grither

hi, here are my settings. i am now seeing that sometimes it works, and sometimes it doesn't! super annoying. for example, just downloaded an album just fine, but it won't extract a movie. some tv shows fine, but some just hang there. maybe size related? tons of room on my array, and my cache. for example, just downloaded 3 tv shows, the first two episdoes downloaded and were sorted fine, the last one just hangs at 100% downloaded. really up for any suggestions!!!

hello thanks for this, really appreciate it. tried but no luck... think there could be an issue relating to what user sab is running as? wonder how i can check that?

hi, summary of my issue: files are sitting in download queue at 100% downloaded, but are not unpacking. Getting error 'cannot create final folder (filename)' background fully working system for years, uptime of over 6 months! formerly using needo docker for sab, and noticed this morning that i had 6 files in the queue, fully downloaded but not unpacked. a bit of research showed that needos docker was out of date, so installed the linuxserver one, rebooted server. copied over settings, got it up and running fine. But same problem! anything added to queue will download, but not unpack. Not sure why this issue appeared out of nowhere, and occured under both dockers. any advice? PS. in sab setting, tried changing permissions, currently set to 777, tried 770 but then got this error when trying to save Cannot create complete_dir folder /mnt/user/Stuff to burn/! unzip there appears to be some problem with sab accessing my folders... sabnzbd (1).log

hi all, this is a result of preclear from a new 8tb seagate archive drive... everything look ok? wasn't sure about high fly writes, or Hardware ECC recovered? Disk: /dev/sdh smartctl 6.2 2013-07-26 r3841 [x86_64-linux-4.1.17-unRAID] (local build) Copyright © 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: ST8000AS0002-1NA17Z Serial Number: Z840DGAZ LU WWN Device Id: 5 000c50 087ebda8a Firmware Version: AR15 User Capacity: 8,001,563,222,016 bytes [8.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5980 rpm Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Tue Mar 1 11:18:36 2016 CST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 947) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x30a5) SCT Status supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 110 100 006 Pre-fail Always - 26155608 3 Spin_Up_Time 0x0003 099 099 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 1 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 073 060 030 Pre-fail Always - 21054474 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 75 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 1 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 189 High_Fly_Writes 0x003a 088 088 000 Old_age Always - 12 190 Airflow_Temperature_Cel 0x0022 065 062 045 Old_age Always - 35 (Min/Max 21/38) 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 2 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 3 194 Temperature_Celsius 0x0022 035 040 000 Old_age Always - 35 (0 21 0 0 0) 195 Hardware_ECC_Recovered 0x001a 110 100 000 Old_age Always - 26155608 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 219988224901195 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 15628053216 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 47793036504 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.

hi all! i had been using the eroz airvideoserver, which worked well for me, however i couldn't get it to work with my new apple tv, it would never connect. eroz suggested that i try airvideohd as it may work... for some reason, when i install airvideohd, i can't get anything to connect. the log files seems to suggest an error with bonjour... any suggestions on how to resolve this? i will attach my logs as well...any help is greatly appreciated! server_prop_and_network_log.zip

thanks, i assumed the two programs were similar... for some reason i can't get the other one working! but i can use yours fine (except for with appletv) will try to keep working the other one

I have this working with my iphone and ipad, but cannot get it working with my appletv v4! any advice? some research says that airvideo needs to be version 2.2.1, but i can't tell what is inside this docker, or how to update the version. any advice?

Interesting read, i upgrade to v6 last night. got plex up and running, played some movies and tv shows fine. then set /transcode to /tmp, and changed the plex settings to /transcode played a few HD tv shows, and worked great. these are all around the 1gb size. then tried some movies, coudln't get a single one to play! very odd, they are all around the 8gb mark in size removed the /transcode reference in plex settings, and then all tv and movies played fine. i have a system with 16gb ram (spread over 2 cpu) so i would have thought i have plenty! not sure if the 'broken' plex has been fixed yet.

