TechElch Posted March 15, 2022 Share Posted March 15, 2022 Ich habe folgendes Problem, ich bekomme egal was ich versuche meine RX580 nicht vernünftig durchgeschliffen. Die Videos von Space Invader One habe ich alle schon durch. Ich weiß dass das auf jeden Fall geht, da ich vor ca einem Jahr mit derselben Hardware schon einmal Unraid aufgesetzt und nach vielem Hin und her zum laufen bekommen habe.. Ich habe meine rx 580 jetzt auf der x8 pci lane, da ich sonst dauerhaft den AMD Bug habe (127 Error), jetzt kommt zwar kein fehler mehr doch ein Bild bekomme ich trozdem nicht. Das ist der Log der Windows 10 VM: -nodefaults \ -chardev socket,id=charmonitor,fd=31,server,nowait \ -mon chardev=charmonitor,id=monitor,mode=control \ -rtc base=localtime \ -no-hpet \ -no-shutdown \ -boot strict=on \ -device pcie-root-port,port=0x8,chassis=1,id=pci.1,bus=pcie.0,multifunction=on,addr=0x1 \ -device pcie-root-port,port=0x9,chassis=2,id=pci.2,bus=pcie.0,addr=0x1.0x1 \ -device pcie-root-port,port=0x12,chassis=3,id=pci.3,bus=pcie.0,addr=0x2.0x2 \ -device pcie-root-port,port=0x13,chassis=4,id=pci.4,bus=pcie.0,addr=0x2.0x3 \ -device pcie-root-port,port=0x14,chassis=5,id=pci.5,bus=pcie.0,addr=0x2.0x4 \ -device ich9-usb-ehci1,id=usb,bus=pcie.0,addr=0x7.0x7 \ -device ich9-usb-uhci1,masterbus=usb.0,firstport=0,bus=pcie.0,multifunction=on,addr=0x7 \ -device ich9-usb-uhci2,masterbus=usb.0,firstport=2,bus=pcie.0,multifunction=on,addr=0x7.0x1 \ -device ich9-usb-uhci3,masterbus=usb.0,firstport=4,bus=pcie.0,addr=0x7.0x2 \ -device virtio-serial-pci,id=virtio-serial0,bus=pci.2,addr=0x0 \ -blockdev '{"driver":"file","filename":"/mnt/user/domains/Test2/vdisk1.img","node-name":"libvirt-3-storage","cache":{"direct":false,"no-flush":false},"auto-read-only":true,"discard":"unmap"}' \ -blockdev '{"node-name":"libvirt-3-format","read-only":false,"cache":{"direct":false,"no-flush":false},"driver":"raw","file":"libvirt-3-storage"}' \ -device virtio-blk-pci,bus=pci.3,addr=0x0,drive=libvirt-3-format,id=virtio-disk2,bootindex=1,write-cache=on \ -blockdev '{"driver":"file","filename":"/mnt/user/isos/Win10_21H2_German_x64.iso","node-name":"libvirt-2-storage","auto-read-only":true,"discard":"unmap"}' \ -blockdev '{"node-name":"libvirt-2-format","read-only":true,"driver":"raw","file":"libvirt-2-storage"}' \ -device ide-cd,bus=ide.0,drive=libvirt-2-format,id=sata0-0-0,bootindex=2 \ -blockdev '{"driver":"file","filename":"/mnt/user/isos/virtio-win-0.1.190-1.iso","node-name":"libvirt-1-storage","auto-read-only":true,"discard":"unmap"}' \ -blockdev '{"node-name":"libvirt-1-format","read-only":true,"driver":"raw","file":"libvirt-1-storage"}' \ -device ide-cd,bus=ide.1,drive=libvirt-1-format,id=sata0-0-1 \ -netdev tap,fd=33,id=hostnet0 \ -device virtio-net,netdev=hostnet0,id=net0,mac=52:54:00:e4:37:96,bus=pci.1,addr=0x0 \ -chardev pty,id=charserial0 \ -device isa-serial,chardev=charserial0,id=serial0 \ -chardev socket,id=charchannel0,fd=34,server,nowait \ -device virtserialport,bus=virtio-serial0.0,nr=1,chardev=charchannel0,id=channel0,name=org.qemu.guest_agent.0 \ -device usb-tablet,id=input0,bus=usb.0,port=1 \ -device 'vfio-pci,host=0000:06:00.0,id=hostdev0,bus=pci.4,multifunction=on,addr=0x0,romfile=/mnt/user/ISOS SAFE/XFX.RX580.8192.170412.rom' \ -device vfio-pci,host=0000:06:00.1,id=hostdev1,bus=pci.4,addr=0x0.0x1 \ -sandbox on,obsolete=deny,elevateprivileges=deny,spawn=deny,resourcecontrol=deny \ -msg timestamp=on 2022-03-15 08:22:30.256+0000: Domain id=3 is tainted: high-privileges 2022-03-15 08:22:30.256+0000: Domain id=3 is tainted: host-cpu char device redirected to /dev/pts/1 (label charserial0) Specs: AsRock B450M Pro4 XFX RX580 Ryzen 7 2700X 16GB 3200 Corsair RGB Ram 2 x 2TB HDD 1 x 500GB Samsung EVO NVME 3.0 1 x 120GB Western Digital M.2 Sata SSD PS: Vielen Dank schonmal für eure Hilfe :) Quote Link to comment
