ChristerB Posted October 11, 2021 Share Posted October 11, 2021 (edited) I Noticed that some of the shares was gone and browsed to the GUI and shares. Only cache disk shares are visible and raid shares are gone. I checked the logs and there was a lot of disk errors. My heart stopped beating and I figured I have some major problems. Do I really have issues with 6 of the disks or what might be the problem here? Could it be one of my SATA controller cards that broke down? If someone could have a look and figure out what my issues are I would be very thankful. //ChristerB tower-diagnostics-20211011-0228.zip Edited October 11, 2021 by ChristerB Quote Link to comment
JorgeB Posted October 11, 2021 Share Posted October 11, 2021 One of the LSI HBAs dropped: Oct 10 22:14:24 Tower kernel: mpt2sas_cm1: sending diag reset !! Oct 10 22:14:24 Tower kernel: mpt2sas_cm1: diag reset: FAILED Oct 10 22:14:26 Tower kernel: iommu: Removing device 0000:03:00.0 from group 19 Check that it's well seated and sufficiently cooled, you can also try a different PICe slot if available. Quote Link to comment
ChristerB Posted October 11, 2021 Author Share Posted October 11, 2021 (edited) 2 hours ago, JorgeB said: One of the LSI HBAs dropped: Oct 10 22:14:24 Tower kernel: mpt2sas_cm1: sending diag reset !! Oct 10 22:14:24 Tower kernel: mpt2sas_cm1: diag reset: FAILED Oct 10 22:14:26 Tower kernel: iommu: Removing device 0000:03:00.0 from group 19 Check that it's well seated and sufficiently cooled, you can also try a different PICe slot if available. Thank you @JorgeB, after I cooled down I actually understood what the log file told me. I will check the card but I haven't touched the server for weeks and it should be well seated and cooled. Any idea on a good replacement card if it is broken. (I'll read through the recommendations that already exists on this forum) //ChristerB Edited October 11, 2021 by ChristerB Quote Link to comment
ChatNoir Posted October 11, 2021 Share Posted October 11, 2021 1 hour ago, ChristerB said: Any idea on a good replacement card if it is broken. (I'll read through the recommendations that already exists on this forum) You can check this : Quote Link to comment
ChristerB Posted October 11, 2021 Author Share Posted October 11, 2021 31 minutes ago, ChatNoir said: You can check this : Thanks a lot! Quote Link to comment
ChristerB Posted October 20, 2021 Author Share Posted October 20, 2021 So, it seemed to be a heating issue (I had put the fans on low and forgot to put it back on full). Main problem solved and I will open a new topic on potential disk errors. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.