hi, i am about to upgrade but can't tell what exact version i'm on! in the gui in the upper right it says 5.0, but i'm unsure if i'll need to run new permissions or not also, are there any good guides on how to move apps to dockers? i'm running sab, sickbeard and plex on plugins today, but would like to move to dockers

just as an update, i can't seem to format the drive in windows either regardless of quick format or long format. so something must be really screwed with the drive can someone tell me how to reboot with memtest? i've tried searching but can't tell how...

thanks for all the feedback. can anyone point me in the right direction in terms of how to run a memory test on the server?

okay reran with updated script. still got weird error from before. will remove from system however i'm wondering what it actually means, and what caused it? ========================================================================1.15 == invoked as: ./preclear_disk.sh -M 4 /dev/sdp == == Disk /dev/sdp has NOT been successfully precleared == Postread detected un-expected non-zero bytes on disk== == Ran 1 cycle == == Using :Read block size = 8388608 Bytes == Last Cycle's Pre Read Time : 8:06:47 (68 MB/s) == Last Cycle's Zeroing time : 7:09:45 (77 MB/s) == Last Cycle's Post Read Time : 15:38:23 (35 MB/s) == Last Cycle's Total Time : 30:55:57 == == Total Elapsed Time 30:55:57 == == Disk Start Temperature: 33C == == Current Disk Temperature: 32C, == ============================================================================ ** Changed attributes in files: /tmp/smart_start_sdp /tmp/smart_finish_sdp ATTRIBUTE NEW_VAL OLD_VAL FAILURE_THRESHOLD STATUS RAW_VALUE Temperature_Celsius = 120 119 0 ok 32 No SMART attributes are FAILING_NOW 0 sectors were pending re-allocation before the start of the preclear. 0 sectors were pending re-allocation after pre-read in cycle 1 of 1. 0 sectors were pending re-allocation after zero of disk in cycle 1 of 1. 0 sectors are pending re-allocation at the end of the preclear, the number of sectors pending re-allocation did not change. 0 sectors had been re-allocated before the start of the preclear. 0 sectors are re-allocated at the end of the preclear, the number of sectors re-allocated did not change. ============================================================================ ============================================================================ ==

oops didn't notice i was using old version just updated and restarted the preclear. i'm fairly certain i'm just going to dispose of this drive once preclear is done. after losing a full drive of data i would be insane to put this back in my server even if results come back clear right?

hi all, wanted to run my preclear results by you. i've highlighted the part in bold that looks weird to me. for some background, this is a drive that flaked out on my one day and i lost ALL the data on it. i don't intend to reuse it, however i ran preclear to see what it would say. it says it has NOT been successfully precleared? =======================================================================1.13 == invoked as: ./preclear_disk.sh -M 4 /dev/sdp == == Disk /dev/sdp has NOT been successfully precleared == Postread detected un-expected non-zero bytes on disk== == Ran 1 cycle == == Using :Read block size = 8225280 Bytes == Last Cycle's Pre Read Time : 8:07:02 (68 MB/s) == Last Cycle's Zeroing time : 7:09:46 (77 MB/s) == Last Cycle's Post Read Time : 15:36:35 (35 MB/s) == Last Cycle's Total Time : 30:54:24 == == Total Elapsed Time 30:54:24 == == Disk Start Temperature: 34C == == Current Disk Temperature: 34C, == ============================================================================ No SMART attributes are FAILING_NOW 0 sectors were pending re-allocation before the start of the preclear. 0 sectors were pending re-allocation after pre-read in cycle 1 of 1. 0 sectors were pending re-allocation after zero of disk in cycle 1 of 1. 0 sectors are pending re-allocation at the end of the preclear, the number of sectors pending re-allocation did not change. 0 sectors had been re-allocated before the start of the preclear. 0 sectors are re-allocated at the end of the preclear, the number of sectors re-allocated did not change. ============================================================================ ============================================================================ == == S.M.A.R.T Initial Report for /dev/sdp == Disk: /dev/sdp smartctl 5.40 2010-10-16 r3189 [i486-slackware-linux-gnu] (local build) Copyright © 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Green family Device Model: WDC WD20EADS-00R6B0 Serial Number: WD-WCAVY0403098 Firmware Version: 01.00A01 User Capacity: 2,000,398,934,016 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Tue Oct 21 20:21:21 2014 CDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (43200) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 255) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 48 3 Spin_Up_Time 0x0027 158 149 021 Pre-fail Always - 9066 4 Start_Stop_Count 0x0032 087 087 000 Old_age Always - 13980 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 040 040 000 Old_age Always - 43972 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 118 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 8 193 Load_Cycle_Count 0x0032 196 196 000 Old_age Always - 13260 194 Temperature_Celsius 0x0022 118 094 000 Old_age Always - 34 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. == ============================================================================ ============================================================================ == == S.M.A.R.T Final Report for /dev/sdp == Disk: /dev/sdp smartctl 5.40 2010-10-16 r3189 [i486-slackware-linux-gnu] (local build) Copyright © 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Green family Device Model: WDC WD20EADS-00R6B0 Serial Number: WD-WCAVY0403098 Firmware Version: 01.00A01 User Capacity: 2,000,398,934,016 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Thu Oct 23 03:15:44 2014 CDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (43200) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 255) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 48 3 Spin_Up_Time 0x0027 158 149 021 Pre-fail Always - 9066 4 Start_Stop_Count 0x0032 087 087 000 Old_age Always - 13980 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 040 040 000 Old_age Always - 44002 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 118 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 8 193 Load_Cycle_Count 0x0032 196 196 000 Old_age Always - 13260 194 Temperature_Celsius 0x0022 118 094 000 Old_age Always - 34 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. == ============================================================================