mgutt Posted March 19, 2022 Share Posted March 19, 2022 Mehr Input bitte. An vfio gebunden? VM Config sieht wie aus? Quote Link to comment
ich777 Posted March 19, 2022 Share Posted March 19, 2022 On 3/15/2022 at 9:45 AM, TechElch said: PS: Vielen Dank schonmal für eure Hilfe Bitte poste deine Diagnostics und vergiss nicht das du dir auf jeden Fall für diese Grafikkarte das AMD Vendor Reset Plugin installieren musst. Quote Link to comment
TechElch Posted March 20, 2022 Author Share Posted March 20, 2022 So danke für die ersten Rückmeldungen, da ich auf der 6.9.2 das Amd Vendor Reset Plugin nicht installieren konnte habe ich erstmal meinen Server auf die aktuelle Next version updated. Der Aktuelle VM LOG: 2022-03-20 11:36:30.295+0000: starting up libvirt version: 7.10.0, qemu version: 6.2.0, kernel: 5.15.30-Unraid, hostname: Wonderland LC_ALL=C \ PATH=/bin:/sbin:/usr/bin:/usr/sbin \ HOME='/var/lib/libvirt/qemu/domain-1-Windows 10' \ XDG_DATA_HOME='/var/lib/libvirt/qemu/domain-1-Windows 10/.local/share' \ XDG_CACHE_HOME='/var/lib/libvirt/qemu/domain-1-Windows 10/.cache' \ XDG_CONFIG_HOME='/var/lib/libvirt/qemu/domain-1-Windows 10/.config' \ /usr/local/sbin/qemu \ -name 'guest=Windows 10,debug-threads=on' \ -S \ -object '{"qom-type":"secret","id":"masterKey0","format":"raw","file":"/var/lib/libvirt/qemu/domain-1-Windows 10/master-key.aes"}' \ -blockdev '{"driver":"file","filename":"/usr/share/qemu/ovmf-x64/OVMF_CODE-pure-efi.fd","node-name":"libvirt-pflash0-storage","auto-read-only":true,"discard":"unmap"}' \ -blockdev '{"node-name":"libvirt-pflash0-format","read-only":true,"driver":"raw","file":"libvirt-pflash0-storage"}' \ -blockdev '{"driver":"file","filename":"/etc/libvirt/qemu/nvram/ba800835-6a60-2540-766a-6dc1a4603c67_VARS-pure-efi.fd","node-name":"libvirt-pflash1-storage","auto-read-only":true,"discard":"unmap"}' \ -blockdev '{"node-name":"libvirt-pflash1-format","read-only":false,"driver":"raw","file":"libvirt-pflash1-storage"}' \ -machine pc-q35-5.1,usb=off,dump-guest-core=off,mem-merge=off,pflash0=libvirt-pflash0-format,pflash1=libvirt-pflash1-format,memory-backend=pc.ram \ -accel kvm \ -cpu host,migratable=on,topoext=on,hv-time=on,hv-relaxed=on,hv-vapic=on,hv-spinlocks=0x1fff,hv-vendor-id=none,host-cache-info=on,l3-cache=off \ -m 10240 \ -object '{"qom-type":"memory-backend-ram","id":"pc.ram","size":10737418240}' \ -overcommit mem-lock=off \ -smp 8,sockets=1,dies=1,cores=4,threads=2 \ -uuid ba800835-6a60-2540-766a-6dc1a4603c67 \ -display none \ -no-user-config \ -nodefaults \ -chardev socket,id=charmonitor,fd=34,server=on,wait=off \ -mon chardev=charmonitor,id=monitor,mode=control \ -rtc base=localtime \ -no-hpet \ -no-shutdown \ -boot strict=on \ -device '{"driver":"pcie-root-port","port":8,"chassis":1,"id":"pci.1","bus":"pcie.0","multifunction":true,"addr":"0x1"}' \ -device '{"driver":"pcie-root-port","port":9,"chassis":2,"id":"pci.2","bus":"pcie.0","addr":"0x1.0x1"}' \ -device '{"driver":"pcie-root-port","port":18,"chassis":3,"id":"pci.3","bus":"pcie.0","addr":"0x2.0x2"}' \ -device '{"driver":"pcie-root-port","port":19,"chassis":4,"id":"pci.4","bus":"pcie.0","addr":"0x2.0x3"}' \ -device '{"driver":"pcie-root-port","port":20,"chassis":5,"id":"pci.5","bus":"pcie.0","addr":"0x2.0x4"}' \ -device '{"driver":"pcie-root-port","port":10,"chassis":6,"id":"pci.6","bus":"pcie.0","addr":"0x1.0x2"}' \ -device '{"driver":"pcie-pci-bridge","id":"pci.7","bus":"pci.1","addr":"0x0"}' \ -device '{"driver":"ich9-usb-ehci1","id":"usb","bus":"pcie.0","addr":"0x7.0x7"}' \ -device '{"driver":"ich9-usb-uhci1","masterbus":"usb.0","firstport":0,"bus":"pcie.0","multifunction":true,"addr":"0x7"}' \ -device '{"driver":"ich9-usb-uhci2","masterbus":"usb.0","firstport":2,"bus":"pcie.0","multifunction":true,"addr":"0x7.0x1"}' \ -device '{"driver":"ich9-usb-uhci3","masterbus":"usb.0","firstport":4,"bus":"pcie.0","addr":"0x7.0x2"}' \ -device '{"driver":"virtio-serial-pci","id":"virtio-serial0","bus":"pci.2","addr":"0x0"}' \ -blockdev '{"driver":"file","filename":"/mnt/user/domains/Windows 10/vdisk1.img","node-name":"libvirt-3-storage","cache":{"direct":false,"no-flush":false},"auto-read-only":true,"discard":"unmap"}' \ -blockdev '{"node-name":"libvirt-3-format","read-only":false,"cache":{"direct":false,"no-flush":false},"driver":"raw","file":"libvirt-3-storage"}' \ -device '{"driver":"virtio-blk-pci","bus":"pci.4","addr":"0x0","drive":"libvirt-3-format","id":"virtio-disk2","bootindex":1,"write-cache":"on"}' \ -blockdev '{"driver":"file","filename":"/mnt/user/isos/Win10_21H2_German_x64.iso","node-name":"libvirt-2-storage","auto-read-only":true,"discard":"unmap"}' \ -blockdev '{"node-name":"libvirt-2-format","read-only":true,"driver":"raw","file":"libvirt-2-storage"}' \ -device '{"driver":"ide-cd","bus":"ide.0","drive":"libvirt-2-format","id":"sata0-0-0","bootindex":2}' \ -blockdev '{"driver":"file","filename":"/mnt/user/isos/virtio-win-0.1.190-1.iso","node-name":"libvirt-1-storage","auto-read-only":true,"discard":"unmap"}' \ -blockdev '{"node-name":"libvirt-1-format","read-only":true,"driver":"raw","file":"libvirt-1-storage"}' \ -device '{"driver":"ide-cd","bus":"ide.1","drive":"libvirt-1-format","id":"sata0-0-1"}' \ -netdev tap,fd=36,id=hostnet0 \ -device '{"driver":"virtio-net","netdev":"hostnet0","id":"net0","mac":"52:54:00:df:a4:65","bus":"pci.3","addr":"0x0"}' \ -chardev pty,id=charserial0 \ -device '{"driver":"isa-serial","chardev":"charserial0","id":"serial0"}' \ -chardev socket,id=charchannel0,fd=37,server=on,wait=off \ -device '{"driver":"virtserialport","bus":"virtio-serial0.0","nr":1,"chardev":"charchannel0","id":"channel0","name":"org.qemu.guest_agent.0"}' \ -device '{"driver":"usb-tablet","id":"input0","bus":"usb.0","port":"1"}' \ -audiodev '{"id":"audio1","driver":"none"}' \ -device '{"driver":"vfio-pci","host":"0000:07:00.0","id":"hostdev0","bus":"pci.7","multifunction":true,"addr":"0x1","romfile":"/mnt/user/vbios/XFX.RX580.8192.190920.rom"}' \ -device '{"driver":"vfio-pci","host":"0000:07:00.1","id":"hostdev1","bus":"pci.7","addr":"0x1.0x1"}' \ -sandbox on,obsolete=deny,elevateprivileges=deny,spawn=deny,resourcecontrol=deny \ -msg timestamp=on char device redirected to /dev/pts/0 (label charserial0) 2022-03-20T11:36:33.057995Z qemu-system-x86_64: vfio: Unable to power on device, stuck in D3 2022-03-20T11:36:33.067399Z qemu-system-x86_64: vfio: Unable to power on device, stuck in D3 2022-03-20T11:36:33.247269Z qemu-system-x86_64: vfio_err_notifier_handler(0000:07:00.1) Unrecoverable error detected. Please collect any data possible and then kill the guest 2022-03-20T11:36:33.247346Z qemu-system-x86_64: vfio_err_notifier_handler(0000:07:00.0) Unrecoverable