DivideBy0 Posted August 16, 2021 Share Posted August 16, 2021 (edited) Dead Disk - In a weird and coincidental way it died right after I manually started a parity check I just manually started my parity check with "Write corrections to parity" disabled. As it was running parity check, one of my Disk went in disabled state and I get "Array Disk Have Errors" See attached screenshot. In the syslog I get a lot of these: [83311.219240] md: disk4 write error, sector=307985352 [83311.219244] md: disk4 write error, sector=307985360 [83311.219247] md: disk4 write error, sector=307985368 Should I stop the parity check or let it continue? And how do I fix this the right way? What are the next steps please? This is my first rodeo to this. System was stable and rock solid for almost a year. Many thanks Edited August 17, 2021 by johnwhicker Quote Link to comment
trurl Posted August 16, 2021 Share Posted August 16, 2021 Go to Tools - Diagnostics and attach the complete Diagnostics ZIP file to your NEXT post in this thread. Quote Link to comment
DivideBy0 Posted August 16, 2021 Author Share Posted August 16, 2021 (edited) 34 minutes ago, trurl said: Go to Tools - Diagnostics and attach the complete Diagnostics ZIP file to your NEXT post in this thread. Thank you Sir. Attached now... nas-unraid-diagnostics-20210816-1715.zip Edited August 16, 2021 by johnwhicker Quote Link to comment
trurl Posted August 16, 2021 Share Posted August 16, 2021 32 minutes ago, johnwhicker said: Thank you Sir. Attached now... SMART report for disk4 is incomplete for some reason. Emulated disk4 is mounted so that's good. No point in continuing with parity check. Shutdown, check connections, reboot, post new diagnostics. Quote Link to comment
DivideBy0 Posted August 16, 2021 Author Share Posted August 16, 2021 (edited) Very strange. Rebooted and DISK4 is completely gone from the device list and from "array" menu? But I see no errors that the disk is not longer available? I did check the connections. Perhaps need to pull the disk out and see if is dead? There is no light on. See attached diagnostic... nas-unraid-diagnostics-20210816-1800.zip Edited August 16, 2021 by johnwhicker Quote Link to comment
trurl Posted August 16, 2021 Share Posted August 16, 2021 That disk is missing in the diagnostics. Maybe try again with the connections. Do you have a spare? Quote Link to comment
DivideBy0 Posted August 16, 2021 Author Share Posted August 16, 2021 (edited) 1 hour ago, trurl said: That disk is missing in the diagnostics. Maybe try again with the connections. Do you have a spare? The disk is completely DEAD. I pulled it out and try it in a different system and it tries to starts, clanking noises and it dies. Is DEAD So the Array didn't throw any errors? Is that normal? I didn't have any data on that disk looks like. This is my first disk failure so still learning I robbed a disk from my spare / backup uNraid server and my array in this one is rebuilding as we speak. Edited August 17, 2021 by johnwhicker Quote Link to comment
trurl Posted August 17, 2021 Share Posted August 17, 2021 2 hours ago, johnwhicker said: So the Array didn't throw any errors? Is that normal? Do you have Notifications setup to alert you immediately by email or other agent as soon as a problem is detected? Unraid monitors disk SMART, but I guess a sudden failure is possible. Quote Link to comment
DivideBy0 Posted August 17, 2021 Author Share Posted August 17, 2021 (edited) 34 minutes ago, trurl said: Do you have Notifications setup to alert you immediately by email or other agent as soon as a problem is detected? Unraid monitors disk SMART, but I guess a sudden failure is possible. Whatever the default install gives me? Where do I check the SMART notification settings? I will check and report back. Thanks Sir I looked under Main and I have "Use Default" Edited August 17, 2021 by johnwhicker Quote Link to comment
trurl Posted August 17, 2021 Share Posted August 17, 2021 46 minutes ago, trurl said: Notifications setup to alert you immediately by email Settings - Notification Settings Quote Link to comment
DivideBy0 Posted August 17, 2021 Author Share Posted August 17, 2021 14 hours ago, trurl said: Settings - Notification Settings Copy that Sir. Thanks Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.