Definitely the right move and now my journey on using hard drives as separate backup begins!!!

ok here's the third and final preclear of this disk. still appears to have pending sectors. will remove from array ========================================================================1.13 == invoked as: ./preclear_disk.sh -M 4 /dev/sdj == WDC WD20EARS-00S8B1 WD-WCAVY2471414 == Disk /dev/sdj has been successfully precleared == with a starting sector of 64 == Ran 1 cycle == == Using :Read block size = 8225280 Bytes == Last Cycle's Pre Read Time : 7:53:47 (70 MB/s) == Last Cycle's Zeroing time : 6:55:30 (80 MB/s) == Last Cycle's Post Read Time : 15:27:55 (35 MB/s) == Last Cycle's Total Time : 30:18:13 == == Total Elapsed Time 30:18:13 == == Disk Start Temperature: 33C == == Current Disk Temperature: 37C, == ============================================================================ ** Changed attributes in files: /tmp/smart_start_sdj /tmp/smart_finish_sdj ATTRIBUTE NEW_VAL OLD_VAL FAILURE_THRESHOLD STATUS RAW_VALUE Reallocated_Sector_Ct = 185 186 140 ok 117 Temperature_Celsius = 115 119 0 ok 37 Reallocated_Event_Count = 86 90 0 ok 114 No SMART attributes are FAILING_NOW 7 sectors were pending re-allocation before the start of the preclear. 7 sectors were pending re-allocation after pre-read in cycle 1 of 1. 0 sectors were pending re-allocation after zero of disk in cycle 1 of 1. 1 sector is pending re-allocation at the end of the preclear, a change of -6 in the number of sectors pending re-allocation. 112 sectors had been re-allocated before the start of the preclear. 117 sectors are re-allocated at the end of the preclear, a change of 5 in the number of sectors re-allocated. ============================================================================ ============================================================================ == == S.M.A.R.T Initial Report for /dev/sdj == Disk: /dev/sdj smartctl 5.40 2010-10-16 r3189 [i486-slackware-linux-gnu] (local build) Copyright © 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Green (Adv. Format) family Device Model: WDC WD20EARS-00S8B1 Serial Number: WD-WCAVY2471414 Firmware Version: 80.00A80 User Capacity: 2,000,398,934,016 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Wed Oct 16 06:02:16 2013 CDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (40800) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 255) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3031) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 146 141 021 Pre-fail Always - 9675 4 Start_Stop_Count 0x0032 095 095 000 Old_age Always - 5160 5 Reallocated_Sector_Ct 0x0033 186 186 140 Pre-fail Always - 112 7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0 9 Power_On_Hours 0x0032 071 071 000 Old_age Always - 21347 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1026 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 88 193 Load_Cycle_Count 0x0032 171 171 000 Old_age Always - 88133 194 Temperature_Celsius 0x0022 119 110 000 Old_age Always - 33 196 Reallocated_Event_Count 0x0032 090 090 000 Old_age Always - 110 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 7 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 4 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 199 000 Old_age Offline - 10 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. == ============================================================================ ============================================================================ == == S.M.A.R.T Final Report for /dev/sdj == Disk: /dev/sdj smartctl 5.40 2010-10-16 r3189 [i486-slackware-linux-gnu] (local build) Copyright © 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Green (Adv. Format) family Device Model: WDC WD20EARS-00S8B1 Serial Number: WD-WCAVY2471414 Firmware Version: 80.00A80 User Capacity: 2,000,398,934,016 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Thu Oct 17 12:20:29 2013 CDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (40800) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 255) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3031) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 146 141 021 Pre-fail Always - 9675 4 Start_Stop_Count 0x0032 095 095 000 Old_age Always - 5160 5 Reallocated_Sector_Ct 0x0033 185 185 140 Pre-fail Always - 117 7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0 9 Power_On_Hours 0x0032 071 071 000 Old_age Always - 21376 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1026 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 88 193 Load_Cycle_Count 0x0032 171 171 000 Old_age Always - 88135 194 Temperature_Celsius 0x0022 115 110 000 Old_age Always - 37 196 Reallocated_Event_Count 0x0032 086 086 000 Old_age Always - 114 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 1 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 4 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 199 000 Old_age Offline - 10 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. == ============================================================================

