• Posts

  • Joined

  • Last visited

Everything posted by weltern

  1. IDK if anyone has done this with their Grafana Dashboard for this yet but I wanted to share it with everyone in case anyone else was curious. There are times when I am not home that I like to check on my server using Grafana and often wondered how I could tell if my UPS was using the AC or the Battery at any given time. I wondered this more so when I knew there was questionable weather near my house. Attached are screenshots of a Query I made that shows you whether or not your UPS is currently using the battery or if it is using the AC power. I'm not particularly good with grafana, I'm still learning, so I don't know if this will work for everyone's setup and UPS but if it does I hope you find it as useful as I do.
  2. Motherboard - Supermicro X9DR3(i)-F CPUs - Dual Intel Xeon E5-2670 v2 RAM - 128GB PCI-e NVMe Card - ASUS Hyper M.2 X16 PCIe 3.0 X4 Expansion Card V2 NVMe Drives - 1TB PM951 NVMe Samsung Using the above hardware i am having issues using bifurcation to have both NVMe show up in UnRaid to be used as cache drives. At best using another adapter, Dell dual PCIe NVMe adapter, I was able to get one to show up and even with two separate adapters only one showed up. Currently the ASUS card is sitting in CPU1 Slot2 PCIe x16 Gen 3 slot according to the Manual i found online and the two NVMe drives are sitting in slots 1 & 2. I've tried setting the bifurcation to x4x4x4x4, x4x4x8, x16, x4(4) as Gen 2, and am quickly running out of ideas to get this to work. So far the furtherest I've gotten with the ASUS card is only one drive showing up while the slot was set to x16 Gen3 in the BIOS. any other settings the slot was in resulted in neither of the drives in showing up. I know both drives are good because drives have individually shown up in Unraid but just not together, albeit one shows up more often than the other Maybe the one drive is not doing well or the MB has issue? Looking to see if anyone out there has the same hardware or issue and have gotten it to work. Not sure what i am missing (it is prob right in front of my face). There should be plenty of PCIe lanes from the dual CPUs. Any help is great appreciated. Thank you X9DR3(i)-F+ Manual.pdf
  3. Where are the files for this docker located after installation? Looked in AppData and didn't see anything in there. Hoping I can use this to enable the powershell extension and terminal in the VS Code server docker.
  4. Getting the same thing here. The issue appears to be caused when users (from what happened to me and others on here) reinstall the plug-in, either by choice or via an update (what happened to me), when on 6.7.0 The plugin worked for me before and after the upgrade from 6.6.1 to 6.7.0 however failed to work after it prompted me there was an update available (the 05.02.2019 update) for it and I went through the update, causing it to reinstall. Tried reinstalling the plugin from CA and from the link provided by the developer at the top of this thread. Also tried rebooting my server. No luck after either. only shows up in the location shown above, nothing under settings and when i click on the icon for the plugin on the above screen, it brings me to a blank page. Please advise. Thank you.