RNO Posted November 21, 2021 Share Posted November 21, 2021 Hi guys, Thanks to you I successfully upgraded from 6.6.5 to 6.9.2. I wanted to install Jellyfin and start streaming to mobile devices. Alas, I have a problem with /dev/dri missing. searching what it was about, I found this is due to the hardware encoding acceleration not being enabled. I found this thread : But I can't manage to enable this feature. I installed Intel-GPU-TOP, but it doesn't seems to help. I touched the i915.conf file to create it in /boot/config/modprobe.d/ no change I created the directory /dev/dri myself. It doesn't help. my hardware is : SuperMicro X10SLM-F (4 SATA 6.0Gbs + 2 SATA 3.0Gbs) 3x Supermicro AOC-SAS2LP-MV8 Core™ i3-4130T CPU @ 2.90GHz 16 GB RAM (upgradable to 32GB) LAN speed is 1Gb/s a monitor is plugged in the VGA port of the motherboard. Do you know what to do to fix my problem ? Quote Link to comment
Tristankin Posted November 22, 2021 Share Posted November 22, 2021 Did you reboot after the touch file? You should not need to make the dev/dri directory. This is created when the module is loaded. Quote Link to comment
RNO Posted November 22, 2021 Author Share Posted November 22, 2021 I did reboot. The module is not loaded. Quote Link to comment
RNO Posted December 8, 2021 Author Share Posted December 8, 2021 How can I figure if something is missing in my setting or configuration ? I really don't understand how to enable the intel support. I thought it would be simple, but I can't find the How-to and the different threads are not really helping. Here I join the syslog, if someone can teach me something maybe obvious ? syslog.txt Quote Link to comment
twitch_ferrett Posted February 1, 2022 Share Posted February 1, 2022 (edited) I am in the same boat, I cannot enable Intel Quick Sync. I have an Intel i7-12700K on an ASRcok PG Riptide. I have made sure that the integrated GPU is set instead of "Auto". I have installed the Intel GPU Top. I have tried adding "isolcpus=2-11 acpi_enforce_resources=lax i915.force_probe=4680" to the Syslinux Config. I have run "touch /boot/config/modprobe.d/i915.conf". Nothing is able to get this working. I have rebooted after each change. Still no dice. Please help! I am at the end of the rope and am about to ditch Unraid and go back to Windows. Edited February 1, 2022 by twitch_ferrett misspelling Quote Link to comment
ChatNoir Posted February 1, 2022 Share Posted February 1, 2022 2 hours ago, twitch_ferrett said: I have an Intel i7-12700K Are you using 6.9.2 or 6.10.0RC2 ? This new line of processor iGPU require a recent kernel version only available on the RC I think. Your diagnostics might show something, please attach the complete zip file to your next post. Quote Link to comment
twitch_ferrett Posted February 2, 2022 Share Posted February 2, 2022 ChatNoir, I am running 6.9.2. I have read that this CPU may not be supported till the next kernel, which really puts things in a bind. I need the power for the server I built. Thank you for your assistance in advance.asrock-svr-diagnostics-20220201-2137.zip Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.