rcurrier8 Posted January 26, 2022 Share Posted January 26, 2022 I am trying my hand at creating my first server for media. I am just messing around with the hardware using spare SSDs prior to buying all new hard drives to learn the software. I am seeing incredibly slow read/writes when doing the parity check and when using preclear disk. I thought this may be a CPU limitation, so I purchased an upgrade with no change. Then thought my HBA may be the culprit, updated it and still no change. Ran “Fix Common Problems” and no errors were found. Am I wrong with thinking this is too slow? With (IMO) good hardware and SSDs I was expecting read/writes of at least 100 mb/s. Current hardware: MB: Intel S2600CP (12/23/13 BIOS as Intel no longer supports MBs so no update is available) CPU: Xeon E5-2697 V2 (x1 but have the option to run dual CPUs) Ram: 128GB ECC DDR3 HBA: LSI 9211-8i updated to V20 in IT mode Hard Drives: 6x Samsung 840 1tb, 3x Intel 520 series 480GB (one to be used as cache) Attached is the diag files as well as the disk smart files. tower-diagnostics-20220126-1346.zip DISK_SMART_FILES.zip Quote Link to comment
JorgeB Posted January 26, 2022 Share Posted January 26, 2022 The 840 EVO can turn slow reading old data, especially if not using the latest firmware, run the diskspeed docker to test read performance in all devices. Quote Link to comment
Solution Squid Posted January 26, 2022 Solution Share Posted January 26, 2022 sdd (disk 1) seems to have connection problems and is suffering from device resets slowing everything down. Reseat the cabling Quote Link to comment
rcurrier8 Posted January 26, 2022 Author Share Posted January 26, 2022 59 minutes ago, Squid said: sdd (disk 1) seems to have connection problems and is suffering from device resets slowing everything down. Reseat the cabling I removed this disk, started a new array and the speeds have significantly improved. For my knowledge how could you see that the disk was having connection problems (where in the logs)? Quote Link to comment
Squid Posted January 26, 2022 Share Posted January 26, 2022 Jan 26 10:25:10 Tower kernel: sd 2:0:2:0: attempting task abort!scmd(0x00000000e31eeef1), outstanding for 30382 ms & timeout 30000 ms Jan 26 10:25:10 Tower kernel: sd 2:0:2:0: [sdd] tag#3057 CDB: opcode=0x2a 2a 08 3a 38 3e a8 00 00 08 00 Jan 26 10:25:10 Tower kernel: scsi target2:0:2: handle(0x000a), sas_address(0x4433221101000000), phy(1) Jan 26 10:25:10 Tower kernel: scsi target2:0:2: enclosure logical id(0x5000000080000000), slot(2) Jan 26 10:25:11 Tower kernel: sd 2:0:2:0: task abort: SUCCESS scmd(0x00000000e31eeef1) Jan 26 10:25:11 Tower kernel: sd 2:0:2:0: Power-on or device reset occurred ### [PREVIOUS LINE REPEATED 1 TIMES] ### Jan 26 10:25:13 Tower rc.diskinfo[8139]: SIGHUP received, forcing refresh of disks info. Jan 26 10:25:46 Tower kernel: sd 2:0:2:0: attempting task abort!scmd(0x0000000038bf96d8), outstanding for 30329 ms & timeout 30000 ms Jan 26 10:25:46 Tower kernel: sd 2:0:2:0: [sdd] tag#3072 CDB: opcode=0x2a 2a 08 3a 38 3e a8 00 00 08 00 Jan 26 10:25:46 Tower kernel: scsi target2:0:2: handle(0x000a), sas_address(0x4433221101000000), phy(1) Jan 26 10:25:46 Tower kernel: scsi target2:0:2: enclosure logical id(0x5000000080000000), slot(2) Jan 26 10:25:47 Tower kernel: sd 2:0:2:0: task abort: SUCCESS scmd(0x0000000038bf96d8) Jan 26 10:25:47 Tower kernel: sd 2:0:2:0: Power-on or device reset occurred ### [PREVIOUS LINE REPEATED 1 TIMES] ### Jan 26 10:25:50 Tower rc.diskinfo[8139]: SIGHUP received, forcing refresh of disks info. ### [PREVIOUS LINE REPEATED 1 TIMES] ### Jan 26 10:27:21 Tower kernel: sd 2:0:2:0: attempting task abort!scmd(0x0000000074c99a4d), outstanding for 30139 ms & timeout 30000 ms Jan 26 10:27:21 Tower kernel: sd 2:0:2:0: [sdd] tag#3107 CDB: opcode=0x2a 2a 08 3a 38 3e b0 00 00 08 00 Jan 26 10:27:21 Tower kernel: scsi target2:0:2: handle(0x000a), sas_address(0x4433221101000000), phy(1) Jan 26 10:27:21 Tower kernel: scsi target2:0:2: enclosure logical id(0x5000000080000000), slot(2) Jan 26 10:27:21 Tower kernel: sd 2:0:2:0: task abort: SUCCESS scmd(0x0000000074c99a4d) Jan 26 10:27:21 Tower kernel: sd 2:0:2:0: Power-on or device reset occurred Jan 26 10:27:22 Tower rc.diskinfo[8139]: SIGHUP received, forcing refresh of disks info. Jan 26 10:27:22 Tower kernel: sd 2:0:2:0: Power-on or device reset occurred Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.