Aviv

Members
  • Posts

    27
  • Joined

  • Last visited

Everything posted by Aviv

  1. What can happen if i upgrade and i did not installed the plugin?
  2. Hello! For Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 03) Should I / Must I install a driver? if yes which one from the community apps? Thank you
  3. Hi! As it seems goCoax MoCA 2.5 are no longer available on Amazon 😞 , did anyone had luck combining goCoax MoCA 2.5 adapters with ScreenBeam MoCA 2.5 adapters and can share from his experience? Thanks
  4. After upgrading to 6.12.6, I cant access my vm by clicking on VM console(VNC) from the vm unraid GUI - It says "no connection". Edit: Its working for me only if i access the vnc via incognito. Any tips? Thanks
  5. Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 03) should i upgrade the unraid version?
  6. Same issue here, cant connect - unknown error - i think its related to crashplan client itself as im not using the docker.
  7. Reboot solved it. Not sure why it happen. any ideas from your experience?
  8. When im trying to start a vm, i receive this error: " Cannot get interface MTU on 'virbr0': No such device" It seems my virbr0 interface has gone away? Any tips? 🙂 Thank you!
  9. i unplug and re-plug the sata + power cable and it seems good now. will take a close look on this one for few days
  10. Ok, so it seems the cache drive is now undetectable 😞 Trying to replace cable. wish me luck.
  11. Tried. Now im receiving this error: "Phase 1 - find and verify superblock... Phase 2 - using internal log - zero log... ALERT: The filesystem has valuable metadata changes in a log which is being destroyed because the -L option was used. Invalid block length (0x0) for buffer Log inconsistent (didn't find previous header) empty log check failed fatal error -- failed to clear log" I did a second try and receive this: hase 1 - find and verify superblock... Phase 2 - using internal log - zero log... Invalid block length (0x0) for buffer Log inconsistent (didn't find previous header) empty log check failed zero_log: cannot find log head/tail (xlog_find_tail=5) - scan filesystem freespace and inode maps... sb_fdblocks 79152746, counted 80012186 - found root inode chunk Phase 3 - for each AG... - scan and clear agi unlinked lists... - process known inodes and perform inode discovery... - agno = 0 - agno = 1 - agno = 2 - agno = 3 - process newly discovered inodes... Phase 4 - check for duplicate blocks... - setting up duplicate extent list... - check for inodes claiming duplicate blocks... - agno = 1 - agno = 2 - agno = 0 - agno = 3 Phase 5 - rebuild AG headers and trees... - reset superblock... Phase 6 - check inode connectivity... - resetting contents of realtime bitmap and summary inodes - traversing filesystem ... - traversal finished ... - moving disconnected inodes to lost+found ... Phase 7 - verify and correct link counts... Maximum metadata LSN (51:10387) is ahead of log (1:2). Format log to cycle 54. done. Now im able to mount. I dont see any folder called "Lost+found". what does that mean?
  12. Thank you, I tried to run it with no 'n' param and receive this error: "Phase 1 - find and verify superblock... Phase 2 - using internal log - zero log... ERROR: The filesystem has valuable metadata changes in a log which needs to be replayed. Mount the filesystem to replay the log, and unmount it before re-running xfs_repair. If you are unable to mount the filesystem, then use the -L option to destroy the log and attempt a repair. Note that destroying the log may cause corruption -- please attempt a mount of the filesystem before doing this." Just to make sure, should I run it now with the -L option or there is a better option? Thank you again for your kind help.
  13. Hi, My cache drive is suddenly saying: "Unmountable: No file system" Im using XFS (Encrypted). I run Extended offline smart test on the cache and it pass. I have data on the cache drive (vms, plex , and some data) so i cant just reformat it. Any tips? 😞 Thank you 🙂 --- Phase 1 - find and verify superblock... Phase 2 - using internal log - zero log... ALERT: The filesystem has valuable metadata changes in a log which is being ignored because the -n option was used. Expect spurious inconsistencies which may be resolved by first mounting the filesystem to replay the log. - scan filesystem freespace and inode maps... sb_fdblocks 79152746, counted 80012186 - found root inode chunk Phase 3 - for each AG... - scan (but don't clear) agi unlinked lists... - process known inodes and perform inode discovery... - agno = 0 - agno = 1 - agno = 2 - agno = 3 - process newly discovered inodes... Phase 4 - check for duplicate blocks... - setting up duplicate extent list... - check for inodes claiming duplicate blocks... - agno = 1 - agno = 0 - agno = 2 - agno = 3 No modify flag set, skipping phase 5 Phase 6 - check inode connectivity... - traversing filesystem ... - traversal finished ... - moving disconnected inodes to lost+found ... Phase 7 - verify link counts... Maximum metadata LSN (51:10362) is ahead of log (51:9849). Would format log to cycle 54. No modify flag set, skipping filesystem flush and exiting. fatty-diagnostics-20200603-1543.zip
  14. I love the ability to mix different kind/sizes of hard drives. Would love to see vm snapshots + vm backup option. :-)
  15. I have a brand new WD Blue ssd (500gb), since beginning smart shows 231 Total bad blocks. the value did not changed after 3 days. Is this normal? Anyone using WD blue SSD?
  16. Worked for me just now 🙂 Same as @Dabbner was saying, double :: applied to my situation.
  17. How is your experience with ST8000NM0055? They currently sells even cheaper comparing to ironwolf 8tb & ironwolf pro 8tb
  18. 56MiB/s is about 469.8 Mbps. my ssd model supports Sequential Write (up to) 350MB/s (SanDisk_SSD_PLUS_240GB). So i think im good. but still not sure i get the numbers right.
  19. Sorry, im new at this:) Updated my post. im getting 56MIB/s. I think its ok. as this is the speed of a sata ssd.
  20. I believe i got it all wrong.. The transfer speed show from my linux machine is in MiB's, eg I believe that 56MiB's is about 400Mbps. so, my bad. all good. right?
  21. How do I hide the encryption key from the diagnostics report?