newoski

Hi newoski, You need to select which shares/folders you want to move. Move your mouse over the unRAID Shares Explorer at the bottom, it will display the red add button next to a folder. Choose the ones you want, then you should be good to go. Right, that makes sense, but it's only showing Shares. It's not showing individual Disks. My goal is to move all the contents from Disk# to the rest of the Array

I'm trying to use the plugin for the first time, compared to the docker. Instead of getting the Drives display, I can only access the below settings info. I get the same display -- shares only, no disks -- whether on Home or Settings menu. What am I missing?

i know what your saying about port 8081 and yes your right its not defined, however i have put in a blanket rule in there that should cover all container to container traffic, its this line:- -A INPUT -s 172.17.0.0/16 -d 172.17.0.0/16 -j ACCEPT and same for output:- -A OUTPUT -s 172.17.0.0/16 -d 172.17.0.0/16 -j ACCEPT so all containers in bridge mode wil have an ip address in the 172.17.x.x range and thus this will allow communication between them via the piggy in the middle, the piggy being your unraid host :-). this worked fine for me in testing when i was doing couchpotato to delugevpn connectivity checks, not sure why the script is having a problem, it might be that the python script is using a lower level module, hmm this is gonna be tricky to diagnose :-(. ok leave it with me, going to do some more testing. oh and btw i have confirmed i CAN talk from sabnzbdvpn to sickbeard via docker container ip, so that is working, still some testing to do:- [root@0a750bfbf398 /]# nc -zv 172.17.0.149 8081 172.17.0.149 8081 (sunproxyadmin) open above shows netcat can see an open port, this is from the sabnzbdvpn container to the ip of the running sickbeard container (172.17.0.149) on the normal port 8081 You have the AutoProcessTV folder from SickBeard with scripts, right? To review? Or do you need someone to post the default SickBeard autoprocess files?

agreed 100%

Yes it is a docker. Sab = 8080, 8090, 8118 both container and host SickNess =8081 both container and host Sent from my HTC6535LVW using Tapatalk

ok so im not that familiar with sickbeard, and thus i havent a clue which script your on about im afriad, any chance you can post some steps i can follow to replicate the issue?. https://jetshred.com/2012/07/31/configuring-sickbeard-to-work-with-sabnzbd-plus/ This should walk you through it. Make sure to follow the last setup, editing the cfg. Instead of monitoring the download folder, it immediately processes downloaded episodes. Let me know if you have any questions. Thanks for that, unfortunately i dont use usenet at the moment so i will only be able to go so far with testing this, i see it uses a cfg file, can you post it here (minus anything sensitive of course). Here is the sample cfg: # Sick Beard autoProcessTV configuration file # Used in combination with scripts like sabToSickBeard that call autoProcessTV # # Rename (or copy) autoProcessTV.cfg.sample to autoProcessTV.cfg # Change the host, port, username, and password values # to the appropriate settings for your Sick Beard server. # # Example: Sick Beard can be accessed on http://localhost:8081 # without username/password # # host=localhost # Sick Beard host (localhost or IP address) # port=8081 # Sick Beard port # username= # Credentials for logging into Sick Beard # password= # Credentials for logging into Sick Beard (don't use special characters) # web_root= # Sick Beard web_root # ssl=0 # http (ssl=0) (for https use ssl=1) [sickBeard] host=localhost port=8081 username= password= web_root=/ ssl=0 ------------------------- The variables at the bottom look like this on my setup: [sickBeard] host=10.0.0.9 port=8081 username= password= web_root=/ ssl=0 ok so there are no credentials sent through here, or did you just remove them?, also can you verify you have set sickbeard NOT to use ssl? correct. i don't use credentials (username/password). I dont think I have SSL enabled. I've never touched an SSL setting on SickBeard and it works perfectly with all other SAB clients, so I think my settings are correct

