hunter6756 Posted September 24, 2021 Share Posted September 24, 2021 (edited) I have 11 HDDs connected to Unraid via USB adapters and a USB hub. The USB adapters are from the same manufacturer. They share the same device ID and name. To pass through them to VMs, I have to define the address/bus/port manually. I have done so successfully. The issue is: When I try to mount them via the Unassigned Devices plug, not all the disks are displayed in the UD. The disks found here seem to be random—both the number of them and which disks could have appeared. If I Mount them, then only those 4 or 5 disks(most times 4 disks) can be found in the /mnt/remotes Any help or ideas would be greatly appreciated! Edited September 24, 2021 by hunter6756 Link to comment
JorgeB Posted September 24, 2021 Share Posted September 24, 2021 Please use the existing plugin support thread: Link to comment
hunter6756 Posted September 24, 2021 Author Share Posted September 24, 2021 1 minute ago, JorgeB said: Please use the existing plugin support thread: Apologize. I will move to that thread Link to comment
trurl Posted September 24, 2021 Share Posted September 24, 2021 @hunter6756 You can go directly to the correct support thread for any of your plugins by clicking its Support Link on the Plugins page. Link to comment
Recommended Posts