error detected. Please collect any data possible and then kill the guest 2022-03-20T11:36:34.246024Z qemu-system-x86_64: vfio_err_notifier_handler(0000:07:00.0) Unrecoverable error detected. Please collect any data possible and then kill the guest 2022-03-20T11:36:34.401245Z qemu-system-x86_64: vfio_err_notifier_handler(0000:07:00.1) Unrecoverable error detected. Please collect any data possible and then kill the guest 2022-03-20T11:36:50.298915Z qemu-system-x86_64: terminating on signal 15 from pid 3469 (/usr/sbin/libvirtd) 2022-03-20 11:36:52.501+0000: shutting down, reason=destroyed 2022-03-20 11:37:26.268+0000: shutting down, reason=failed Die Windows 10 VM Config: <?xml version='1.0' encoding='UTF-8'?> <domain type='kvm'> <name>Windows 10</name> <uuid>ba800835-6a60-2540-766a-6dc1a4603c67</uuid> <metadata> <vmtemplate xmlns="unraid" name="Windows 10" icon="windows.png" os="windows10"/> </metadata> <memory unit='KiB'>10485760</memory> <currentMemory unit='KiB'>10485760</currentMemory> <memoryBacking> <nosharepages/> </memoryBacking> <vcpu placement='static'>8</vcpu> <cputune> <vcpupin vcpu='0' cpuset='0'/> <vcpupin vcpu='1' cpuset='8'/> <vcpupin vcpu='2' cpuset='1'/> <vcpupin vcpu='3' cpuset='9'/> <vcpupin vcpu='4' cpuset='2'/> <vcpupin vcpu='5' cpuset='10'/> <vcpupin vcpu='6' cpuset='3'/> <vcpupin vcpu='7' cpuset='11'/> </cputune> <os> <type arch='x86_64' machine='pc-q35-5.1'>hvm</type> <loader readonly='yes' type='pflash'>/usr/share/qemu/ovmf-x64/OVMF_CODE-pure-efi.fd</loader> <nvram>/etc/libvirt/qemu/nvram/ba800835-6a60-2540-766a-6dc1a4603c67_VARS-pure-efi.fd</nvram> </os> <features> <acpi/> <apic/> <hyperv> <relaxed state='on'/> <vapic state='on'/> <spinlocks state='on' retries='8191'/> <vendor_id state='on' value='none'/> </hyperv> </features> <cpu mode='host-passthrough' check='none' migratable='on'> <topology sockets='1' dies='1' cores='4' threads='2'/> <cache mode='passthrough'/> <feature policy='require' name='topoext'/> </cpu> <clock offset='localtime'> <timer name='hypervclock' present='yes'/> <timer name='hpet' present='no'/> </clock> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/local/sbin/qemu</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw' cache='writeback'/> <source file='/mnt/user/domains/Windows 10/vdisk1.img'/> <target dev='hdc' bus='virtio'/> <boot order='1'/> <address type='pci' domain='0x0000' bus='0x04' slot='0x00' function='0x0'/> </disk> <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <source file='/mnt/user/isos/Win10_21H2_German_x64.iso'/> <target dev='hda' bus='sata'/> <readonly/> <boot order='2'/> <address type='drive' controller='0' bus='0' target='0' unit='0'/> </disk> <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <source file='/mnt/user/isos/virtio-win-0.1.190-1.iso'/> <target dev='hdb' bus='sata'/> <readonly/> <address type='drive' controller='0' bus='0' target='0' unit='1'/> </disk> <controller type='usb' index='0' model='ich9-ehci1'> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x7'/> </controller> <controller type='usb' index='0' model='ich9-uhci1'> <master startport='0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0' multifunction='on'/> </controller> <controller type='usb' index='0' model='ich9-uhci2'> <master startport='2'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x1' multifunction='on'/> </controller> <controller type='usb' index='0' model='ich9-uhci3'> <master startport='4'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x2'/> </controller> <controller