OFark Posted July 26, 2021 Author Share Posted July 26, 2021 No worries, I have just pushed a new version that will allow you to choose if you want to copy subtitles or not, plus other data, attachments, metadata, as well as pick a different subtitle encoder. Note on that: be sure about the source files, FFmpeg cannot encode Text to bitmap or visa versa. If you are going to choose a subtitle encoder make sure all your source files can be encoded. Otherwise just choose copy. Quote Link to comment
AlexKoh Posted July 26, 2021 Share Posted July 26, 2021 I just reencoded using MKV for the container I choose mkvtimestamp_v2 as I couldn't find any mkv container. Is this suppose to be like that? Quote Link to comment
OFark Posted July 26, 2021 Author Share Posted July 26, 2021 4 minutes ago, AlexKoh said: I just reencoded using MKV for the container I choose mkvtimestamp_v2 as I couldn't find any mkv container. Is this suppose to be like that? No, the container is called Matroska. It's one of the most difficult things to wrap; Containers are ways of containing the data, but can have multiple extensions. And an extension could belong to different containers. So to get round that I have to ask for what container you want to use and then pick the first appropriate file extension. FFmpeg normally has the file extension as the name of the container, but not for Matroska, just to be difficult, it lists it as the full name. Quote Link to comment
AlexKoh Posted July 26, 2021 Share Posted July 26, 2021 ah i see will use matroska. I was assuming the MKV extension would be also name MKV container like how the MP4 was. Sorry about that will try again thanks for helping. Quote Link to comment
AlexKoh Posted July 27, 2021 Share Posted July 27, 2021 Thank you for the great support finally manage to get my files compressed! Yeah! Cheers~! Quote Link to comment
OFark Posted July 27, 2021 Author Share Posted July 27, 2021 And thank you for not giving up and helping me make improvements. Quote Link to comment
OFark Posted July 28, 2021 Author Share Posted July 28, 2021 Today Docker stopped supporting automated builds for free accounts. Apologies for any issues there may have been during a shift to Github action builds. Quote Link to comment
Nosirus Posted July 31, 2021 Share Posted July 31, 2021 Hello, I can't get them to communicate with radarr/sonarr with compressarr I use a url base but even without it I don't want to http://192.168.1.50:7878/radarr api key xxxx I get "NotFound- Not Found" should they be on the same interface? I am in bridge mode but with jackett radarr etc...I don't have any problem it does not pose a problem Quote Link to comment
OFark Posted July 31, 2021 Author Share Posted July 31, 2021 Hi, First off we need to check to see if the docker containers can see each other: Console to the Compressarr app and type the following in to install curl: apt-get install curl then once that's done type curl and then the url to Radarr/Sonarr so, and I'm guessing here but it looks like your might be: curl 192.168.1.50:7878/radarr This isn't going to work, because you'll need to authenticate, but it should return some HTML with an error message in it, rather than nothing or a "Could not resolve host" or a "Failed to connect to..." error. If it returns some successful HTML then I need you to change the logging to Debug, try again and then send me a copy of the logs, and a screenshot of the status of the connection shown when it tries to connect and fails. Obviously, blur out your API key. Quote Link to comment
Nosirus Posted August 2, 2021 Share Posted August 2, 2021 (edited) I found the problem, with your idea I could see the api link used and it's because I use radarr v4 and not v3 there seems to have been a change in their api now I have to understand why when I want to create a filter it does nothing and shows me "An error has occurred. This application may no longer respond until reloaded. Reload" 😅 Edited August 2, 2021 by Nosirus Quote Link to comment
