mgadbois Posted January 16, 2022 Share Posted January 16, 2022 Twice in the past week I have had my server become unresponsive and require a hard restart. The last time was on 1/15 and just before 10pm local time. I had just finished watching a movie on Plex and went to look at server GUI and it was unresponsive. Plex was no longer responsive either and server did not respond to pings. Unfortunately I don't have a monitor and keyboard handy to hook up to the server. Thoughts? Thanks in advance.. astro-server-diagnostics-20220116-0800.zip Quote Link to comment
TexasUnraid Posted January 16, 2022 Share Posted January 16, 2022 I have been dealing with similar issues for months, it will just randomly lock up and require a hard reset. Sometimes multiple times in a single day, others it will go weeks between. I can not seem to narrow down the issue but it happens more when it is actively doing something. It never saves diagnostics or logs which makes it a real pain as well. Only started happening after updating to 6.9.2, although it was not right away after updating. Quote Link to comment
JorgeB Posted January 17, 2022 Share Posted January 17, 2022 Enable the syslog server and post that after a crash. Quote Link to comment
mgadbois Posted January 17, 2022 Author Share Posted January 17, 2022 Will do. Thanks for the advice. Quote Link to comment
mgadbois Posted January 25, 2022 Author Share Posted January 25, 2022 Looks like it stopped responding to me this evening. I attached some logs. Hope this helps. SyslogCatchAll-2022-01-24.txt Quote Link to comment
mgadbois Posted January 25, 2022 Author Share Posted January 25, 2022 Additional Note. UPS is not connected which it shy those errors are there now. Quote Link to comment
JorgeB Posted January 25, 2022 Share Posted January 25, 2022 2022-01-24 01:27:24 Kernel.Warning 10.5.254.80 Jan 24 01:27:25 Astro-Server kernel: macvlan_broadcast+0x10e/0x13c [macvlan] 2022-01-24 01:27:24 Kernel.Warning 10.5.254.80 Jan 24 01:27:25 Astro-Server kernel: macvlan_process_broadcast+0xf8/0x143 [macvlan] Macvlan call traces are usually the result of having dockers with a custom IP address, upgrading to v6.10 and switching to ipvlan might fix it (Settings -> Docker Settings -> Docker custom network type -> ipvlan (advanced view must be enable, top right)), or see below for more info. https://forums.unraid.net/topic/70529-650-call-traces-when-assigning-ip-address-to-docker-containers/ See also here: https://forums.unraid.net/bug-reports/stable-releases/690691-kernel-panic-due-to-netfilter-nf_nat_setup_info-docker-static-ip-macvlan-r1356/ Quote Link to comment
mgadbois Posted January 25, 2022 Author Share Posted January 25, 2022 Thanks. I have my plex server on a custom IP. I'll give that a look. Thanks Quote Link to comment
mgadbois Posted January 25, 2022 Author Share Posted January 25, 2022 My unRAID server is on a 10.5.254.80/24 and my plex server is 10.5.254.83/24. Everything else is on a customer "proxynet" network on the unRAID server. Not sure if thius is an issue or not. Quote Link to comment
mgadbois Posted January 31, 2022 Author Share Posted January 31, 2022 I changed the IP of my PleSyslogCatchAll-2022-01-30.txtx server to "Host" to help stop the maclvlan issue. Server became unresponsive today. Attached are syslog server log fileastro-server-diagnostics-20220130-1805.zip Diagnostic logs attached after reboot. Thoughts?? Quote Link to comment
JorgeB Posted January 31, 2022 Share Posted January 31, 2022 Still looks related to the same issue as posted above. Quote Link to comment
mgadbois Posted January 31, 2022 Author Share Posted January 31, 2022 I don't have any custom IP addresses on any dockers. I changed te one I had and rebooted afterwards so not sure what the darn thing is looking at? Quote Link to comment
JorgeB Posted January 31, 2022 Share Posted January 31, 2022 On 1/25/2022 at 7:54 AM, JorgeB said: upgrading to v6.10 and switching to ipvlan might fix it (Settings -> Docker Settings -> Docker custom network type -> ipvlan (advanced view must be enable, top right)), or see below for more info. You can still try this. Quote Link to comment
mgadbois Posted January 31, 2022 Author Share Posted January 31, 2022 I'll try that when I get home in a few days. Thanks for the feedback. Quote Link to comment
mgadbois Posted February 10, 2022 Author Share Posted February 10, 2022 Upgraded to 6.10.rc2 and set the docker network to ipvlan and the system ahs been up for 7 days and 23 hours. So far so good. Thanks all. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.