sota

I'd like to figure out a way to monitor/mine/farm all the logs for all the forks, to see their activity in one place.

Yea. GUI startup does everything, except sync the specific wallet, I think. I might test that at some point.

just solved my memory problem. 4x 8GB DDR3 PC3-12800E chips, $84.50 shipped. that'll mean when done each machine has 3x8 1x4 chips in it. close enough to max.

think I've decided for now... no. having the GUIs running makes it easy to see if things are working right. I can script starting the GUIs, as well as the 2 timelords, easily enough, and that works.

well as I suspected i can do it. 'start farmer' kicks off farmer, wallet, full_node, harvester, and daemon. it binds EVERYTHING under that command prompt though. memory is lower: 9GB vs 11GB for 11 coins running. now to decide if that's worth it.

trying to figure out: 1) what's the minimum I need to run, of each coin (node? farmer+wallet?) 2) how to script it to start automatically if needed. 3) will it use less memory overall to do so, and will it be a significant impact. one of the difficulties, is any %coin% start <cmd> you run, is bound under the PS or CMD window you kicked it off from. so if you kill that window, it kills those functions. need to figure out how to: a) not have it do that b) prevent me from accidentally killing the PS/CMD window.

https://github.com/Apple-Network/apple-blockchain/releases/tag/1.2.30

I could have been one of those basement dwelling multi-PB people. I grew up though.

powershell: Get-content C:\users\chia\.chia\mainnet\log\debug.log -Tail 0 -Wait | where { $_ -match "eligible|adding coin|blocks " } edit to make it work for your particular fork/username

check the logs for PPF entries.

on a good note, i've almost with my powershell script that'll find and destroy faulty connects bad note, iv'e done such a good job in testing, there aren't any bad ones connecting right now, so I have no data to test with! woohoo! think it's done Attempting to disconnect NodeID 88fe8391 NodeID 88fe8391... FULL_NODE Attempting to disconnect NodeID f22ddd22 NodeID f22ddd22... FULL_NODE Attempting to disconnect NodeID c4d5f93b NodeID c4d5f93b... FULL_NODE Attempting to disconnect NodeID a917aad5 NodeID a917aad5... FULL_NODE

that's kind of why I did what I did. 300W is about 15% above my average loading at the house. I'm just going to leave it all alone at this point. Now what I'd REALLY like to see, is XCD go to $1/coin Wed 07/21/2021 15:44:47.59 -Total Balance: 3500.0 cgn (3500000000000000 mio) -Total Balance: 2.000001600351 xch (2000001600351 mojo) -Total Balance: 12.0 xfx (12000000000000 mojo) -Total Balance: 36.0 xfl (36000000000000 mojo) -Total Balance: 44.0 xgj (44000000000000 moji) -Total Balance: 56.0 hdd (56000000000000 mojo) -Total Balance: 52.0 xka (52000000000000 mojo) -Total Balance: 52.0 xse (52000000000000 mojo) -Total Balance: 56.0 spare (56000000000000 graviton) -Total Balance: 26.0 xtx (26000000000000 mojo) Wed 07/21/2021 15:45:10.05 -Total Balance: 24.0 avo (24000000000000 slice) -Total Balance: 230000.0 xcd (230000000000000 mojo) -Total Balance: 36.0 xdg (36000000000000 mojo) -Total Balance: 84.0 xeq (84000000000000 mojo) -Total Balance: 1500.0 gdog (1500000000000000 dog) -Total Balance: 98.0 xsc (98000000000000 octet) -Total Balance: 16.0 tsit (16000000000000 mojo) -Total Balance: 18.0 sock (18000000000000 msock) -Total Balance: 50.0 wheat (50000000000000 mojo)

tearing down all my older plotter machines. found 1 extra plot that didn't make it to the farm.