OFark Posted August 3, 2021 Author Share Posted August 3, 2021 v4 is out? OFGS. That may take a few days to sort out. Quote Link to comment
rbourassa44 Posted August 19, 2021 Share Posted August 19, 2021 Hi, I searched but unfortunately I found nothing related to that. When the container does transcode, it just fills up the docker.img. Is it possible to tell the image to put the temporary files in a specific share? Thanks for this, once I can sort out this issue that's gonna be perfect! Quote Link to comment
OFark Posted August 19, 2021 Author Share Posted August 19, 2021 When you setup a job there is a destination folder, that will list all the folders in the docker image, one of those should be a map (that you've specified) to an external folder, which is where you want the encoded files to go. I'm not sure what would happen if you created a map to a folder that already existed within the image, which one would "win", so to speak. Quote Link to comment
markj24 Posted September 9, 2021 Share Posted September 9, 2021 Hi Just wondering if anyone has been able to get this up and running with QSV. No problems getting it running with nvidia but i keep getting errors with QSV. i've passed /dev/dri through, here is a screen shot of my ffmpeg config and the errors. any help would be appreciated. Quote Link to comment
OFark Posted September 10, 2021 Author Share Posted September 10, 2021 In my best programming voice: "What??" Basically the line in my source code, where that error is happening, that can't happen. There is no object reference. Can I just confirm you are running the latest version? If I assume you are running the latest version, my next message would be: can you send me the appsettings.json file from your appdata folder. It containes the URL and the API keys for Sonarr/Radarr so you may want to scrub those if it's publicly accessible. Quote Link to comment
markj24 Posted September 10, 2021 Share Posted September 10, 2021 Hi OFark i assume i am on the latest version. i have the repository set to ofark/compressarr:latest and set to update all my containers once a day. i attached the appsettings.json file and here is the info from the settings page Application: 1.2.7912.30173 Runtime: 5.0.9 FFmpeg: 4.2.1 Docker: Yes OS: Unix 5.10.28.0 OS 64bit: True App 64bit: True Thanks appsettings.json Quote Link to comment
OFark Posted September 13, 2021 Author Share Posted September 13, 2021 Thanks for that. It seems that the Github compiled code is one line shorter, I've found that bug and squashed it. Github is preparing releases as I type. Quote Link to comment
markj24 Posted September 14, 2021 Share Posted September 14, 2021 I'm still not able to get it working. I'm not getting the same errors anymore. here is the log now. Quote Link to comment
OFark Posted September 14, 2021 Author Share Posted September 14, 2021 So if you open the log for the individual file, (i) next to the line in the Job panel. You will see the output for FFMpeg, I can almost guarantee it's failed to process your video, but it started and there was an output. I'll not bore you with the detail but basically FFMpeg uses the error output of it's process to output it's progress. I have no idea why but I cannot use that for error checking. So that's why your seeing FFProbe errors, I can rely on that to detect that FFMpeg didn't finish properly. You'll need to see what FFMpeg ended with, there'll be lengthy white section of code that is the output of FFMpeg, this usually ends with the error details. From past experience with QSV and having looked at your profile, I think you'll need to tell FFMpeg how to use QSV, it's not provided in a driver like the Nvidia support is. It's also a lot smaller in terms of files sizes. Check out the following link: https://trac.ffmpeg.org/wiki/Hardware/QuickSync You can see what Compressarr is passing to FFMpeg and you can specify the additional parameters for FFMpeg in the Additional Parameters box in the Profile page in Compressarr. I do plan to build a pre-built template for this, but it's not at the top of my priority list right now. If your struggling with the settings, let me know and I'll see if I can help. Quote Link to comment