ok so im not that familiar with sickbeard, and thus i havent a clue which script your on about im afriad, any chance you can post some steps i can follow to replicate the issue?. https://jetshred.com/2012/07/31/configuring-sickbeard-to-work-with-sabnzbd-plus/ This should walk you through it. Make sure to follow the last setup, editing the cfg. Instead of monitoring the download folder, it immediately processes downloaded episodes. Let me know if you have any questions. Thanks for that, unfortunately i dont use usenet at the moment so i will only be able to go so far with testing this, i see it uses a cfg file, can you post it here (minus anything sensitive of course). Here is the sample cfg: # Sick Beard autoProcessTV configuration file # Used in combination with scripts like sabToSickBeard that call autoProcessTV # # Rename (or copy) autoProcessTV.cfg.sample to autoProcessTV.cfg # Change the host, port, username, and password values # to the appropriate settings for your Sick Beard server. # # Example: Sick Beard can be accessed on http://localhost:8081 # without username/password # # host=localhost # Sick Beard host (localhost or IP address) # port=8081 # Sick Beard port # username= # Credentials for logging into Sick Beard # password= # Credentials for logging into Sick Beard (don't use special characters) # web_root= # Sick Beard web_root # ssl=0 # http (ssl=0) (for https use ssl=1) [sickBeard] host=localhost port=8081 username= password= web_root=/ ssl=0 ------------------------- The variables at the bottom look like this on my setup: [sickBeard] host=10.0.0.9 port=8081 username= password= web_root=/ ssl=0

ok so im not that familiar with sickbeard, and thus i havent a clue which script your on about im afriad, any chance you can post some steps i can follow to replicate the issue?. If you have TeamViewer, shoot me a PM with your info and I can log in and walk you through recreating error if you'd like...

ok so im not that familiar with sickbeard, and thus i havent a clue which script your on about im afriad, any chance you can post some steps i can follow to replicate the issue?. https://jetshred.com/2012/07/31/configuring-sickbeard-to-work-with-sabnzbd-plus/ This should walk you through it. Make sure to follow the last setup, editing the cfg. Instead of monitoring the download folder, it immediately processes downloaded episodes. Let me know if you have any questions.

Testing it this way works fine. SickBeard can also send SABnzbdvpn snatched episodes without problems. The issue occurs when trying to use the SickBeard post processing script. It errors out every time

Perfect. Thanks! Sent from my HTC6535LVW using Tapatalk

Hi Guys, Are the steps below correct for converting an existing Reiserfs disk to XFS? 1. Transfer all the data off the drive 2. Stop the array 3. Change the file system for the emptied disk from Reiserfs to XFS 4. Start Array Will that properly wipe the Reiserfs file system and replace it with XFS?

assume you're referring to the same issue I am? SickBeard post processing? yes I was the one who posted this a while back in this thread. Sorry you are having the issue but also glad I am not the only one. It was driving me crazy. Ah, Roger. Thanks for the original post. I thought I was the only one. Fingers crossed we can get this addressed. It's near perfect Sent from my HTC6535LVW using Tapatalk

assume you're referring to the same issue I am? SickBeard post processing?

excellent, always nice to hear that it is working as expected :-), umm yeah that should be possible, depends how SB talks to sab though, can you post some screenshots of the SB config section?. its late over here so i will have to take a look at this tomorrow. that sickbeard screenshot looks a bit wrong, the url you have for sabnzbd is http://10.0.0.9:8079 if the ip is correct for the script then shouldnt it be http://192.168.1.5:8081 ? i know the script is seperate but it might be calling the sickbeard api to get certain info about sab. Checking back in here. Can I do anything else to help get this addressed? Sent from my HTC6535LVW using Tapatalk

Sorry for the confusion, I combined my response with a previous user who reported the same issue. On my network, IP addresses are all in the 10.0.0.X format. So in my log, the message is an error about opening http://10.0.0.X:8081/home/postprocess... excellent, always nice to hear that it is working as expected :-), umm yeah that should be possible, depends how SB talks to sab though, can you post some screenshots of the SB config section?. its late over here so i will have to take a look at this tomorrow. that sickbeard screenshot looks a bit wrong, the url you have for sabnzbd is http://10.0.0.9:8079 if the ip is correct for the script then shouldnt it be http://192.168.1.5:8081 ? i know the script is seperate but it might be calling the sickbeard api to get certain info about sab.