Ok I agree. Started a third preclear just out of curiosity before I got your responses. I think even if the sectors are cleared I will remove and use for backup

Ok here's a second preclear on the drive above.....if i'm reading correctly, the first clear above resulted in 3 pending sectors at the end....when i started this second preclear, there were 5 at the start, 0 after the zeroing, but then 6 at the end. so it seems like bad sectors are popping up, getting fixed, but then new ones are popping up drive is out of warranty. should i run a third preclear? i suspect i know what the outcome will be! ========================================================================1.13 == invoked as: ./preclear_disk.sh -M 4 /dev/sdj == WDC WD20EARS-00S8B1 WD-WCAVY2471414 == Disk /dev/sdj has been successfully precleared == with a starting sector of 64 == Ran 1 cycle == == Using :Read block size = 8225280 Bytes == Last Cycle's Pre Read Time : 7:53:24 (70 MB/s) == Last Cycle's Zeroing time : 6:55:29 (80 MB/s) == Last Cycle's Post Read Time : 15:27:00 (35 MB/s) == Last Cycle's Total Time : 30:16:55 == == Total Elapsed Time 30:16:55 == == Disk Start Temperature: 30C == == Current Disk Temperature: 37C, == ============================================================================ ** Changed attributes in files: /tmp/smart_start_sdj /tmp/smart_finish_sdj ATTRIBUTE NEW_VAL OLD_VAL FAILURE_THRESHOLD STATUS RAW_VALUE Temperature_Celsius = 115 122 0 ok 37 Reallocated_Event_Count = 90 95 0 ok 110 No SMART attributes are FAILING_NOW 5 sectors were pending re-allocation before the start of the preclear. 5 sectors were pending re-allocation after pre-read in cycle 1 of 1. 0 sectors were pending re-allocation after zero of disk in cycle 1 of 1. 6 sectors are pending re-allocation at the end of the preclear, a change of 1 in the number of sectors pending re-allocation. 107 sectors had been re-allocated before the start of the preclear. 112 sectors are re-allocated at the end of the preclear, a change of 5 in the number of sectors re-allocated. ============================================================================ ============================================================================ == == S.M.A.R.T Initial Report for /dev/sdj == Disk: /dev/sdj smartctl 5.40 2010-10-16 r3189 [i486-slackware-linux-gnu] (local build) Copyright © 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Green (Adv. Format) family Device Model: WDC WD20EARS-00S8B1 Serial Number: WD-WCAVY2471414 Firmware Version: 80.00A80 User Capacity: 2,000,398,934,016 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Mon Oct 14 16:22:36 2013 CDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (40800) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 255) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3031) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 146 141 021 Pre-fail Always - 9675 4 Start_Stop_Count 0x0032 095 095 000 Old_age Always - 5160 5 Reallocated_Sector_Ct 0x0033 186 186 140 Pre-fail Always - 107 7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0 9 Power_On_Hours 0x0032 071 071 000 Old_age Always - 21310 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1026 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 88 193 Load_Cycle_Count 0x0032 171 171 000 Old_age Always - 88032 194 Temperature_Celsius 0x0022 122 110 000 Old_age Always - 30 196 Reallocated_Event_Count 0x0032 095 095 000 Old_age Always - 105 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 5 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 3 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 199 000 Old_age Offline - 8 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. == ============================================================================ ============================================================================ == == S.M.A.R.T Final Report for /dev/sdj == Disk: /dev/sdj smartctl 5.40 2010-10-16 r3189 [i486-slackware-linux-gnu] (local build) Copyright © 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Green (Adv. Format) family Device Model: WDC WD20EARS-00S8B1 Serial Number: WD-WCAVY2471414 Firmware Version: 80.00A80 User Capacity: 2,000,398,934,016 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Tue Oct 15 22:39:30 2013 CDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (40800) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 255) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3031) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 146 141 021 Pre-fail Always - 9675 4 Start_Stop_Count 0x0032 095 095 000 Old_age Always - 5160 5 Reallocated_Sector_Ct 0x0033 186 186 140 Pre-fail Always - 112 7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0 9 Power_On_Hours 0x0032 071 071 000 Old_age Always - 21340 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1026 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 88 193 Load_Cycle_Count 0x0032 171 171 000 Old_age Always - 88034 194 Temperature_Celsius 0x0022 115 110 000 Old_age Always - 37 196 Reallocated_Event_Count 0x0032 090 090 000 Old_age Always - 110 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 6 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 3 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 199 000 Old_age Offline - 8 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. == ============================================================================

