VIDEOMED Posted June 23, 2022 Share Posted June 23, 2022 Adding a new drive to UNRAID My UNRAID server for only 1 D1 disk + 1 DP1 parity disk I want to add an additional D2 data disk. Is it possible to connect the D2 disk with data already on it. Whether the data from D2 will be kept I have no experience with UNRAID. I am afraid that I will lose the data, please give me a detailed instruction. Quote Link to comment
Squid Posted June 23, 2022 Share Posted June 23, 2022 If you already have a parity drive, then the data on D2 will be lost. Without a parity drive installed, data on D2 will be lost if it's not formatted as XFS / BTRFS / ReiserFS Presumably this drive has data on it from Windows (formatted NTFS), so you'd need another drive to add as D2 and then transfer the data over to it either through the network or by mounting the disk with the Unassigned Devices plugin Quote Link to comment
JorgeB Posted June 23, 2022 Share Posted June 23, 2022 When parity is installed Unraid will clear (wipe) any disk assigned to the array, if there's no parity no clearing will be done, but even in that case you'd only be able to use a disk previously formatted by Unraid or the UD plugin. Quote Link to comment
VIDEOMED Posted June 23, 2022 Author Share Posted June 23, 2022 I have 2 questions A. Can I connect a blank D2 disk. Format it as XFS / BTRFS / ReiserFS then add it to array and run parity. Will the data from D1 be lost? B. Can I attach D2 disk previously used in another UNRAID server (BTRFS) add to Array and run parity. Will the D2 data be kept? How to modify SHARES? Quote Link to comment
JorgeB Posted June 23, 2022 Share Posted June 23, 2022 4 minutes ago, VIDEOMED said: A. Can I connect a blank D2 disk. Format it as XFS / BTRFS / ReiserFS then add it to array and run parity. Will the data from D1 be lost? You can if the disk is formatted by UD, then you's need to do a new config (tools -> new config) and re-sync parity, data in disks 1 and 2 would remain. 5 minutes ago, VIDEOMED said: B. Can I attach D2 disk previously used in another UNRAID server (BTRFS) add to Array and run parity. Will the D2 data be kept? Again yes if you do a new config first the re-sync parity. 6 minutes ago, VIDEOMED said: How to modify SHARES? All existing top level folder would be shares, using the default settings. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.