I'm building a machine for someone else, and it has an Nvidia P280 based card installed. The system boots normally, and the web GUI works remotely, but the local console screen is nothing but a blinking cursor. I'm guessing, it's taking the card and setting it up to pass through automatically? If so, how do i get that to stop, at least for now? It's amazing how impossible it is to find dirt cheap PCI-E generic video cards for this task. Thanks!

you can see with 10 forks running, she's getting to be a bit of a hog. I noticed with 17 running the CPU was working stupid hard. Now, each is only running around 15-20% average. plan is to eventually get enough memory to have each have 28GB or 32GB, and see what happens to memory. Also my power consumption is actually LESS with 2 machines running, than 1. seems the cooling fans are real power hogs. right now i'm in a bit of a limbo, as the vendor is sending me a replacement mainboard, since this latest one has a dead LSI 2008 chip; can't flash what the software can't see!

Mon 07/19/2021 10:33:29.31 -Total Balance: 3000.0 cgn (3000000000000000 mio) -Total Balance: 2.000001600351 xch (2000001600351 mojo) -Total Balance: 12.0 xfx (12000000000000 mojo) -Total Balance: 28.0 xfl (28000000000000 mojo) -Total Balance: 42.0 xgj (42000000000000 moji) -Total Balance: 54.0 hdd (54000000000000 mojo) -Total Balance: 44.0 xka (44000000000000 mojo) -Total Balance: 44.0 xse (44000000000000 mojo) -Total Balance: 56.0 spare (56000000000000 graviton) -Total Balance: 4.0 xtx (4000000000000 mojo) Mon 07/19/2021 10:34:01.90 -Total Balance: 20.0 avo (20000000000000 slice) -Total Balance: 170000.0 xcd (170000000000000 mojo) -Total Balance: 26.0 xdg (26000000000000 mojo) -Total Balance: 60.0 xeq (60000000000000 mojo) -Total Balance: 1300.0 gdog (1300000000000000 dog) -Total Balance: 64.0 xsc (64000000000000 octet) -Total Balance: 14.0 tsit (14000000000000 mojo) -Total Balance: 8.0 sock (8000000000000 msock) -Total Balance: 30.0 wheat (30000000000000 mojo) now shows up as split, since it's two different machines.

added 2 more to the list. melati doesn't appear to be functioning yet.

%sector% show -a 94.3.32.187:5765 %sector% show -a 185.52.22.15:5765 %sector% show -a 14.224.132.170:5765 %sector% show -a 147.158.164.226:5765 %sector% show -a 87.8.236.220:5765 %sector% show -a 104.35.79.251:5765 %sector% show -a 62.83.212.197:5765 got nothing for socks though.

what's your height at? 58812 was what i just saw. the trick is, if you're not patched, you won't ACTUALLY earn anything, even if you win. https://discord.com/channels/858805974046474241/859065054041341993/866010170936000523

updated my list post.

https://discord.com/channels/858805974046474241/859065054041341993

WINDOWS INSTRUCTIONS FOR UPDATING TO NEW VERSION (1.) Backup your config.yaml file in %systemdrive%\Users%username%.hddcoin\mainnet\config (2.) Close the HDDCoin client and wait for it to fully close. Otherwise click close ("X") on the HDDcoin Clinet window. (3.) Navigate back to C:\Users%username%\ and delete the ".hddcoin" folder (VERY IMPORTANT - The update will fail if you miss this step, and you will lose sync (4.) Download and install a fresh copy of HDDcoin from https://github.com/HDDcoin-Network/hddcoin-blockchain/releases (If HDDcoin automatically launches after the install, wait for the login screen, then exit the app) (5.) Restore your previously backed up config.yaml file back to %systemdrive%\Users%username%.hddcoin\mainnet\config (6.) Download the latest blockchain database file from http://hddcoin.org/downloads/blockchain_v1_mainnet.sqlite (7.) Restore the blockchain database to %systemdrive%\Users%username%.hddcoin\mainnet\db (8.) Start HDDcoin and verify that you are able to sync, and that you are getting challenges.

added my 18th fork. https://github.com/Socks-Network/socks-blockchain

hddcoin did a thing.

it's a built in adapter. you think that might still work?