Coque

Hello. How can i setup my PostgreSQL database using the unRAID template? I have created the variables (DB_TYPE, DB_HOST, etc.) from the unRAID GUI, but table aren't created? Any help? Thanks. PS: I haven't found tutorial or documentation...

After your suggestion I checked the wiring (although everything seemed to be well connected) and now all the disks do appear in the pool. I have been having hardware reboots for a while (despite having a 750W power supply, connecting so many disks on each line was causing me problems) and now that I seemed to have the system stable, I had noticed that the pool had degraded due to the lack of a disk. Now everything seems to be fine. I am going to run a Scrub to verify that everything is ok. Thank you very much for putting me on the track JorgeB! 😘

Sorry... I hadn't read the whole message. I will check the cables for that drive. Sorry about that.

Hi. I have stopped Docker Authentik, as it was indeed constantly restarting. Attached is the Diagnostic. Thank you. midiam.local-diagnostics-20241001-1319.zip

Good afternoon. After a series of reboots due to a hardware instability issue that I have already fixed, I found one of my ZPool marked as degraded. I am attaching my diagnosis in case someone could help me to get that Pool back to correct. Thank you very much. midiam.local-diagnostics-20241001-1204.zip

¿Qué quieres montar? Yo estoy usando CloudFlare + NPM + Authentik para dar acceso a alguna aplicación de escritorio que no tiene sistema de autenticación. No sé si te serviría mi experiencia, que no es mucha, pero he podido echarlo a andar más o menos (me quedan algunas cosillas)

Hello, JorgeB. I have done everything as you told me. I exported the zpool, checked that the disks were correctly assigned and, just in case, I restarted the server to mount the array + containers. And everything is working as usual. I am hugely grateful for your time and help. PS: Do you have a Patreon or Paypal to pay for a coffee or a beer?

Good morning. The resilvering process of the pool called tycho has finished. state: ONLINE scan: resilvered 15.6T in 1 days 13:18:09 with 0 errors on Sun Sep 8 01:04:29 2024 config: NAME STATE READ WRITE CKSUM tycho ONLINE 0 0 0 raidz1-0 ONLINE 0 0 0 sdk1 ONLINE 0 0 0 sdl1 ONLINE 0 0 0 sdm1 ONLINE 0 0 0 sdn1 ONLINE 0 0 0 sdo1 ONLINE 0 0 0 sdp1 ONLINE 0 0 0 errors: No known data errors What's the next step? Can i start the arrays through the GUI or i need to test anything else?

Hello. It's resilvering the disk pool: tycho state: DEGRADED status: One or more devices is currently being resilvered. The pool will continue to function, possibly in a degraded state. action: Wait for the resilver to complete. scan: resilver in progress since Fri Sep 6 11:46:20 2024 380G scanned at 25.3G/s, 54.3M issued at 3.62M/s, 93.3T total 0B resilvered, 0.00% done, no estimated completion time config: NAME STATE READ WRITE CKSUM tycho DEGRADED 0 0 0 raidz1-0 DEGRADED 0 0 0 replacing-0 DEGRADED 0 0 0 13502292040317525666 FAULTED 0 0 0 was /dev/sdm1 sdk1 ONLINE 0 0 0 sdl1 ONLINE 0 0 0 sdm1 ONLINE 0 0 0 sdn1 ONLINE 0 0 0 sdo1 ONLINE 0 0 0 sdp1 ONLINE 0 0 0 errors: No known data errors I'll wait for it to finish and update you. Thank you very much! PS: Crossfinger.

Here it is. pool: tycho state: DEGRADED status: One or more devices could not be used because the label is missing or invalid. Sufficient replicas exist for the pool to continue functioning in a degraded state. action: Replace the device using 'zpool replace'. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-4J scan: scrub repaired 0B in 1 days 04:14:46 with 0 errors on Tue Sep 3 13:37:36 2024 config: NAME STATE READ WRITE CKSUM tycho DEGRADED 0 0 0 raidz1-0 DEGRADED 0 0 0 13502292040317525666 FAULTED 0 0 0 was /dev/sdm1 sdl1 ONLINE 0 0 0 sdm1 ONLINE 0 0 0 sdn1 ONLINE 0 0 0 sdo1 ONLINE 0 0 0 sdp1 ONLINE 0 0 0 errors: No known data errors It says there is a disk in FAULTED state. Thanks!

Hi, JorgeB. The task has been successfully completed. pool: rocinante state: ONLINE scan: resilvered 13.1T in 1 days 03:56:38 with 0 errors on Fri Sep 6 03:46:49 2024 config: NAME STATE READ WRITE CKSUM rocinante ONLINE 0 0 0 raidz1-0 ONLINE 0 0 0 sdc1 ONLINE 0 0 0 sde1 ONLINE 0 0 0 sdh1 ONLINE 0 0 0 sdd1 ONLINE 0 0 0 sdf1 ONLINE 0 0 0 sdg1 ONLINE 0 0 0 errors: No known data errors What would be the next step to try to recover the tycho pool? Thank you!