Any luck solving this? excellent, always nice to hear that it is working as expected :-), umm yeah that should be possible, depends how SB talks to sab though, can you post some screenshots of the SB config section?. its late over here so i will have to take a look at this tomorrow.

Any chance this could be updated to the latest Git release of SABnzbd? There are a few MAJOR bug fixes that just got released, including one where downloads are getting stuck at 99% and another with connection problems...

Any chance this could be updated to the latest Git release of SABnzbd? There are a few MAJOR bug fixes that just got released, including one where downloads are getting stuck at 99% and another with connection problems...

Right, that's the only workaround right now. Hoping we can get the script working as that is far superior... Out of curiosity, how long does it take SickBeard to process completed downloads with the method you described? Sent from my HTC6535LVW using Tapatalk

Thanks and sorry for the delayed reply here: The SickBeard script for SABnzbd errors out when trying to post-process the download: Loading config from /mnt/cache/docker/apps/sabnzbdvpn/scripts/autoProcessTV.cfg Opening URL: http://192.168.1.5:8081/home/postprocess/processEpisode?nzbName="Random_TV_Show" Unable to open URL: [Errno socket error] [Errno 110] Connection timed out Essentially, SABnzbvpn and SickBeard can't talk to each other, because one is behind the VPN and the other is not. Here's the SickBeard config: http://i66.tinypic.com/33a6xrn.png Let me know if you need anything else. A solution here would be amazing! excellent, always nice to hear that it is working as expected :-), umm yeah that should be possible, depends how SB talks to sab though, can you post some screenshots of the SB config section?. its late over here so i will have to take a look at this tomorrow.

THANKS! That confirmed that everything is working fine, it's just an outdated disconnect message that doesn't go away. Any idea if it's possible to get SickBeard communicating with SABnzbdvpn behind the VPN? It errors out when it tries to run the script That screenshot shows a download speed of 0 what makes you think it was still downloading? Sent from my SM-G900F using Tapatalk I don't know the latest ui for sab, is that not a limit set not the current download speed, or what you might be seeing is the cache which will empty out, did you see if it dropped to zero after a min or so? I'm confident it cannot download when the tunnel is down, there are firewall rules in place which will prevent this. Sent from my SM-G900F using Tapatalk ok so looking at the screenshot i would say the connection failed message is a failure to identify your public ip address, it does not necessarily mean the tunnel is down, it could simply mean the website they use to identify your public ip is offline, or there is a dns failure. run the following code, this should return back what your public ip is, it might fail if dns resolution is not working:- docker exec binhex-sabnzbdvpn curl jsonip.com

Is there a way to try to pull the IP4 Address via Telnet/Putty? That Connection Failed message never goes away That screenshot shows a download speed of 0 what makes you think it was still downloading? Sent from my SM-G900F using Tapatalk I don't know the latest ui for sab, is that not a limit set not the current download speed, or what you might be seeing is the cache which will empty out, did you see if it dropped to zero after a min or so? I'm confident it cannot download when the tunnel is down, there are firewall rules in place which will prevent this. Sent from my SM-G900F using Tapatalk

Nah, it's been downloading away for hours since showing the Connection Failed message. Still says Connection Failed. Still downloading away. A few transfers have started and completed, since the Connection Failed message That screenshot shows a download speed of 0 what makes you think it was still downloading? Sent from my SM-G900F using Tapatalk I don't know the latest ui for sab, is that not a limit set not the current download speed, or what you might be seeing is the cache which will empty out, did you see if it dropped to zero after a min or so? I'm confident it cannot download when the tunnel is down, there are firewall rules in place which will prevent this. Sent from my SM-G900F using Tapatalk

Look above it, at the SAB speed in the background. It says 1.6MB/sec That screenshot shows a download speed of 0 what makes you think it was still downloading? Sent from my SM-G900F using Tapatalk