markj24 Posted September 14, 2021 Share Posted September 14, 2021 Hi Ofark Here is the individual log file. This stuff is way over my head so i would have no idea what additional parameters to add. if you have any suggestions they would be much appreciated but if not i can always reinstall my nvidia card and switch back to it. Calculating Best Encoder Options ffmpeg version 4.2.1-static https://johnvansickle.com/ffmpeg/ Copyright (c) 2000-2019 the FFmpeg developers built with gcc 6.3.0 (Debian 6.3.0-18+deb9u1) 20170516 configuration: --enable-gpl --enable-version3 --enable-static --disable-debug --disable-ffplay --disable-indev=sndio --disable-outdev=sndio --cc=gcc-6 --enable-fontconfig --enable-frei0r --enable-gnutls --enable-gmp --enable-libgme --enable-gray --enable-libaom --enable-libfribidi --enable-libass --enable-libvmaf --enable-libfreetype --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-librubberband --enable-libsoxr --enable-libspeex --enable-libsrt --enable-libvorbis --enable-libopus --enable-libtheora --enable-libvidstab --enable-libvo-amrwbenc --enable-libvpx --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxml2 --enable-libdav1d --enable-libxvid --enable-libzvbi --enable-libzimg libavutil 56. 31.100 / 56. 31.100 libavcodec 58. 54.100 / 58. 54.100 libavformat 58. 29.100 / 58. 29.100 libavdevice 58. 8.100 / 58. 8.100 libavfilter 7. 57.100 / 7. 57.100 libswscale 5. 5.100 / 5. 5.100 libswresample 3. 5.100 / 3. 5.100 libpostproc 55. 5.100 / 55. 5.100 Guessed Channel Layout for Input Stream #0.1 : 5.1 Input #0, matroska,webm, from '/storage/Media/TV Shows/Roswell, New Mexico/Season 03/Roswell, New Mexico S03E08 WEBRip-1080p.mkv': Metadata: encoder : libebml v1.4.2 + libmatroska v1.6.3 Stream #0:0: Video: h264 (High), yuv420p(tv, bt709, progressive), 1920x1080 [SAR 1:1 DAR 16:9], 23.98 fps, 23.98 tbr, 1k tbn, 47.95 tbc (default) Metadata: BPS-eng : 9105499 DURATION-eng : 00:42:27.045000000 NUMBER_OF_FRAMES-eng: 61068 NUMBER_OF_BYTES-eng: 2899014586 _STATISTICS_WRITING_APP-eng: mkvmerge v54.0.0 ('F Maj Pixie') 64-bit _STATISTICS_TAGS-eng: BPS DURATION NUMBER_OF_FRAMES NUMBER_OF_BYTES Stream #0:1(eng): Audio: eac3, 48000 Hz, 5.1, fltp (default) Metadata: BPS-eng : 640000 DURATION-eng : 00:42:27.072000000 NUMBER_OF_FRAMES-eng: 79596 NUMBER_OF_BYTES-eng: 203765760 _STATISTICS_WRITING_APP-eng: mkvmerge v54.0.0 ('F Maj Pixie') 64-bit _STATISTICS_TAGS-eng: BPS DURATION NUMBER_OF_FRAMES NUMBER_OF_BYTES Stream #0:2(eng): Subtitle: subrip Metadata: BPS-eng : 89 DURATION-eng : 00:41:51.814000000 NUMBER_OF_FRAMES-eng: 876 NUMBER_OF_BYTES-eng: 27998 _STATISTICS_WRITING_APP-eng: mkvmerge v54.0.0 ('F Maj Pixie') 64-bit _STATISTICS_TAGS-eng: BPS DURATION NUMBER_OF_FRAMES NUMBER_OF_BYTES Stream #0:3(eng): Subtitle: subrip Metadata: title : SDH BPS-eng : 96 DURATION-eng : 00:41:51.814000000 NUMBER_OF_FRAMES-eng: 1003 NUMBER_OF_BYTES-eng: 30335 _STATISTICS_WRITING_APP-eng: mkvmerge v54.0.0 ('F Maj Pixie') 64-bit _STATISTICS_TAGS-eng: BPS DURATION NUMBER_OF_FRAMES NUMBER_OF_BYTES [AVHWDeviceContext @ 0x583d280] No VA display found for any default device. Device creation failed: -22. [h264 @ 0x583c880] No device available for decoder: device type vaapi needed for codec h264. Stream mapping: Stream #0:0 -> #0:0 (h264 (native) -> hevc (hevc_vaapi)) Device setup failed for decoder on input stream #0:0 : Invalid argument ffmpeg