lovingHDTV Posted October 17, 2021 Share Posted October 17, 2021 This AM I noticed two dockers quit running over night. I would get Execution Error 403. I googled around a bit and it seems that my docker image was corrupted. So I followed the instructions to recreate it and re-install all my previous dockers. It never returned from a installing that last docker so the prompt/log window never went away. I rebooted the server and when it came back up it started a parity check which I have paused. I was able to start the first two dockers, then hit run all. Now it is just hanging and nothing is starting. Not sure what is going wrong, but here are my diagnostics. thanks, david tower-diagnostics-20211017-1118.zip Quote Link to comment
Squid Posted October 17, 2021 Share Posted October 17, 2021 Your Unassigned device (WD-WCC4M3359195) is having a heart attack and needs to be replaced. 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 3029 3 Spin_Up_Time POS--K 199 170 021 - 3033 4 Start_Stop_Count -O--CK 096 096 000 - 4878 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 050 050 000 - 37077 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 123 192 Power-Off_Retract_Count -O--CK 200 200 000 - 68 193 Load_Cycle_Count -O--CK 076 076 000 - 372728 194 Temperature_Celsius -O---K 116 109 000 - 31 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 11 198 Offline_Uncorrectable ----CK 200 200 000 - 11 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 198 198 000 - 906 Raw Read Error Rate should be always at 0 on WD drives This is presumably where your docker.img is mounted and is odds on the root of all your problems. Quote Link to comment
lovingHDTV Posted October 17, 2021 Author Share Posted October 17, 2021 I was just posting that I see that sdi is gone. Yes that is where my docker.img is stored along with all my dockers. So how best to recover? Two days ago I installed the new version of the docker backup script and did a complete backup to disk7. I moved all my dockers from my cache drive because I had swapped it to an SSD and it was getting an insane number of writes. How would you recommend me recovering? As I installed docker when it first came out, I've not kept up on what is the recommended way to do it any longer. Back then you couldn't have it on in share on the array. Is that still the case? thanks Quote Link to comment
lovingHDTV Posted October 17, 2021 Author Share Posted October 17, 2021 I had a second 2TB drive I had installed to make a pool for my docker stuff. I just brought that online and it all worked as planned. thanks Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.