SavageAUS Posted November 17, 2021 Share Posted November 17, 2021 As the title states I have a dual parity setup and parity 1 has 1 error. I have run a parity check and that passed without issues then I ran a short and extended smart test on the disk and they both completed without error. Array health report says fail because of this 1 error but I can’t see what it is or how to clear it? Sent from my iPhone using Tapatalk Quote Link to comment
JonathanM Posted November 17, 2021 Share Posted November 17, 2021 Likely a read failure that was successfully rewritten when it was detected. Diagnostics should show what happened. If you reboot the error will reset, as well as losing any evidence of what happened if you don't download diagnostics before rebooting. Quote Link to comment
SavageAUS Posted November 17, 2021 Author Share Posted November 17, 2021 Diagnostics attached skynet-diagnostics-20211118-0822.zip Quote Link to comment
SavageAUS Posted November 18, 2021 Author Share Posted November 18, 2021 Likely a read failure that was successfully rewritten when it was detected. Diagnostics should show what happened. If you reboot the error will reset, as well as losing any evidence of what happened if you don't download diagnostics before rebooting.Can you see anything in my diagnostics?Sent from my iPhone using Tapatalk Quote Link to comment
JorgeB Posted November 18, 2021 Share Posted November 18, 2021 It's logged as a disk problem, but since the SMART test passed after it's OK for now, just keep monitoring. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.