Ok will do. Out of town for a few days but will do when back!

ok here's my last preclear... this one looks the most concerning if i'm understanding right looks like some sectors were pending reallocation, and some were fixed, and some were not (or maybe all were fixed, and some new problem sectors arose?) ========================================================================1.13 == invoked as: ./preclear_disk.sh -M 4 /dev/sdj == WDC WD20EARS-00S8B1 WD-WCAVY2471414 == Disk /dev/sdj has been successfully precleared == with a starting sector of 64 == Ran 1 cycle == == Using :Read block size = 8225280 Bytes == Last Cycle's Pre Read Time : 8:24:17 (66 MB/s) == Last Cycle's Zeroing time : 6:56:57 (79 MB/s) == Last Cycle's Post Read Time : 15:25:23 (36 MB/s) == Last Cycle's Total Time : 30:47:39 == == Total Elapsed Time 30:47:39 == == Disk Start Temperature: 38C == == Current Disk Temperature: 35C, == ============================================================================ ** Changed attributes in files: /tmp/smart_start_sdj /tmp/smart_finish_sdj ATTRIBUTE NEW_VAL OLD_VAL FAILURE_THRESHOLD STATUS RAW_VALUE Reallocated_Sector_Ct = 186 187 140 ok 107 Temperature_Celsius = 117 114 0 ok 35 Reallocated_Event_Count = 95 102 0 ok 105 No SMART attributes are FAILING_NOW 9 sectors were pending re-allocation before the start of the preclear. 9 sectors were pending re-allocation after pre-read in cycle 1 of 1. 0 sectors were pending re-allocation after zero of disk in cycle 1 of 1. 3 sectors are pending re-allocation at the end of the preclear, a change of -6 in the number of sectors pending re-allocation. 100 sectors had been re-allocated before the start of the preclear. 107 sectors are re-allocated at the end of the preclear, a change of 7 in the number of sectors re-allocated. ============================================================================ ============================================================================ == == S.M.A.R.T Initial Report for /dev/sdj == Disk: /dev/sdj smartctl 5.40 2010-10-16 r3189 [i486-slackware-linux-gnu] (local build) Copyright © 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Green (Adv. Format) family Device Model: WDC WD20EARS-00S8B1 Serial Number: WD-WCAVY2471414 Firmware Version: 80.00A80 User Capacity: 2,000,398,934,016 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Wed Oct 9 18:47:45 2013 CDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (40800) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 255) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3031) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 146 141 021 Pre-fail Always - 9675 4 Start_Stop_Count 0x0032 095 095 000 Old_age Always - 5160 5 Reallocated_Sector_Ct 0x0033 187 187 140 Pre-fail Always - 100 7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0 9 Power_On_Hours 0x0032 071 071 000 Old_age Always - 21195 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1026 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 88 193 Load_Cycle_Count 0x0032 171 171 000 Old_age Always - 87511 194 Temperature_Celsius 0x0022 114 110 000 Old_age Always - 38 196 Reallocated_Event_Count 0x0032 102 102 000 Old_age Always - 98 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 9 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 199 000 Old_age Offline - 9 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. == ============================================================================ ============================================================================ == == S.M.A.R.T Final Report for /dev/sdj == Disk: /dev/sdj smartctl 5.40 2010-10-16 r3189 [i486-slackware-linux-gnu] (local build) Copyright © 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Green (Adv. Format) family Device Model: WDC WD20EARS-00S8B1 Serial Number: WD-WCAVY2471414 Firmware Version: 80.00A80 User Capacity: 2,000,398,934,016 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Fri Oct 11 01:35:25 2013 CDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (40800) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 255) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3031) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 146 141 021 Pre-fail Always - 9675 4 Start_Stop_Count 0x0032 095 095 000 Old_age Always - 5160 5 Reallocated_Sector_Ct 0x0033 186 186 140 Pre-fail Always - 107 7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0 9 Power_On_Hours 0x0032 071 071 000 Old_age Always - 21226 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1026 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 88 193 Load_Cycle_Count 0x0032 171 171 000 Old_age Always - 87511 194 Temperature_Celsius 0x0022 117 110 000 Old_age Always - 35 196 Reallocated_Event_Count 0x0032 095 095 000 Old_age Always - 105 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 3 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 199 000 Old_age Offline - 9 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. == ============================================================================

