timethrow

Would it be possible to open all external hyperlinks in a new Tab? For example, I was installing a Docker Container and in the Overview section of the Add Container Page, it had a link to the Docs on GitHub, I clicked on the link and it took me from my unRAID Page to the Git Hub page, ideally, it would open up in a new tab so I can stay on my unRAID page and refer to the docs as well. - I know I can right click and open in a new tab, but I think for external links, this should probably be the default behavior?

Hi, I have pretty much reached the limits of my current build in terms of the number of drives it can hold within the case, and have now got several connect via USB (eek!) and so I want to expand my setup further. I'm quite limited due to my MB, but I have found the QNAP TL-D1600S Expansion DAS online and it looks like this would suit my needs perfectly and allow me to expand with room to spare. It looks like a great enclosure and connects simply to a RAID Card, which they provide along with Cables (SFF-8088). As far as I can tell it looks like it supports JBOD out the box as well. So I am wondering if this would work with unRAID, if I were to add the Card it comes with (its looks like a regular 8 Port SAS Card) to my existing setup, and the attach the DAS with the SFF-8088 and add a few drives, it should then work? I dont have any other QNAP products so am hoping it does not have to be linked with one. Has anyone got any experience with this, or done something similar? Likewise, does anyone have any thoughts on a setup like this? Link to the Product; https://www.amazon.co.uk/QNAP-TL-D1600S-Desktop-Storage-Enclosure/dp/B084Q3DGTD Thanks

Thanks for that, it has worked. The Data Drive shows as being Emulated and the contents look to be what I would expect, and the emulated files are accessible. The Data Drive is being rebuilt now. Thank you for your help.

Thanks for that. The Original Parity was 10TB and its been replaced with a 14TB drive, which could be some reason for the 30+ hours. Surely, as everything has been copied over and the array has not been able to be started since, there must be some way to "force" it back into the state, as all the data is still there and nothing has changed, its just the unRAID GUI being restrictive. Are you able to provide some info on the Invalid Slot Command please, I might give that a go if I dont get any other results.

Hi, I have been following the Parity Swap Procedure here (https://wiki.unraid.net/The_parity_swap_procedure) and got to Step 14, I have let it copy the data from the old Parity drive to the new one and it completed fine. I came back to it after it completed and it was prompting for the password to start the array (and subsequently start the rebuild of data from parity), I was about to enter it but accidentally refreshed the page, now its asking me to do the whole parity copy again (both drives show a blue icon and say New Device). How do I get it back to the previous state where it knows that the new Drive has had the Parity copied to it, so I dont have to spend another 30+ hours letting it copy over, and that the drive it was swapped with needs rebuilding when the array starts? Thanks.

Is it possible to add keychain to this please?

Hi, I dont often have to shut down my server, but lately have had to do so for a few reasons, including once to update to 6.8.3. Since then, everytime I do shutdown my server (I do this via the GUI (After shutting down my VMs and Docker Containers from the UI) and just let it do its thing), it always comes back up and says that an unclean shutdown was detected, the first few times I just let it run the parity check thinking something may have happened, but no parity errors were found. However it keeps happening and I did it again the other day, and watched it shutdown safely, and it still insists it was not shutdown cleanly, this time I have canceled the parity check. I need to replace one of the Disks in my Array and so I need to shut it down, and the idea is to let it rebuild once the new disk is in, but given that it thinks there are errors with the Shutdown and potentially the parity not being correct. I don't want to do this just yet. Attached are my diagnostics (Disk 3 is the one to be Replaced, so I am aware of the SMART issues on it). Also worth mentioning (but could be unrelated) the last 2 shutdowns, I have seen random Docker Containers disappear, and need to be manually installed again from the (CA) Apps Tab. Any help would be greatly appreciated. Thanks! tower-diagnostics-20200522-1332.zip

In Fix Common Problems, I keep getting the following Warnings, I tried the fixes available for both, but it continues to show. Does anyone else get this?

Upgraded from 6.8.0 to 6.8.2 and upgrade largely went fine, although it reported an "Unclean Shutdown" even though, I just selected the Reboot option as I did with other releases? But besides that, so far, so good.

Have been using this for a few weeks but a couple of issues with it. 1) I dont seem to be able to CTRL + SHIFT Select items, for exmaple if I have 100 items, I have to CTRL and Click each item. 2) The WEB UI is very small and does not resize (even with auto scale) meaning I only see a few rows of each section at a time, is there anyway to change any of this?