SDC82 Posted June 3, 2022 Share Posted June 3, 2022 Good Afternoon, I really hope somebody is able to help me out here as I'm banging my head. I'll do my best to layout all that I'm aware of, and all I did that probably made it worse. Everything was plugging away fine this afternoon and seemingly stopped responding with all docker interfaces. I was seeing errors which said the drive was read only, which lead me to believe it was a disk issue. I popped in another SSD, named it "newcache" and copied directories from the old to the new. I then changed all the shares from cache to new cache. This did not seem to help. I then ran a restore from backup, and a few containers started but didn't seem to work. Browsing the File System from the GUI shows only user0. When I open Midnight Commander I see the below screen shot with user? Somewhere in the course of the day I went up to 6.10.2 and back down, so hopefully didn't make it worse. Diagnostics included. bignas-diagnostics-20220603-1707.zip Quote Link to comment
Squid Posted June 3, 2022 Share Posted June 3, 2022 Jun 3 16:58:29 BigNAS kernel: BTRFS critical (device nvme0n1p1): unable to find logical 14057987492005150720 length 4096 Jun 3 16:58:29 BigNAS kernel: BTRFS critical (device nvme0n1p1): unable to find logical 14057987492005150720 length 16384 Wait for @JorgeB to advise Quote Link to comment
JorgeB Posted June 4, 2022 Share Posted June 4, 2022 First thing I would recommend is to stop overclocking the RAM, see here for max speed depending on config, 1866MT/s in your case, Ryzen with overclock RAM is known to in some cases corrupt data. As for the pool best bet for the pool is to backup and re-format the device, then restore the data. Quote Link to comment
Solution SDC82 Posted June 4, 2022 Author Solution Share Posted June 4, 2022 RAM is not overclocked to my knowledge. If it is, it was default on the mobo as I've never changed it. I have finally got back online and what a long journey it was. New Cache New Flash Restore Cache from backup Change Docker from File Folder to disk image Recreate docker images Some shares would still not create, appear as though the file exists but not accessible and could not mkdir. Created those shares under new names and modify docker accordingly. No data loss other than most recent downloads and tdarr work in progress. Once I get brave I'm going to stop the array again and format the original cache and if it's working I'll test it as my tdarr dir. Quote Link to comment
JorgeB Posted June 5, 2022 Share Posted June 5, 2022 16 hours ago, SDC82 said: RAM is not overclocked to my knowledge It is, or I wouldn't mention that, it's set at 2133MT/s, it should be at 1866MT/s, see the link above. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.