007craft Posted March 7, 2021 Share Posted March 7, 2021 So Suddenly my unraid server became unreachable. I turned on the monitor connected to the tower and there was no display so I pushed the power button on the tower. It shut down after 5 minutes (Hopefully cleanly) and I restarted. Now when I start it it gets stuck on loading (In both regular and safe mode) at this line: vfio-pci 0000:08:00.0 vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem I do have a VM with video card passthrough enabled, but It was turned off, and its also set to off on autoboot (I hardly use it). What can I do to recover and get back into Unraid? Quote Link to comment
JorgeB Posted March 7, 2021 Share Posted March 7, 2021 Try deleting or renaming /config/vfio-pci.cfg 2 1 Quote Link to comment
007craft Posted March 8, 2021 Author Share Posted March 8, 2021 Thanks. I put the stick in my windows PC and deleted the file. It worked. I hope this doesn't happen every time I reboot if using a VM with a graphics passthrough. Quote Link to comment
ShortbreadUK Posted January 13, 2022 Share Posted January 13, 2022 On 3/7/2021 at 10:35 AM, JorgeB said: Try deleting or renaming /config/vfio-pci.cfg This fixed my issue too, thank you! Quote Link to comment
OmgImAlexis Posted January 24, 2022 Share Posted January 24, 2022 Just hit this myself from an unclean shutdown. Quote Link to comment
Jarvis Posted February 14, 2022 Share Posted February 14, 2022 On 3/7/2021 at 11:35 AM, JorgeB said: Try deleting or renaming /config/vfio-pci.cfg Or use SSH and MC to deleting or renaming /config/vfio-pci.cfg And then Reboot And thanks for the hit with renaming /config/vfio-pci.cfg Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.