Roma4593 Posted February 7, 2021 Share Posted February 7, 2021 Hello all I am a newer UNRAID user and new to the forum. I was hoping for some help - I now have krusader to facilitate LAN file transfers between my other backup UNRAID server as well as a WD PR4100 NAS. I have gigabit connection when transferring files within my UNRAID server via windows VM to and from the other devices as "network drives" however krusader SMB connection transfers over the exact same path and hardware are getting between 2-8Mib/s. Completely unusable. I hope someone can help. For networking I have asus RT AX92U over aimesh between my UNRAID server and other devices. Diagnostics are attached. halo-diagnostics-20210206-2115.zip Quote Link to comment
JorgeB Posted February 7, 2021 Share Posted February 7, 2021 Is it the same if you if transfer directly form Unraid to Unraid with rsync for example? Or even Windows? 1 Quote Link to comment
Roma4593 Posted February 7, 2021 Author Share Posted February 7, 2021 I get the full GB + speed when I transfer within a windows VM between the UNRAID machines when mapped as network drives. UNRAID server 1 -> windows vm -> UNRAID server 1 mapped network drive <----> UNRAID server 2 mapped network drive = 110+ MB/s using krusader SMB - UNRAID server 1 <-------> UNRAID server 2 = 2-8 Mib/s Very confusing why this would be the case. Same hardware paths. Quote Link to comment
JorgeB Posted February 8, 2021 Share Posted February 8, 2021 That suggests it's not an Unraid or network problem, but I never used krusader, so can't help with that. 1 Quote Link to comment
ChatNoir Posted February 8, 2021 Share Posted February 8, 2021 Did you try to make the same transfer with Midnight Commander ? (mc in the console) 1 Quote Link to comment
Roma4593 Posted February 8, 2021 Author Share Posted February 8, 2021 Thank you for your responses so far. I had not looked into MC. After learning about it, I managed to create a connection between my UNRAID server and my PR4100 and had the same slow speeds as with the krusader GUI! Photo attached. I would also receive an error when writing UNRAID -> PR4100 " Error ERRDOS - ERRbadpath creating directory \Public\Test\Books" for example - however transfer speed is still my biggest issue at the moment. best Quote Link to comment
Roma4593 Posted February 9, 2021 Author Share Posted February 9, 2021 I'm beginning to wonder if it is something with my network settings ie something wrong with my routing table. Unfortunately I know very little about networking and I am worried I would brick access to my unraid web UI. I've attached the noted speeds under interface as well as a screen of my network settings. Seems that bond0 is "fault-tolerance" eth0 is GB eth1 down? Please let me know if anyone has thoughts on this. Quote Link to comment
JorgeB Posted February 10, 2021 Share Posted February 10, 2021 If it works normally with Windows it shouldn't be network related, why not use Windows or rsync? 1 Quote Link to comment
Roma4593 Posted February 10, 2021 Author Share Posted February 10, 2021 Will probably stick with windows at this point. There are sync features in krusader that I wish I could take advantage of. I appreciate all of the help. Quote Link to comment
JorgeB Posted February 10, 2021 Share Posted February 10, 2021 If you need sync features in an easy to use way look for synback free for Windows. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.