ok here's another drive that had pending sector reallocations... it only had two, and i think they are now corrected. any thoughts on what i should do with this drive? ========================================================================1.13 == invoked as: ./preclear_disk.sh -M 4 /dev/sdu == WDC WD20EARS-00MVWB0 WD-WMAZA0823880 == Disk /dev/sdu has been successfully precleared == with a starting sector of 64 == Ran 1 cycle == == Using :Read block size = 8225280 Bytes == Last Cycle's Pre Read Time : 7:14:18 (76 MB/s) == Last Cycle's Zeroing time : 5:53:47 (94 MB/s) == Last Cycle's Post Read Time : 13:15:10 (41 MB/s) == Last Cycle's Total Time : 26:24:17 == == Total Elapsed Time 26:24:17 == == Disk Start Temperature: 31C == == Current Disk Temperature: 35C, == ============================================================================ ** Changed attributes in files: /tmp/smart_start_sdu /tmp/smart_finish_sdu ATTRIBUTE NEW_VAL OLD_VAL FAILURE_THRESHOLD STATUS RAW_VALUE Seek_Error_Rate = 100 200 0 ok 0 Temperature_Celsius = 115 118 0 ok 35 No SMART attributes are FAILING_NOW 2 sectors were pending re-allocation before the start of the preclear. 2 sectors were pending re-allocation after pre-read in cycle 1 of 1. 0 sectors were pending re-allocation after zero of disk in cycle 1 of 1. 0 sectors are pending re-allocation at the end of the preclear, a change of -2 in the number of sectors pending re-allocation. 0 sectors had been re-allocated before the start of the preclear. 0 sectors are re-allocated at the end of the preclear, the number of sectors re-allocated did not change. ============================================================================ ============================================================================ == == S.M.A.R.T Initial Report for /dev/sdu == Disk: /dev/sdu smartctl 5.40 2010-10-16 r3189 [i486-slackware-linux-gnu] (local build) Copyright © 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Green (Adv. Format) family Device Model: WDC WD20EARS-00MVWB0 Serial Number: WD-WMAZA0823880 Firmware Version: 51.0AB51 User Capacity: 2,000,398,934,016 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Wed Oct 9 18:48:47 2013 CDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (36180) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 255) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 174 164 021 Pre-fail Always - 6283 4 Start_Stop_Count 0x0032 095 095 000 Old_age Always - 5246 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 074 074 000 Old_age Always - 19532 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 791 192 Power-Off_Retract_Count 0x0032 199 199 000 Old_age Always - 763 193 Load_Cycle_Count 0x0032 166 166 000 Old_age Always - 102987 194 Temperature_Celsius 0x0022 118 113 000 Old_age Always - 32 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 2 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 12 200 Multi_Zone_Error_Rate 0x0008 200 197 000 Old_age Offline - 67 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. == ============================================================================ ============================================================================ == == S.M.A.R.T Final Report for /dev/sdu == Disk: /dev/sdu smartctl 5.40 2010-10-16 r3189 [i486-slackware-linux-gnu] (local build) Copyright © 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Green (Adv. Format) family Device Model: WDC WD20EARS-00MVWB0 Serial Number: WD-WMAZA0823880 Firmware Version: 51.0AB51 User Capacity: 2,000,398,934,016 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Thu Oct 10 21:13:05 2013 CDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (36180) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 255) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 174 164 021 Pre-fail Always - 6283 4 Start_Stop_Count 0x0032 095 095 000 Old_age Always - 5246 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0 9 Power_On_Hours 0x0032 074 074 000 Old_age Always - 19558 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 791 192 Power-Off_Retract_Count 0x0032 199 199 000 Old_age Always - 763 193 Load_Cycle_Count 0x0032 166 166 000 Old_age Always - 102987 194 Temperature_Celsius 0x0022 115 113 000 Old_age Always - 35 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 12 200 Multi_Zone_Error_Rate 0x0008 200 197 000 Old_age Offline - 67 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. == ============================================================================

