High-Tower Posted February 3, 2021 Share Posted February 3, 2021 (edited) Hallo zusammen, bei mir ist der Wurm drin... Bekomme kein Internet für den Unraid Server, weis aber auch nicht so wirklich, woran das liegt (dadurch komme ich auch nicht mehr auf die Apps (Zeigt mir Fehler an): Download of appfeed failed. Community Applications requires your server to have internet access. The most common cause of this failure is a failure to resolve DNS addresses. You can try and reset your modem and router to fix this issue, or set static DNS addresses (Settings - Network Settings) of 208.67.222.222 and 208.67.220.220 and try again. Alternatively, there is also a chance that the server handling the application feed is temporarily down. Last JSON error Recorded: Syntax error Kurz zur vorgeschichte: Hab meinen "alten" Unraid Server gegen neue Komponenten getauscht (performantere). Hatte beim alten Server LA aktiviert (mit 2 Intel 1Gb NIC´s) und hat bis dahin tadellos funktioniert. Nun nach dem Umbau hat das Mainboard "nur" noch einen 1 Gbit NIC von Intel. Hab irgendwas komplett verstellt in den Network Settings, sodass ich mich dann entschloss die network.cfg und die network-rules.cfg zu löschen. Zwischenzeitlich ist dann auch die 10Gbit X520-DA2 Karte gekommen und diese hab ich direkt eingebaut (ist aber bis jetzt noch nicht aktiv, da die SFP+ Komponeneten noch nicht eingetroffen sind). Danach mit Bildschirm und Tastatur mit dem WebUI am Server direkt gestartet und das Netzwerk eingestellt. (Die beiden 10Gbit Anschlüsse sind "shutdown inactiv" und sind eingestellt auf eth1 und eth2). eth0 ist der 1Gbit Intel Nic. Die IP ist eingestellt, das Gateway und der DNS. Mein Problem ist nun, dass ich mit dem Server nicht mehr ins Internet komme. Über die Konsole kann ich einen erfolgreichen PING im Netzwerk aktive Teilnehmer ausführen. Ein Ping auf www.google.de (oder auch .com) kommt die Meldung: ping: connect: Network is unreachable ABER wenn ich einen traceroute ausführe, wird mir das angezeigt: traceroute to www.google.de (172.217.23.99), 30 hops max, 60 byte packets connect: Network is unreachable Füre ich dann einen Ping auf 172.217.23.99 aus, kommt wieder: ping: connect: Network is unreachable Der Port am Switch ist im richtigen VLAN eingetragen und funktioniert mit einem anderen angeschlossenen Gerät einwandfrei (Internetzugang). Bin mit meinem Latein am Ende. Kapier es nicht mehr, was denn nun noch falsch ist... PS: Boote im Legacy Modus (BIOS), was auch am Flash Drive eingestellt ist Anbei noch ein paar Bilder. PS: Hab das Bridging wieder eingeschalten, da ich diese für die VM´s benötige. Mit oder ohne bridging, es funktioniert kein Internet, aber nur auf Unraid ebene. Mit den VM´s funktioniert das Internet Problemlos. Danke schon mal im Voraus. Edited February 3, 2021 by High-Tower Quote Link to comment
Ford Prefect Posted February 3, 2021 Share Posted February 3, 2021 (edited) ...mach mal enable bridging = YES und nimm nur den eth0 in die Bridge auf Edit: Du hast nur die Route ins lokale Netz, keine Default Route...warum auch immer. Edit2: default Route manuell einbauen, unten in den Settings auf eth0: 0.0.0.0/0 GW: 192.168.201.1 Edited February 3, 2021 by Ford Prefect netzmake für die Default route deditiert 1 Quote Link to comment
High-Tower Posted February 3, 2021 Author Share Posted February 3, 2021 Hab das so nun eingetragen. Korrekt? Quote Link to comment
High-Tower Posted February 3, 2021 Author Share Posted February 3, 2021 Jippi... habs hinbekommen... Siehe Anhang 😃 Danke! Quote Link to comment
Ford Prefect Posted February 3, 2021 Share Posted February 3, 2021 (edited) ...genau...die default Route sollte da hin...hat unRaid das nun selbst erledigt, als Du die Bridge aktiviert hast? Zumindest war das meine Hoffnung.... Ansonsten, manuell musst Du 0.0.0.0./0 als IP verwenden, nicht 0.0.0.0 ohne Netzmaske. Edited February 3, 2021 by Ford Prefect Quote Link to comment
High-Tower Posted February 3, 2021 Author Share Posted February 3, 2021 Nein, hab es Manuell so eingetragen... Hat bestimmt damit zu tun, weil ich das System gewechselt hab und kein LA mehr hatte. Nun, wieder was dazu gelernt 😃 1 Quote Link to comment
Ford Prefect Posted February 3, 2021 Share Posted February 3, 2021 OK...die Bridge ist dafür zwar nicht entscheidend, aber für die Docker und VMs hilfreich....lass es also erstmal so Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.