sf0709 Posted December 27, 2020 Share Posted December 27, 2020 I'm pretty new to the unraid world. I set up my nas earlier in the month, ASUS b550m-plus, Ryzen 3600, Gskill ddr4 3600, NVidia rtx4000, intel p3600 cache SSD, and a lsi-9207-8i. I am currently running unraid 6.9.0-rc1. my issue is that I have 4 Seagate 8tb ironwolfs that have been installed onto my mobo, and just installed 4 more Seagate Exos 10tb, but when the hba and the hdds together my nas no longer sees any of the hdds on the system, but when I go to system devices it sees an attached scsi contoller: Broadcom / LSI SAS2308 PCI-Express Fusion-MPT SAS-2 (rev05). my question is what do I need to do to get my hdds online again so that I can get my stuff? Quote Link to comment
trurl Posted December 27, 2020 Share Posted December 27, 2020 Go to Tools - Diagnostics and attach the complete Diagnostics ZIP file to your NEXT post in this thread. Quote Link to comment
sf0709 Posted December 27, 2020 Author Share Posted December 27, 2020 tower-diagnostics-20201226-1909.zip Quote Link to comment
JorgeB Posted December 27, 2020 Share Posted December 27, 2020 HBA is failing to initialize: Dec 26 17:59:26 Tower kernel: mpt2sas_cm0: diag reset: SUCCESS Dec 26 17:59:26 Tower kernel: mpt2sas_cm0: _base_spin_on_doorbell_int: failed due to timeout count(10000), int_status(c0000000)! Dec 26 17:59:26 Tower kernel: mpt2sas_cm0: doorbell handshake int failed (line=5916) Dec 26 17:59:26 Tower kernel: mpt2sas_cm0: _base_get_ioc_facts: handshake failed (r=-14) Dec 26 17:59:26 Tower kernel: mpt2sas_cm0: failure at drivers/scsi/mpt3sas/mpt3sas_scsih.c:10790/_scsih_probe()! Try re-flashing it or testing in a different board if available. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.