abzkebabs Posted May 18, 2022 Share Posted May 18, 2022 Hi Guys, I'm a new UNRAID user but have upgraded my license and purchased an LSI SAS card to install severall more drives. Currently I have 3 X 8TB with one being the parity drive and all running from the MOBO's internal SATA controller. When the LSI card arrives is there anything I need to take note or do when swapping them over? Or should I leave the current drives on the SATA controller and only plug the new ons in to the SAS card? Any advice would be appreciated. Quote Link to comment
Solution ChatNoir Posted May 18, 2022 Solution Share Posted May 18, 2022 Unraid assigns drives by Serial Number. The position on one controller or another is not important. Quote Link to comment
JorgeB Posted May 18, 2022 Share Posted May 18, 2022 Just make sure the controller is using the latest IT firmware. Quote Link to comment
abzkebabs Posted May 19, 2022 Author Share Posted May 19, 2022 17 hours ago, ChatNoir said: Unraid assigns drives by Serial Number. The position on one controller or another is not important. Thank you, thats good to know! Quote Link to comment
abzkebabs Posted May 19, 2022 Author Share Posted May 19, 2022 16 hours ago, JorgeB said: Just make sure the controller is using the latest IT firmware. Thanks! The seller I have purchased off has already flashed it but I will confirm it's the latest version before I put it into production. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.