Great suggestion. Will give it some thought

thanks Gary... that's probably a good way to look at backups for me, i tend to burn to dvd almost everything before it goes on my server... the exception is super large movie files....so if i had a catastrophic loss, i could reload the most important parts off dvd but it would be a chore for sure. but at least its something

thanks Gary, no one could ever accuse you of not being a champion for backups!!! :D do you happen to know what the 'reported uncorrect' error means? seems like some of these smart criteria are serious, and some are not, but i've never heard about this one before

hi there! i have a second drive's preclear result (mine is also the previous post). thought it might be best to have these results in a separate post. overall i think these look okay, but there is one error called 'reported uncorrect' which i've never seen before... think its a concern? this drive used to be my parity drive, and i recently removed it to upgrade to a 4tb parity. my plan was to add the former drive to the array (ie add this precleared drive to the array) but just a bit unsure what this indicator means. ========================================================================1.13 == invoked as: ./preclear_disk.sh -M 4 /dev/sdc == ST3000DM001-9YN166 W1F0A74C == Disk /dev/sdc has been successfully precleared == with a starting sector of 1 == Ran 1 cycle == == Using :Read block size = 8225280 Bytes == Last Cycle's Pre Read Time : 17:00:19 (49 MB/s) == Last Cycle's Zeroing time : 8:59:07 (92 MB/s) == Last Cycle's Post Read Time : 14:22:40 (57 MB/s) == Last Cycle's Total Time : 40:23:08 == == Total Elapsed Time 40:23:08 == == Disk Start Temperature: 33C == == Current Disk Temperature: 33C, == ============================================================================ ** Changed attributes in files: /tmp/smart_start_sdc /tmp/smart_finish_sdc ATTRIBUTE NEW_VAL OLD_VAL FAILURE_THRESHOLD STATUS RAW_VALUE Raw_Read_Error_Rate = 119 105 6 ok 212052856 Spin_Retry_Count = 100 100 97 near_thresh 0 End-to-End_Error = 100 100 99 near_thresh 0 Airflow_Temperature_Cel = 67 67 45 near_thresh 33 No SMART attributes are FAILING_NOW 0 sectors were pending re-allocation before the start of the preclear. 0 sectors were pending re-allocation after pre-read in cycle 1 of 1. 0 sectors were pending re-allocation after zero of disk in cycle 1 of 1. 0 sectors are pending re-allocation at the end of the preclear, the number of sectors pending re-allocation did not change. 0 sectors had been re-allocated before the start of the preclear. 0 sectors are re-allocated at the end of the preclear, the number of sectors re-allocated did not change. ============================================================================ ============================================================================ == == S.M.A.R.T Initial Report for /dev/sdc == Disk: /dev/sdc smartctl 5.40 2010-10-16 r3189 [i486-slackware-linux-gnu] (local build) Copyright © 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Device Model: ST3000DM001-9YN166 Serial Number: W1F0A74C Firmware Version: CC4C User Capacity: 3,000,592,982,016 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 4 Local Time is: Mon Oct 7 21:40:26 2013 CDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 575) seconds. Offline data collection capabilities: (0x73) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 255) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x3085) SCT Status supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 105 099 006 Pre-fail Always - 9611664 3 Spin_Up_Time 0x0003 092 092 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 097 097 020 Old_age Always - 3335 