eroz

It's been a while since I have updated my server (or visited the forums for that matter) besides swapping out hard drives. My current server consists of: Case - Antec Nine Hundred with 4 Norco SS-500 hot swap drive cages Motherboard - ASRock Z170 Extreme7+ Version CPU - i7-6700K with Corsair H60 cooler Ram - 16 GiB DDR4 Old SAS card (forgot the name but has Marvell) I'm looking at the following parts: CPU - i7-12700K - Core i7 12th Gen Alder Lake Motherboard - MSI PRO Z690-P Ram - CORSAIR Vengeance LPX 64GB (2 x 32GB) 288-Pin PC RAM DDR4 3200 (PC4 25600) Cooler - Thermaltake TH120 SAS card - looking into getting LSI SAS 9207-8i (1 right now but thinking about getting 2) Power Supply - CORSAIR RM850 I'm planning on re-using the case and the hot swap drive cages and hard drives (replacing those as I need). My main use is as a plex server and various *darr, homebridge, pihole dockers. I've dabbled with VM's so I still would like to have the option to do so. Honestly I don't have a budget but would like to keep total costs under $2k. Does it look ok or are there some changes I should make?

Hi. It's been awhile for me on the unraid forums. I use to manually find a book, download it and then update Calibre. I use to have a calibre server I ran from my windows machine but it has been years so no problem with starting fresh. I want to automate this and it seems I need to run the following; lazylibrarian-calibre, Calibre server, and calibreweb or cops. Is that correct? Is there a certain order I should run/install the dockers? Thanks!

my movies and tv shows get updated by the docker. Sent from my LG-H830 using Tapatalk

CD, what are you using to try to update your plex library?

I just let sonarr and couchpotato update the library after adding a movie or show.

Do you use Sonarr? If so are you using Drone Factory or Completed Download Handling for the file renaming? I was having the same issue and for a long time I also thought it was NzbGet. I switched from using the Drone Factory to Completed Download Handling and I have not had this issue anymore.

Are you able to able any other dockers? Is your server connected to the internet? have you tried pinging google to make sure?

It looks like that runs every hour and when it finds a movie or show then I get the following. Then it repeats hourly until it finds a new movie or show. Also I'm hoping you guys can add the dateutil module that trakt.tv needs per this post. Thanks! mariadb 10.1 branch with a lower version than 10.1.12 ? It might be.......Mariadb is the only dockers that I use that is not linuxserver. So the issue is with mariadb. Will it be as simple as switching to linuxserver docker to get rid of that error?

I've been noticing this on the kodi log from the Unraid Docker container page. It looks like that runs every hour and when it finds a movie or show then I get the following. Then it repeats hourly until it finds a new movie or show. Also I'm hoping you guys can add the dateutil module that trakt.tv needs per this post. Thanks!

Is your appdata share a cache only share? These are my settings. Everything is saved on the cache appdata share and not in the docker.img.

Did you update unRaid to 6.1.9? There is an update to dynamix webgui that fixes it. http://lime-technology.com/forum/index.php?topic=47185.0

Careful with calling it CLI Tools......

eroz, try this for your sensors.conf file and save on your flash drive. Since you are returning results from sensors -u coretemp-isa-0000, I am pretty sure it will work. /boot/config/sensors.conf # sensor configuration chip "coretemp-isa-0000" label temp1 "MB Temp" label temp2 "CPU Temp" Don't forget to add modprobe coretemp in your go file. Hope that helps, Gary Awesome! Thank you, That worked.

Missed all that since I had no output the first time. I get this root@Tower:~# sensors coretemp-isa-0000 Adapter: ISA adapter Physical id 0: +31.0 C (high = +80.0 C, crit = +100.0 C) Core 0: +29.0 C (high = +80.0 C, crit = +100.0 C) Core 1: +29.0 C (high = +80.0 C, crit = +100.0 C) Core 2: +31.0 C (high = +80.0 C, crit = +100.0 C) Core 3: +28.0 C (high = +80.0 C, crit = +100.0 C) nct6776-isa-0290 Adapter: ISA adapter Vcore: +0.88 V (min = +0.00 V, max = +1.74 V) in1: +1.85 V (min = +0.00 V, max = +0.00 V) ALARM AVCC: +3.34 V (min = +2.98 V, max = +3.63 V) +3.3V: +3.34 V (min = +2.98 V, max = +3.63 V) in4: +0.90 V (min = +0.00 V, max = +0.00 V) ALARM in5: +1.69 V (min = +0.00 V, max = +0.00 V) ALARM in6: +0.80 V (min = +0.00 V, max = +0.00 V) ALARM 3VSB: +3.47 V (min = +2.98 V, max = +3.63 V) Vbat: +3.30 V (min = +2.70 V, max = +3.63 V) fan1: 0 RPM (min = 0 RPM) fan2: 1580 RPM (min = 0 RPM) fan3: 0 RPM (min = 0 RPM) fan4: 0 RPM (min = 0 RPM) fan5: 0 RPM (min = 0 RPM) SYSTIN: +31.0 C (high = +0.0 C, hyst = +0.0 C) ALARM sensor = thermistor CPUTIN: +40.5 C (high = +80.0 C, hyst = +75.0 C) sensor = thermistor AUXTIN: +36.0 C (high = +80.0 C, hyst = +75.0 C) sensor = thermistor PECI Agent 0: +31.0 C (high = +80.0 C, hyst = +75.0 C) (crit = +100.0 C) PCH_CHIP_TEMP: +0.0 C PCH_CPU_TEMP: +0.0 C PCH_MCH_TEMP: +0.0 C intrusion0: ALARM intrusion1: ALARM beep_enable: disabled I'm still not sure what my sensors are? This is what I get for labels root@Tower:~# sensors -u coretemp-isa-0000 coretemp-isa-0000 Adapter: ISA adapter Physical id 0: temp1_input: 31.000 temp1_max: 80.000 temp1_crit: 100.000 temp1_crit_alarm: 0.000 Core 0: temp2_input: 28.000 temp2_max: 80.000 temp2_crit: 100.000 temp2_crit_alarm: 0.000 Core 1: temp3_input: 27.000 temp3_max: 80.000 temp3_crit: 100.000 temp3_crit_alarm: 0.000 Core 2: temp4_input: 31.000 temp4_max: 80.000 temp4_crit: 100.000 temp4_crit_alarm: 0.000 Core 3: temp5_input: 30.000 temp5_max: 80.000 temp5_crit: 100.000 temp5_crit_alarm: 0.000 so can I use this for my sensors.cfg # lines starting with "#" are comments and ignored # sensor configuration chip "nct6775-isa-0290" label temp1 "MB Temp" label temp2 "CPU 1 Temp" label temp3 "CPU 2 Temp" label temp4 "CPU 3 Temp" label temp5 "CPU 4 Temp"

trying to setup my sensors.cfg, This is what I have in it, #modprobe for each sensor modprobe nct6775 modprobe <sensor2> modprobe <sensor3> Not sure what <Sensor2> and <sensor3> should actually be?