version 4.2.1-static https://johnvansickle.com/ffmpeg/ Copyright (c) 2000-2019 the FFmpeg developers built with gcc 6.3.0 (Debian 6.3.0-18+deb9u1) 20170516 configuration: --enable-gpl --enable-version3 --enable-static --disable-debug --disable-ffplay --disable-indev=sndio --disable-outdev=sndio --cc=gcc-6 --enable-fontconfig --enable-frei0r --enable-gnutls --enable-gmp --enable-libgme --enable-gray --enable-libaom --enable-libfribidi --enable-libass --enable-libvmaf --enable-libfreetype --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-librubberband --enable-libsoxr --enable-libspeex --enable-libsrt --enable-libvorbis --enable-libopus --enable-libtheora --enable-libvidstab --enable-libvo-amrwbenc --enable-libvpx --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxml2 --enable-libdav1d --enable-libxvid --enable-libzvbi --enable-libzimg libavutil 56. 31.100 / 56. 31.100 libavcodec 58. 54.100 / 58. 54.100 libavformat 58. 29.100 / 58. 29.100 libavdevice 58. 8.100 / 58. 8.100 libavfilter 7. 57.100 / 7. 57.100 libswscale 5. 5.100 / 5. 5.100 libswresample 3. 5.100 / 3. 5.100 libpostproc 55. 5.100 / 55. 5.100 Guessed Channel Layout for Input Stream #0.1 : 5.1 Input #0, matroska,webm, from '/storage/Media/TV Shows/Roswell, New Mexico/Season 03/Roswell, New Mexico S03E08 WEBRip-1080p.mkv': Metadata: encoder : libebml v1.4.2 + libmatroska v1.6.3 Stream #0:0: Video: h264 (High), yuv420p(tv, bt709, progressive), 1920x1080 [SAR 1:1 DAR 16:9], 23.98 fps, 23.98 tbr, 1k tbn, 47.95 tbc (default) Metadata: BPS-eng : 9105499 DURATION-eng : 00:42:27.045000000 NUMBER_OF_FRAMES-eng: 61068 NUMBER_OF_BYTES-eng: 2899014586 _STATISTICS_WRITING_APP-eng: mkvmerge v54.0.0 ('F Maj Pixie') 64-bit _STATISTICS_TAGS-eng: BPS DURATION NUMBER_OF_FRAMES NUMBER_OF_BYTES Stream #0:1(eng): Audio: eac3, 48000 Hz, 5.1, fltp (default) Metadata: BPS-eng : 640000 DURATION-eng : 00:42:27.072000000 NUMBER_OF_FRAMES-eng: 79596 NUMBER_OF_BYTES-eng: 203765760 _STATISTICS_WRITING_APP-eng: mkvmerge v54.0.0 ('F Maj Pixie') 64-bit _STATISTICS_TAGS-eng: BPS DURATION NUMBER_OF_FRAMES NUMBER_OF_BYTES Stream #0:2(eng): Subtitle: subrip Metadata: BPS-eng : 89 DURATION-eng : 00:41:51.814000000 NUMBER_OF_FRAMES-eng: 876 NUMBER_OF_BYTES-eng: 27998 _STATISTICS_WRITING_APP-eng: mkvmerge v54.0.0 ('F Maj Pixie') 64-bit _STATISTICS_TAGS-eng: BPS DURATION NUMBER_OF_FRAMES NUMBER_OF_BYTES Stream #0:3(eng): Subtitle: subrip Metadata: title : SDH BPS-eng : 96 DURATION-eng : 00:41:51.814000000 NUMBER_OF_FRAMES-eng: 1003 NUMBER_OF_BYTES-eng: 30335 _STATISTICS_WRITING_APP-eng: mkvmerge v54.0.0 ('F Maj Pixie') 64-bit _STATISTICS_TAGS-eng: BPS DURATION NUMBER_OF_FRAMES NUMBER_OF_BYTES [AVHWDeviceContext @ 0x583e640] No VA display found for any default device. Device creation failed: -22. [h264 @ 0x581be40] No device available for decoder: device type vaapi needed for codec h264. Stream mapping: Stream #0:0 -> #0:0 (h264 (native) -> hevc (hevc_vaapi)) Stream #0:1 -> #0:1 (eac3 (native) -> ac3 (native)) Device setup failed for decoder on input stream #0:0 : Invalid argument Original Duration: 00:42:27.0720000 New Duration: FFprobe failed to analyse the output Sample Size: 1 | SSIM Est. | SSIM Act. Quote Link to comment
OFark Posted September 20, 2021 Author Share Posted September 20, 2021 Apologies for the delay, mad week at work. Your problem is: No VA display found for any default device. This basically means it can't find which device to use for the decoding the input stream. Normally this goes through a bunch of hardware locations, such as the current display (not relevant with docker) then some pre-determined locations. What you need to do is tell it which device got passed through using /dev/dri/ You can do this by going to the console, typing cd /dev/dri ls that should give you a list of devices. If you see renderD128, then something has gone wrong with your device forwarding in Docker, as this is one of those default locations FFmpeg will look (But you may want to try it anyway). Otherwise you can specify the following in the "Additional Arguments" box at the bottom of the FFmpeg preset. -hwaccel_device /dev/dri/renderD128 note* replace the renderD128 with whatever devices you have. Final note* CPU encoding whilst much slower is much better in terms of quality vs file size. Hardware encoding is much better in terms of speed only. Quote Link to comment