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 074 060 030 Pre-fail Always - 12974673520 9 Power_On_Hours 0x0032 085 085 000 Old_age Always - 13364 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 70 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 099 099 000 Old_age Always - 1 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 067 063 045 Old_age Always - 33 (Min/Max 30/33) 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 47 193 Load_Cycle_Count 0x0032 086 086 000 Old_age Always - 28237 194 Temperature_Celsius 0x0022 033 040 000 Old_age Always - 33 (0 20 0 0) 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 47579647707130 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 26207571582031 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 13735539661044 SMART Error Log Version: 1 ATA Error Count: 1 CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 1 occurred at disk power-on lifetime: 12787 hours (532 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 d1 00 ff ff ff ef 00 03:13:56.421 READ DMA EXT 25 d1 00 ff ff ff ef 00 03:13:56.401 READ DMA EXT 35 d1 60 ff ff ff ef 00 03:13:56.395 WRITE DMA EXT 35 d1 00 ff ff ff ef 00 03:13:56.392 WRITE DMA EXT 35 d1 a0 ff ff ff ef 00 03:13:56.389 WRITE DMA EXT SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. == ============================================================================ ============================================================================ == == S.M.A.R.T Final Report for /dev/sdc == Disk: /dev/sdc smartctl 5.40 2010-10-16 r3189 [i486-slackware-linux-gnu] (local build) Copyright © 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Device Model: ST3000DM001-9YN166 Serial Number: W1F0A74C Firmware Version: CC4C User Capacity: 3,000,592,982,016 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 4 Local Time is: Wed Oct 9 14:03:34 2013 CDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 575) seconds. Offline data collection capabilities: (0x73) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 255) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x3085) SCT Status supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 119 099 006 Pre-fail Always - 212052856 3 Spin_Up_Time 0x0003 092 092 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 097 097 020 Old_age Always - 3335 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 074 060 030 Pre-fail Always - 12974855868 9 Power_On_Hours 0x0032 085 085 000 Old_age Always - 13404 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 70 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 099 099 000 Old_age Always - 1 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 067 063 045 Old_age Always - 33 (Min/Max 30/36) 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 47 193 Load_Cycle_Count 0x0032 086 086 000 Old_age Always - 28237 194 Temperature_Celsius 0x0022 033 040 000 Old_age Always - 33 (0 20 0 0) 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 13052405614626 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 27093875101718 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 14329507908586 SMART Error Log Version: 1 ATA Error Count: 1 CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 1 occurred at disk power-on lifetime: 12787 hours (532 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 d1 00 ff ff ff ef 00 03:13:56.421 READ DMA EXT 25 d1 00 ff ff ff ef 00 03:13:56.401 READ DMA EXT 35 d1 60 ff ff ff ef 00 03:13:56.395 WRITE DMA EXT 35 d1 00 ff ff ff ef 00 03:13:56.392 WRITE DMA EXT 35 d1 a0 ff ff ff ef 00 03:13:56.389 WRITE DMA EXT SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. == ============================================================================