camens Posted February 8, 2022 Share Posted February 8, 2022 Was having trouble with one of my new drives (installed to replace failing drive) becoming unmountable. Ran through checkdisk and it appeared to have fixed the problem. However, on running the parity check it recorded 325 errors. I have no idea what to even look for in the downloaded diagnostics. Would appreciate if anyone can shed some light on what I should do about the errors. Thanks tower-diagnostics-20220207-1946.zip Quote Link to comment
JorgeB Posted February 8, 2022 Share Posted February 8, 2022 What commend did you use to repair the filesystem? Quote Link to comment
camens Posted February 8, 2022 Author Share Posted February 8, 2022 I used xfs_repair with the option to delete the log or ignore the log or something along those lines. Sorry, not an expert here. Quote Link to comment
JorgeB Posted February 8, 2022 Share Posted February 8, 2022 Please post the complete command, more interested in the device you used. Quote Link to comment
camens Posted February 11, 2022 Author Share Posted February 11, 2022 I honestly don't remember. I used the unraid help link it gave me and used the command the help document recommended. All I remember is that it was to do with the log and clearing the log. I ran the parity again and it reported the same 325 errors. Quote Link to comment
JorgeB Posted February 11, 2022 Share Posted February 11, 2022 You might have repaired the sdX device, that would make parity out of sync, but if you don't remember you still should run a correcting parity check. Quote Link to comment
camens Posted February 22, 2022 Author Share Posted February 22, 2022 I did that and it came back with 1150 errors. I have the fix errors but when I ran it again it still said 1150 errors. Any idea whats going on? Quote Link to comment
JorgeB Posted February 22, 2022 Share Posted February 22, 2022 That suggests first one was non correct, if the second one was correct it would find the same errors, but this time fix them, you can post the diags to confirm, if you didn't reboot yet, or run another check and it should find 0 errors. Quote Link to comment
camens Posted February 22, 2022 Author Share Posted February 22, 2022 OK, I'm running another check and will post what its results are. Quote Link to comment
camens Posted March 4, 2022 Author Share Posted March 4, 2022 I'm starting to think something else is wrong. I always have parity errors now, and the server is rebooting randomly. I always run the parity check to fix errors as well. Currently doing another parity check, and its showing 398 errors so far. Quote Link to comment
ChatNoir Posted March 4, 2022 Share Posted March 4, 2022 25 minutes ago, camens said: I'm starting to think something else is wrong. I always have parity errors now, and the server is rebooting randomly. Please attach new diagnostics. Have you checked your memory ? Quote Link to comment
camens Posted March 4, 2022 Author Share Posted March 4, 2022 Can't get through a parity check without a reboot. Going to run memtest now. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.