memory at 00000000d0ac4000 (64-bit, non-prefetchable) Region 2: Memory at 00000000d06c0000 (64-bit, non-prefetchable) VF Migration: offset: 00000000, BIR: 0 Capabilities: [190 v1] Alternative Routing-ID Interpretation (ARI) ARICap: MFVC- ACS-, Next Function: 0 ARICtl: MFVC- ACS-, Function Group: 0 Kernel driver in use: mpt3sas Kernel modules: mpt3sas root@Tower:~# cat /sys/class/sas_host/host11/device/port-11\:0/sas_port/port-11\:0/num_phys 8 root@Tower:~# cat /sys/class/sas_host/host12/device/port-12\:0/sas_port/port-12\:0/num_phys 1 I have also attached diagnostics. I appreciate your help immensely. tower-diagnostics-20220829-1140.zip

I am yes, alright I wonder what it could be. I rebuilt a 10TB a few days ago @ 116.5 MB/s. Good to know. CPU is an AMD Ryzen 7 3800X

Yes, the board does, thanks for all the info so far. So in theory if all drives on the backplanes off the expander are populated (16), currently at 3GB/s would result in a max of 192MB/s per drive? If so, doesn't seem like an upgrade would net much with current HDD speeds.

Both cards currently are LSI SAS2008 based.

Intel RES2SV240 expander Drives are a combination of: HGST Deskstar NAS Seagate Ironwolf (NAS and Pros) And just some Seagate NAS and shucked desktop drives, might have a couple SMRs in there. Not deployed yet to upgrade some 4tb: WD Gold, Toshiba X300s (desktop performace they say) Edit: I do have a 2nd expander (same model) that's unused, unsure if it would help in any way.

Wondering if upgrading my HBA SAS 6G cards will net me more speed in rebuilds and parity checks. Case: Norco 4224, 6 backplanes, I'm told they are SAS 3 capable. Drives on all backplanes. Drives: All 7200rpm Current HBAs: Two 2-port sas2 cards. Card 1: both ports -> intel expander -> 4 ports to backplanes Card 2: both ports to remaining 2 backplanes Will upgrading to a SAS3 12Gbps card actually increase the hdd speeds at all? Cheers

I just deleted 2 torrents, and it deleted my entire share, luckily it wasn't a big share, but about 1TB of data. It deletes the root folder of the torrent so if you change location that can be bad. So yes, deleting a torrent deletes the data, moving a torrent redownloads, it's just a bug fest of a container. do not recommend.

Interesting, I tried changing my username to just user@, but still fails for me now using an app password. Edit: Nevermind, google just deleted the app password I had setup, created a new one and it works. Thanks

I setup this path after examining in the console for a minute. Seems to be working to save projects/data outside the docker image. Disclaimer, I've been running this merely for a few minutes only so far. I did leave the docker.sock mount as defined.