type='pci' index='0' model='pcie-root'/> <controller type='pci' index='1' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='1' port='0x8'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x0' multifunction='on'/> </controller> <controller type='pci' index='2' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='2' port='0x9'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> </controller> <controller type='pci' index='3' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='3' port='0x12'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x2'/> </controller> <controller type='pci' index='4' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='4' port='0x13'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x3'/> </controller> <controller type='pci' index='5' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='5' port='0x14'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x4'/> </controller> <controller type='pci' index='6' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='6' port='0xa'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x2'/> </controller> <controller type='pci' index='7' model='pcie-to-pci-bridge'> <model name='pcie-pci-bridge'/> <address type='pci' domain='0x0000' bus='0x01' slot='0x00' function='0x0'/> </controller> <controller type='virtio-serial' index='0'> <address type='pci' domain='0x0000' bus='0x02' slot='0x00' function='0x0'/> </controller> <controller type='sata' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x1f' function='0x2'/> </controller> <interface type='bridge'> <mac address='52:54:00:df:a4:65'/> <source bridge='br0'/> <model type='virtio-net'/> <address type='pci' domain='0x0000' bus='0x03' slot='0x00' function='0x0'/> </interface> <serial type='pty'> <target type='isa-serial' port='0'> <model name='isa-serial'/> </target> </serial> <console type='pty'> <target type='serial' port='0'/> </console> <channel type='unix'> <target type='virtio' name='org.qemu.guest_agent.0'/> <address type='virtio-serial' controller='0' bus='0' port='1'/> </channel> <input type='tablet' bus='usb'> <address type='usb' bus='0' port='1'/> </input> <input type='mouse' bus='ps2'/> <input type='keyboard' bus='ps2'/> <audio id='1' type='none'/> <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x07' slot='0x00' function='0x0'/> </source> <rom file='/mnt/user/vbios/XFX.RX580.8192.190920.rom'/> <address type='pci' domain='0x0000' bus='0x07' slot='0x01' function='0x0' multifunction='on'/> </hostdev> <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x07' slot='0x00' function='0x1'/> </source> <address type='pci' domain='0x0000' bus='0x07' slot='0x01' function='0x1'/> </hostdev> <memballoon model='none'/> </devices> </domain> Quote wonderland-diagnostics-20220320-1246.zip Quote Link to comment
TechElch Posted March 24, 2022 Author Share Posted March 24, 2022 On 3/19/2022 at 4:00 PM, mgutt said: Mehr Input bitte. An vfio gebunden? VM Config sieht wie aus? An vfio binden hat keinen unterschied gemacht. :) Quote Link to comment
ich777 Posted March 25, 2022 Share Posted March 25, 2022 14 hours ago, TechElch said: An vfio binden hat keinen unterschied gemacht. Bitte update dein AMD-Vendor-Reset plugin und reboote. Deine Version: 2021.06.23 Aktuelle Version: 2022.03.21 Quote Link to comment
