dv310p3r Posted December 27, 2021 Share Posted December 27, 2021 (edited) I switched my AMD Ryzen 2700X to an Intel 10700 because I wanted to take advantage of QuickSync for my Plex Server. Since that switch I've been having serious issues. Here's my current hardware: Unraid Version - 6.9.2 Motherboard - MSI Z490-A PRO CPU - Core I7 10700K RAM - 32 GB Crucial Ballistix Sport LT 2666 MHz DDR4 DRAM DISKS - Unassigned Samsung SSD 860 Evo 1TB - used for downloads - Cache (two SSD 850 Evo 500 GB - Array (10 disks + 1 Parity total 11 disks) Parity is 14tb Disks are either 14tb, 8tb and 3 tb I've done no overclock, nor do I plan to. Issue #1: Since the switch over, after rebooting the system, sometimes it'll get an IP, and other times it'll get the auto assigned 169.... address. I have to restart it several times until it connects to the network. Issue #2: It's randomly freezing out of nowhere. The GUI won't load and after a restart it'll work again (unless it didn't get the right IP address). Sometimes it'll work for minutes, other times hours. Honestly, I have no idea what to do, or where to start. Any help would be greatly appreciated. Edited December 27, 2021 by dv310p3r Quote Link to comment
dlandon Posted December 27, 2021 Share Posted December 27, 2021 Start by posting your diagnostics zip. Quote Link to comment
dv310p3r Posted December 27, 2021 Author Share Posted December 27, 2021 ceres-station-diagnostics-20211227-1648.zip Attached. Quote Link to comment
Squid Posted December 27, 2021 Share Posted December 27, 2021 Delete /config/network.cfg on the flash drive and reboot. See if this continues. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.