markj24 Posted September 23, 2021 Share Posted September 23, 2021 Hi Ofark It looks like the device was forwarded to docker ok. when i ssh into the container i can see /dev/dri/renderD128. adding -hwaccel_device /dev/dri/renderD128 seemed to fix the 'No VA display found for any default device' but now i am getting the following error 3:26:24 - System.IO.FileNotFoundException: Could not find file '/storage/Downloads/Complete/Dan Brown's The Lost Symbol/Season 01/Dan Brown's The Lost Symbol S01E02 WEBDL-1080p.mkv'. File name: '/storage/Downloads/Complete/Dan Brown's The Lost Symbol/Season 01/Dan Brown's The Lost Symbol S01E02 WEBDL-1080p.mkv' at System.IO.FileInfo.get_Length() at Compressarr.JobProcessing.JobManager.ProcessWorkItem(WorkItem wi, CancellationToken token) in /src/Compressarr/Compressarr/JobProcessing/JobManager.cs:line 541 Quote Link to comment
smidley Posted September 23, 2021 Share Posted September 23, 2021 I've been trying to find a program that can remove non-english audio tracks from files in bulk. Is this program the best solution for that job? Or is there something better suited for that? From what I can tell, I can make it work, I just need to figure out how to properly set the output folder when I have a list from radar as the source. Quote Link to comment
OFark Posted September 24, 2021 Author Share Posted September 24, 2021 17 hours ago, markj24 said: Hi Ofark It looks like the device was forwarded to docker ok. when i ssh into the container i can see /dev/dri/renderD128. adding -hwaccel_device /dev/dri/renderD128 seemed to fix the 'No VA display found for any default device' but now i am getting the following error 3:26:24 - System.IO.FileNotFoundException: Could not find file '/storage/Downloads/Complete/Dan Brown's The Lost Symbol/Season 01/Dan Brown's The Lost Symbol S01E02 WEBDL-1080p.mkv'. File name: '/storage/Downloads/Complete/Dan Brown's The Lost Symbol/Season 01/Dan Brown's The Lost Symbol S01E02 WEBDL-1080p.mkv' at System.IO.FileInfo.get_Length() at Compressarr.JobProcessing.JobManager.ProcessWorkItem(WorkItem wi, CancellationToken token) in /src/Compressarr/Compressarr/JobProcessing/JobManager.cs:line 541 Wonderful, it's getting somewhere then. What curious with this missing file is that before it must have been finding the file so that FFmpeg could fail against it. If you SSH into the container again and follow that path "/storage/.. etc. I suspect it's not going to be there and you need to check the Docker mappings. But you must have had it right before? Quote Link to comment
OFark Posted September 24, 2021 Author Share Posted September 24, 2021 14 hours ago, smidley said: I've been trying to find a program that can remove non-english audio tracks from files in bulk. Is this program the best solution for that job? Or is there something better suited for that? From what I can tell, I can make it work, I just need to figure out how to properly set the output folder when I have a list from radar as the source. Yes, yes you can. You can tell FFmpeg to just copy streams. With the Audio stream selector you can tell it to to delete tracks that are of a specific language, or to only copy eng or unknown tracks. You can also tell it to delete the track but only if there are other tracks, so films in only Mandarin, won't be silent. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.