TechElch Posted March 25, 2022 Author Share Posted March 25, 2022 (edited) 1 hour ago, ich777 said: Bitte update dein AMD-Vendor-Reset plugin und reboote. Deine Version: 2021.06.23 Aktuelle Version: 2022.03.21 Jo hab ich gemacht, jetzt ist es ein neuer Fehler anscheinend bekommt vfio die Sound Komponente nicht resettet.. Hier der VM-LOG: -device '{"driver":"usb-tablet","id":"input0","bus":"usb.0","port":"1"}' \ -audiodev '{"id":"audio1","driver":"none"}' \ -device '{"driver":"vfio-pci","host":"0000:07:00.0","id":"hostdev0","bus":"pci.5","addr":"0x0"}' \ -device '{"driver":"vfio-pci","host":"0000:07:00.1","id":"hostdev1","bus":"pci.6","addr":"0x0"}' \ -sandbox on,obsolete=deny,elevateprivileges=deny,spawn=deny,resourcecontrol=deny \ -msg timestamp=on char device redirected to /dev/pts/0 (label charserial0) 2022-03-25T07:51:42.875079Z qemu-system-x86_64: vfio: Cannot reset device 0000:07:00.1, no available reset mechanism. 2022-03-25T07:51:42.879012Z qemu-system-x86_64: vfio: Cannot reset device 0000:07:00.1, no available reset mechanism. 2022-03-25T07:57:28.671952Z qemu-system-x86_64: terminating on signal 15 from pid 4364 (/usr/sbin/libvirtd) 2022-03-25 07:57:29.072+0000: shutting down, reason=destroyed 2022-03-25 08:12:23.585+0000: starting up libvirt version: 7.10.0, qemu version: 6.2.0, kernel: 5.15.30-Unraid, hostname: Wonderland LC_ALL=C \ PATH=/bin:/sbin:/usr/bin:/usr/sbin \ HOME='/var/lib/libvirt/qemu/domain-3-Windows 10' \ XDG_DATA_HOME='/var/lib/libvirt/qemu/domain-3-Windows 10/.local/share' \ XDG_CACHE_HOME='/var/lib/libvirt/qemu/domain-3-Windows 10/.cache' \ XDG_CONFIG_HOME='/var/lib/libvirt/qemu/domain-3-Windows 10/.config' \ /usr/local/sbin/qemu \ -name 'guest=Windows 10,debug-threads=on' \ -S \ -object '{"qom-type":"secret","id":"masterKey0","format":"raw","file":"/var/lib/libvirt/qemu/domain-3-Windows 10/master-key.aes"}' \ -blockdev '{"driver":"file","filename":"/usr/share/qemu/ovmf-x64/OVMF_CODE-pure-efi.fd","node-name":"libvirt-pflash0-storage","auto-read-only":true,"discard":"unmap"}' \ -blockdev '{"node-name":"libvirt-pflash0-format","read-only":true,"driver":"raw","file":"libvirt-pflash0-storage"}' \ -blockdev '{"driver":"file","filename":"/etc/libvirt/qemu/nvram/ba800835-6a60-2540-766a-6dc1a4603c67_VARS-pure-efi.fd","node-name":"libvirt-pflash1-storage","auto-read-only":true,"discard":"unmap"}' \ -blockdev '{"node-name":"libvirt-pflash1-format","read-only":false,"driver":"raw","file":"libvirt-pflash1-storage"}' \ -machine pc-q35-6.2,usb=off,dump-guest-core=off,mem-merge=off,pflash0=libvirt-pflash0-format,pflash1=libvirt-pflash1-format,memory-backend=pc.ram \ -accel kvm \ -cpu host,migratable=on,topoext=on,hv-time=on,hv-relaxed=on,hv-vapic=on,hv-spinlocks=0x1fff,hv-vendor-id=none,host-cache-info=on,l3-cache=off \ -m 10240 \ -object '{"qom-type":"memory-backend-ram","id":"pc.ram","size":10737418240}' \ -overcommit mem-lock=off \ -smp 8,sockets=1,dies=1,cores=4,threads=2 \ -uuid ba800835-6a60-2540-766a-6dc1a4603c67 \ -display none \ -no-user-config \ -nodefaults \ -chardev socket,id=charmonitor,fd=34,server=on,wait=off \ -mon chardev=charmonitor,id=monitor,mode=control \ -rtc base=localtime \ -no-hpet \ -no-shutdown \ -boot strict=on \ -device '{"driver":"pcie-root-port","port":8,"chassis":1,"id":"pci.1","bus":"pcie.0","multifunction":true,"addr":"0x1"}' \ -device '{"driver":"pcie-root-port","port":9,"chassis":2,"id":"pci.2","bus":"pcie.0","addr":"0x1.0x1"}' \ -device '{"driver":"pcie-root-port","port":12,"chassis":3,"id":"pci.3","bus":"pcie.0","addr":"0x1.0x4"}' \ -device '{"driver":"pcie-root-port","port":19,"chassis":4,"id":"pci.4","bus":"pcie.0","addr":"0x2.0x3"}' \ -device '{"driver":"pcie-root-port","port":20,"chassis":5,"id":"pci.5","bus":"pcie.0","addr":"0x2.0x4"}' \ -device '{"driver":"pcie-root-port","port":10,"chassis":6,"id":"pci.6","bus":"pcie.0","addr":"0x1.0x2"}' \ -device '{"driver":"pcie-pci-bridge","id":"pci.7","bus":"pci.1","addr":"0x0"}' \ -device '{"driver":"pcie-root-port","port":11,"chassis":8,"id":"pci.8","bus":"pcie.0","addr":"0x1.0x3"}' \ -device '{"driver":"ich9-usb-ehci1","id":"usb","bus":"pcie.0","addr":"0x7.0x7"}' \ -device '{"driver":"ich9-usb-uhci1","masterbus":"usb.0","firstport":0,"bus":"pcie.0","multifunction":true,"addr":"0x7"}' \ -device '{"driver":"ich9-usb-uhci2","masterbus":"usb.0","firstport":2,"bus":"pcie.0","addr":"0x7.0x1"}' \ -device '{"driver":"ich9-usb-uhci3","masterbus":"usb.0","firstport":4,"bus":"pcie.0","addr":"0x7.0x2"}' \ -device '{"driver":"virtio-serial-pci","id":"virtio-serial0","bus":"pci.2","addr":"0x0"}' \ -blockdev '{"driver":"file","filename":"/mnt/user/domains/Windows 10/vdisk1.img","node-name":"libvirt-3-storage","cache":{"direct":false,"no-flush":false},"auto-read-only":true,"discard":"unmap"}' \ -blockdev '{"node-name":"libvirt-3-format","read-only":false,"cache":{"direct":false,"no-flush":false},"driver":"raw","file":"libvirt-3-storage"}' \ -device '{"driver":"virtio-blk-pci","bus":"pci.4","addr":"0x0","drive":"libvirt-3-format","id":"virtio-disk2","bootindex":1,"write-cache":"on"}' \ -blockdev '{"driver":"file","filename":"/mnt/user/isos/Win10_21H2_German_x64.iso","node-name":"libvirt-2-storage","auto-read-only":true,"discard":"unmap"}' \ -blockdev '{"node-name":"libvirt-2-format","read-only":true,"driver":"raw","file":"libvirt-2-storage"}' \ -device '{"driver":"ide-cd","bus":"ide.0","drive":"libvirt-2-format","id":"sata0-0-0","bootindex":2}' \ -blockdev '{"driver":"file","filename":"/mnt/user/isos/virtio-win-0.1.190-1.iso","node-name":"libvirt-1-storage","auto-read-only":true,"discard":"unmap"}' \ -blockdev '{"node-name":"libvirt-1-format","read-only":true,"driver":"raw","file":"libvirt-1-storage"}' \ -device '{"driver":"ide-cd","bus":"ide.1","drive":"libvirt-1-format","id":"sata0-0-1"}' \ -netdev tap,fd=36,id=hostnet0 \ -device '{"driver":"virtio-net","netdev":"hostnet0","id":"net0","mac":"52:54:00:df:a4:65","bus":"pci.3","addr":"0x0"}' \ -chardev pty,id=charserial0 \ -device '{"driver":"isa-serial","chardev":"charserial0","id":"serial0"}' \ -chardev socket,id=charchannel0,fd=37,server=on,wait=off \ -device '{"driver":"virtserialport","bus":"virtio-serial0.0","nr":1,"chardev":"charchannel0","id":"channel0","name":"org.qemu.guest_agent.0"}' \ -device '{"driver":"usb-tablet","id":"input0","bus":"usb.0","port":"1"}' \ -audiodev '{"id":"audio1","driver":"none"}' \ -device '{"driver":"vfio-pci","host":"0000:07:00.0","id":"hostdev0","bus":"pci.5","multifunction":true,"addr":"0x0"}' \ -device '{"driver":"vfio-pci","host":"0000:07:00.1","id":"hostdev1","bus":"pci.5","addr":"0x0.0x1"}' \ -sandbox on,obsolete=deny,elevateprivileges=deny,spawn=deny,resourcecontrol=deny \ -msg timestamp=on char device redirected to /dev/pts/0 (label charserial0) 2022-03-25T08:12:25.179905Z qemu-system-x86_64: vfio: Cannot reset device 0000:07:00.1, no available reset mechanism. 2022-03-25T08:12:25.183881Z qemu-system-x86_64: vfio: Cannot reset device 0000:07:00.1, no available reset mechanism. PS: Vielen dank erstmal für deine Hilfe Edited March 25, 2022 by TechElch Quote Link to comment