This GUI screenshot shows the current pool allocation I have. From the GUI I see everything correct. Shall I proceed with what you have indicated? PS: Indeed... All the disks in the Rocinante pool must be 18 TB.

Here it is... midiam.local-diagnostics-20240904-2224.zip

This is one of the doubts I have had during this whole process. I created the pool using the ZFS Master plugin and I have assigned the drives using the HDD IDs/SERIAL NUMBER as a reference. This screenshot shows the drive names they had originally and now they are mapped in the same order. The names of the drives have changed as a result of all this problem. I attach a screenshot of the mapping I did from the GUI in case it is useful. PS: I think that drive is the one that was originally in that pool (based on the serial number of the disks).

Seems OK. pool: tycho id: 10901411189181231896 state: DEGRADED status: One or more devices contains corrupted data. action: The pool can be imported despite missing or damaged devices. The fault tolerance of the pool may be compromised if imported. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-4J config: tycho DEGRADED raidz1-0 DEGRADED 13502292040317525666 FAULTED corrupted data sdl1 ONLINE sdm1 ONLINE sdn1 ONLINE sdo1 ONLINE sdp1 ONLINE pool: donnager id: 16552885184057344388 state: ONLINE action: The pool can be imported using its name or numeric identifier. config: donnager ONLINE raidz1-0 ONLINE sdi1 ONLINE sdj1 ONLINE sdr1 ONLINE sdq1 ONLINE sds1 ONLINE sdt1 ONLINE pool: rocinante id: 5924509355974799305 state: ONLINE action: The pool can be imported using its name or numeric identifier. config: rocinante ONLINE raidz1-0 ONLINE sdk1 ONLINE sde1 ONLINE sdh1 ONLINE sdd1 ONLINE sdf1 ONLINE sdg1 ONLINE pool: disk1 id: 8733512297879271467 state: ONLINE action: The pool can be imported using its name or numeric identifier. config: disk1 ONLINE sda1 ONLINE pool: cache id: 3766673087186651326 state: ONLINE action: The pool can be imported using its name or numeric identifier. config: cache ONLINE nvme0n1p1 ONLINE

I have fixed the export command by zpool export tycho, since it was telling me that when exporting I had to indicate a name starting with a letter. Then I have put zpool import 5924509355974799305 rocinante and everything has been mounted correctly. What would be the next step to mount the remaining pool (tycho)? Thanks!

Yes. The name of the zpool is wrong and is pointing to rocinante mounting point. Is it possible rename the pool?

I have obfuscated the name of the folders because some of them have sensitive names.

The name is wrong, because the content inside belongs to rocinante, but seems well mounted. pool: tycho state: ONLINE scan: resilvered 12.9T in 1 days 19:11:37 with 0 errors on Wed Sep 4 04:23:27 2024 config: NAME STATE READ WRITE CKSUM tycho ONLINE 0 0 0 raidz1-0 ONLINE 0 0 0 sdk1 ONLINE 0 0 0 sde1 ONLINE 0 0 0 sdh1 ONLINE 0 0 0 sdd1 ONLINE 0 0 0 sdf1 ONLINE 0 0 0 sdg1 ONLINE 0 0 0 errors: No known data errors Following step?

This is the new zpool import without starting the pool on reboot pool: tycho id: 10901411189181231896 state: DEGRADED status: One or more devices contains corrupted data. action: The pool can be imported despite missing or damaged devices. The fault tolerance of the pool may be compromised if imported. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-4J config: tycho DEGRADED raidz1-0 DEGRADED 13502292040317525666 FAULTED corrupted data sdl1 ONLINE sdm1 ONLINE sdn1 ONLINE sdo1 ONLINE sdp1 ONLINE pool: donnager id: 16552885184057344388 state: ONLINE action: The pool can be imported using its name or numeric identifier. config: donnager ONLINE raidz1-0 ONLINE sdi1 ONLINE sdj1 ONLINE sdr1 ONLINE sdq1 ONLINE sds1 ONLINE sdt1 ONLINE pool: disk1 id: 8733512297879271467 state: ONLINE action: The pool can be imported using its name or numeric identifier. config: disk1 ONLINE sda1 ONLINE pool: tycho id: 5924509355974799305 state: ONLINE action: The pool can be imported using its name or numeric identifier. config: tycho ONLINE raidz1-0 ONLINE sdk1 ONLINE sde1 ONLINE sdh1 ONLINE sdd1 ONLINE sdf1 ONLINE sdg1 ONLINE pool: cache id: 3766673087186651326 state: ONLINE action: The pool can be imported using its name or numeric identifier. config: cache ONLINE nvme0n1p1 ONLINE

