Coque

Hello. How can i setup my PostgreSQL database using the unRAID template? I have created the variables (DB_TYPE, DB_HOST, etc.) from the unRAID GUI, but table aren't created? Any help? Thanks. PS: I haven't found tutorial or documentation...

After your suggestion I checked the wiring (although everything seemed to be well connected) and now all the disks do appear in the pool. I have been having hardware reboots for a while (despite having a 750W power supply, connecting so many disks on each line was causing me problems) and now that I seemed to have the system stable, I had noticed that the pool had degraded due to the lack of a disk. Now everything seems to be fine. I am going to run a Scrub to verify that everything is ok. Thank you very much for putting me on the track JorgeB! 😘

Sorry... I hadn't read the whole message. I will check the cables for that drive. Sorry about that.

Hi. I have stopped Docker Authentik, as it was indeed constantly restarting. Attached is the Diagnostic. Thank you. midiam.local-diagnostics-20241001-1319.zip

Good afternoon. After a series of reboots due to a hardware instability issue that I have already fixed, I found one of my ZPool marked as degraded. I am attaching my diagnosis in case someone could help me to get that Pool back to correct. Thank you very much. midiam.local-diagnostics-20241001-1204.zip

¿Qué quieres montar? Yo estoy usando CloudFlare + NPM + Authentik para dar acceso a alguna aplicación de escritorio que no tiene sistema de autenticación. No sé si te serviría mi experiencia, que no es mucha, pero he podido echarlo a andar más o menos (me quedan algunas cosillas)

Hello, JorgeB. I have done everything as you told me. I exported the zpool, checked that the disks were correctly assigned and, just in case, I restarted the server to mount the array + containers. And everything is working as usual. I am hugely grateful for your time and help. PS: Do you have a Patreon or Paypal to pay for a coffee or a beer?

Good morning. The resilvering process of the pool called tycho has finished. state: ONLINE scan: resilvered 15.6T in 1 days 13:18:09 with 0 errors on Sun Sep 8 01:04:29 2024 config: NAME STATE READ WRITE CKSUM tycho ONLINE 0 0 0 raidz1-0 ONLINE 0 0 0 sdk1 ONLINE 0 0 0 sdl1 ONLINE 0 0 0 sdm1 ONLINE 0 0 0 sdn1 ONLINE 0 0 0 sdo1 ONLINE 0 0 0 sdp1 ONLINE 0 0 0 errors: No known data errors What's the next step? Can i start the arrays through the GUI or i need to test anything else?

Hello. It's resilvering the disk pool: tycho state: DEGRADED status: One or more devices is currently being resilvered. The pool will continue to function, possibly in a degraded state. action: Wait for the resilver to complete. scan: resilver in progress since Fri Sep 6 11:46:20 2024 380G scanned at 25.3G/s, 54.3M issued at 3.62M/s, 93.3T total 0B resilvered, 0.00% done, no estimated completion time config: NAME STATE READ WRITE CKSUM tycho DEGRADED 0 0 0 raidz1-0 DEGRADED 0 0 0 replacing-0 DEGRADED 0 0 0 13502292040317525666 FAULTED 0 0 0 was /dev/sdm1 sdk1 ONLINE 0 0 0 sdl1 ONLINE 0 0 0 sdm1 ONLINE 0 0 0 sdn1 ONLINE 0 0 0 sdo1 ONLINE 0 0 0 sdp1 ONLINE 0 0 0 errors: No known data errors I'll wait for it to finish and update you. Thank you very much! PS: Crossfinger.

Here it is. pool: tycho state: DEGRADED status: One or more devices could not be used because the label is missing or invalid. Sufficient replicas exist for the pool to continue functioning in a degraded state. action: Replace the device using 'zpool replace'. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-4J scan: scrub repaired 0B in 1 days 04:14:46 with 0 errors on Tue Sep 3 13:37:36 2024 config: NAME STATE READ WRITE CKSUM tycho DEGRADED 0 0 0 raidz1-0 DEGRADED 0 0 0 13502292040317525666 FAULTED 0 0 0 was /dev/sdm1 sdl1 ONLINE 0 0 0 sdm1 ONLINE 0 0 0 sdn1 ONLINE 0 0 0 sdo1 ONLINE 0 0 0 sdp1 ONLINE 0 0 0 errors: No known data errors It says there is a disk in FAULTED state. Thanks!

Hi, JorgeB. The task has been successfully completed. pool: rocinante state: ONLINE scan: resilvered 13.1T in 1 days 03:56:38 with 0 errors on Fri Sep 6 03:46:49 2024 config: NAME STATE READ WRITE CKSUM rocinante ONLINE 0 0 0 raidz1-0 ONLINE 0 0 0 sdc1 ONLINE 0 0 0 sde1 ONLINE 0 0 0 sdh1 ONLINE 0 0 0 sdd1 ONLINE 0 0 0 sdf1 ONLINE 0 0 0 sdg1 ONLINE 0 0 0 errors: No known data errors What would be the next step to try to recover the tycho pool? Thank you!

This GUI screenshot shows the current pool allocation I have. From the GUI I see everything correct. Shall I proceed with what you have indicated? PS: Indeed... All the disks in the Rocinante pool must be 18 TB.

Here it is... midiam.local-diagnostics-20240904-2224.zip

This is one of the doubts I have had during this whole process. I created the pool using the ZFS Master plugin and I have assigned the drives using the HDD IDs/SERIAL NUMBER as a reference. This screenshot shows the drive names they had originally and now they are mapped in the same order. The names of the drives have changed as a result of all this problem. I attach a screenshot of the mapping I did from the GUI in case it is useful. PS: I think that drive is the one that was originally in that pool (based on the serial number of the disks).

Seems OK. pool: tycho id: 10901411189181231896 state: DEGRADED status: One or more devices contains corrupted data. action: The pool can be imported despite missing or damaged devices. The fault tolerance of the pool may be compromised if imported. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-4J config: tycho DEGRADED raidz1-0 DEGRADED 13502292040317525666 FAULTED corrupted data sdl1 ONLINE sdm1 ONLINE sdn1 ONLINE sdo1 ONLINE sdp1 ONLINE pool: donnager id: 16552885184057344388 state: ONLINE action: The pool can be imported using its name or numeric identifier. config: donnager ONLINE raidz1-0 ONLINE sdi1 ONLINE sdj1 ONLINE sdr1 ONLINE sdq1 ONLINE sds1 ONLINE sdt1 ONLINE pool: rocinante id: 5924509355974799305 state: ONLINE action: The pool can be imported using its name or numeric identifier. config: rocinante ONLINE raidz1-0 ONLINE sdk1 ONLINE sde1 ONLINE sdh1 ONLINE sdd1 ONLINE sdf1 ONLINE sdg1 ONLINE pool: disk1 id: 8733512297879271467 state: ONLINE action: The pool can be imported using its name or numeric identifier. config: disk1 ONLINE sda1 ONLINE pool: cache id: 3766673087186651326 state: ONLINE action: The pool can be imported using its name or numeric identifier. config: cache ONLINE nvme0n1p1 ONLINE