boosting1bar Posted February 20, 2022 Share Posted February 20, 2022 (edited) I've been running unRAID for almost a couple years now with no issues at all and about 4 months ago my server has started crashing every 24-48h. I've swapped out most of the hardware (had an old CPU and RAM in it initially, now new). I don't get any warning, happens whether my docker containers are up and running or not. When it locks up I can't get into the GUI so I tried to mirror the syslog to the USB to at least try to catch something. I've attached the diagnostics and have the syslog file I can add too if needed. Really appreciate any help! Version 6.10-rc2 chonkyboi-diagnostics-20220219-1929.zip Edited February 20, 2022 by boosting1bar Quote Link to comment
JorgeB Posted February 20, 2022 Share Posted February 20, 2022 8 hours ago, boosting1bar said: mirror the syslog to the USB to at least try to catch something. You should also post that. Quote Link to comment
boosting1bar Posted February 20, 2022 Author Share Posted February 20, 2022 Here's the syslog file as well, its too big to attach https://www.dropbox.com/s/8tshs02ni9g1bcf/syslog?dl=0 Quote Link to comment
JorgeB Posted February 20, 2022 Share Posted February 20, 2022 zip doesn't unpack. Quote Link to comment
Squid Posted February 20, 2022 Share Posted February 20, 2022 Intel(R) Core(TM) i9-10900K CPU @ 3.70GHz First thing to check with any crashes when running 10th Gen+ is what the TDP limits are within the BIOS. 99% of the 10th Gen motherboards + would ship with defaults that effectively set the TDP of the processor to be 4096 Watts instead of in your case 125 watts Change the TDP setting from what is probably auto to instead be 125W Also, disable XMP within the BIOS to stop the overclock on the RAM. Crucial doesn't specify what the SPD speed is on the RAM, but it's most likely 2133 and your currently running at 2933 Quote Link to comment
boosting1bar Posted February 20, 2022 Author Share Posted February 20, 2022 1 hour ago, Squid said: Intel(R) Core(TM) i9-10900K CPU @ 3.70GHz First thing to check with any crashes when running 10th Gen+ is what the TDP limits are within the BIOS. 99% of the 10th Gen motherboards + would ship with defaults that effectively set the TDP of the processor to be 4096 Watts instead of in your case 125 watts Change the TDP setting from what is probably auto to instead be 125W Also, disable XMP within the BIOS to stop the overclock on the RAM. Crucial doesn't specify what the SPD speed is on the RAM, but it's most likely 2133 and your currently running at 2933 Thank you very much, I’ll start there! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.