Here is the new zpool import after deleting the devices you mentioned: pool: donnager id: 16552885184057344388 state: ONLINE action: The pool can be imported using its name or numeric identifier. config: donnager ONLINE raidz1-0 ONLINE sdi1 ONLINE sdj1 ONLINE sdr1 ONLINE sdq1 ONLINE sds1 ONLINE sdt1 ONLINE pool: tycho id: 5924509355974799305 state: DEGRADED status: One or more devices contains corrupted data. action: The pool can be imported despite missing or damaged devices. The fault tolerance of the pool may be compromised if imported. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-4J config: tycho DEGRADED raidz1-0 DEGRADED sdl1 UNAVAIL sde1 ONLINE sdh1 ONLINE sdd1 ONLINE sdf1 ONLINE sdg1 ONLINE pool: disk1 id: 8733512297879271467 state: ONLINE action: The pool can be imported using its name or numeric identifier. config: disk1 ONLINE sda1 ONLINE pool: cache id: 3766673087186651326 state: ONLINE action: The pool can be imported using its name or numeric identifier. config: cache ONLINE nvme0n1p1 ONLINE

I hadn't mentioned that now i've the array stopped.

This is the result: pool: tycho id: 10901411189181231896 state: DEGRADED status: One or more devices contains corrupted data. action: The pool can be imported despite missing or damaged devices. The fault tolerance of the pool may be compromised if imported. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-4J config: tycho DEGRADED raidz1-0 DEGRADED 13502292040317525666 FAULTED corrupted data sdk1 ONLINE sdm1 ONLINE sdn1 ONLINE sdo1 ONLINE sdp1 ONLINE pool: donnager id: 16552885184057344388 state: ONLINE action: The pool can be imported using its name or numeric identifier. config: donnager ONLINE raidz1-0 ONLINE sdi1 ONLINE sdj1 ONLINE sdr1 ONLINE sdq1 ONLINE sds1 ONLINE sdt1 ONLINE pool: tycho id: 5924509355974799305 state: DEGRADED status: One or more devices contains corrupted data. action: The pool can be imported despite missing or damaged devices. The fault tolerance of the pool may be compromised if imported. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-4J config: tycho DEGRADED raidz1-0 DEGRADED sdl1 UNAVAIL sde1 ONLINE sdh1 ONLINE sdd1 ONLINE sdf1 ONLINE sdg1 ONLINE pool: disk1 id: 8733512297879271467 state: ONLINE action: The pool can be imported using its name or numeric identifier. config: disk1 ONLINE sda1 ONLINE pool: cache id: 3766673087186651326 state: ONLINE action: The pool can be imported using its name or numeric identifier. config: cache ONLINE nvme0n1p1 ONLINE sdl1 sais that unavailable, but the disk in tycho still sais 13502292040317525666 FAULTED corrupted data

Sorry for the inconvenience. Here it is the zpool import: pool: tycho id: 10901411189181231896 state: DEGRADED status: One or more devices contains corrupted data. action: The pool can be imported despite missing or damaged devices. The fault tolerance of the pool may be compromised if imported. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-4J config: tycho DEGRADED raidz1-0 DEGRADED 13502292040317525666 FAULTED corrupted data sdk1 ONLINE sdm1 ONLINE sdn1 ONLINE sdo1 ONLINE sdp1 ONLINE pool: donnager id: 16552885184057344388 state: ONLINE action: The pool can be imported using its name or numeric identifier. config: donnager ONLINE raidz1-0 ONLINE sdi1 ONLINE sdj1 ONLINE sdr1 ONLINE sdq1 ONLINE sds1 ONLINE sdt1 ONLINE pool: tycho id: 5924509355974799305 state: ONLINE action: The pool can be imported using its name or numeric identifier. config: tycho ONLINE raidz1-0 ONLINE sdl1 ONLINE sde1 ONLINE sdh1 ONLINE sdd1 ONLINE sdf1 ONLINE sdg1 ONLINE pool: disk1 id: 8733512297879271467 state: ONLINE action: The pool can be imported using its name or numeric identifier. config: disk1 ONLINE sda1 ONLINE pool: cache id: 3766673087186651326 state: ONLINE action: The pool can be imported using its name or numeric identifier. config: cache ONLINE nvme0n1p1 ONLINE Thanks again.

After deleting the missing cache disk with the command you indicated, I have reassigned again the disks to each of the pools and now it tells me that the pool is unmountable and the option it gives me is to format it all... T_T I don't know if it can be mounted by hand from the CLI somehow? I send the current logs (I have configured unRAID so that it does not launch docker and can interfere with something) Any suggestions? Thanks! PS: I think I'm going to cry.... midiam.local-diagnostics-20240904-1637.zip