ich777 Posted March 25, 2022 Share Posted March 25, 2022 4 minutes ago, TechElch said: Jo hab ich gemacht, jetzt ist es ein neuer Fehler anscheinend bekommt vfio die Sound Komponente nicht resettet.. Hier der VM-LOG: Hast du die Karte denn an VFIO gebunden, in deinen Diagnostics oben ist sie nicht an VFIO gebunden. Bitte nochmal Diagnostics wenn möglich. Und dieses Kommando vom Unraid Terminal ausführen bitte und den Output posten: cat $(find /sys/bus/pci/devices/* -name "*$(lspci -nn | grep -E "VGA compatible controller|Display controller" | grep -E "AMD|ATI|Advanced Micro Devices" | awk '{print $1}')")/reset_method Quote Link to comment
TechElch Posted March 25, 2022 Author Share Posted March 25, 2022 3 minutes ago, ich777 said: Hast du die Karte denn an VFIO gebunden, in deinen Diagnostics oben ist sie nicht an VFIO gebunden. Bitte nochmal Diagnostics wenn möglich. Und dieses Kommando vom Unraid Terminal ausführen bitte und den Output posten: cat $(find /sys/bus/pci/devices/* -name "*$(lspci -nn | grep -E "VGA compatible controller|Display controller" | grep -E "AMD|ATI|Advanced Micro Devices" | awk '{print $1}')")/reset_method Ja die Karte ist ans VFIO gebunden, ich glaube bei dem Kommando ist irgendwas schiefgelaufen.. cat $(find /sys/bus/pci/devices/* -name "*$(lspci -nn | grep -E "VGA compatible controller|Display controller" | grep -E "AMD|ATI|Advanced Micro Devices" | awk '{print $1}')")/reset_method device_specific wonderland-diagnostics-20220325-0923.zip Quote Link to comment
ich777 Posted March 25, 2022 Share Posted March 25, 2022 9 minutes ago, TechElch said: ich glaube bei dem Kommando ist irgendwas schiefgelaufen.. Warum, passt doch, hat doch das ausgegeben: device_specific (das war genau was ich wissen wollte) Es kann auch gut möglich sein das deine Karte nicht resetted werden kann, der Vendor Reset ist nur ein Workaround und keine wirkliche Lösung. Du kannst auch versuchen mal "PCIe ACS override" auf Multi Functional umzustellen bzw. dort mal rum zu probieren. EDIT: Bekommst du eigentlich eine Ausgabe vom Unraid Terminal auf der Karte? Es kann auch gut sein das weil du nur eine Karte eingebaut hast nicht funktioniert, ist immer mit ein bisschen Risiko behaftet, sieh auch nochmal im BIOS nach ob du irgendwelche optionen für Virtualisierung hast und ob die richtig gesetzt sind. Quote Link to comment
TechElch Posted March 25, 2022 Author Share Posted March 25, 2022 3 hours ago, ich777 said: Warum, passt doch, hat doch das ausgegeben: device_specific (das war genau was ich wissen wollte) Es kann auch gut möglich sein das deine Karte nicht resetted werden kann, der Vendor Reset ist nur ein Workaround und keine wirkliche Lösung. Du kannst auch versuchen mal "PCIe ACS override" auf Multi Functional umzustellen bzw. dort mal rum zu probieren. EDIT: Bekommst du eigentlich eine Ausgabe vom Unraid Terminal auf der Karte? Es kann auch gut sein das weil du nur eine Karte eingebaut hast nicht funktioniert, ist immer mit ein bisschen Risiko behaftet, sieh auch nochmal im BIOS nach ob du irgendwelche optionen für Virtualisierung hast und ob die richtig gesetzt sind. ACS Override auf multifunction war auch mein erster Gedanke, hat leider nichts gebracht. Ich bekomme eine Ausgabe des Unraid Terminals bis meine Karte an vfio gebunden wird. Im Bios ist mir dann aufgefallen dass das 'above 4g mmio' noch ausgeschaltet war, allerdings hat auch das nicht geholfen. Ich versuche später noch mal meine gt710 als Primäre Karte und meine rx580 auf den zweiten Steckplatz. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.