Pstark Posted August 8, 2022 Share Posted August 8, 2022 I was looking around my server looking for reasons that might make it become unresponsive seeming randomly. I think that may cause an issue but I'm not sure how to fix it. It said 99.9% utilized before I started the mover. At 99.9% utilization, the MAIN tab says roughly 50% utilization. My question is do I have this set up right? It seems I'm only using half of each drive. I see I have 8 blocks uncorrectable but how do I fix this? Quote Link to comment
trurl Posted August 8, 2022 Share Posted August 8, 2022 attach diagnostics to your NEXT post in this thread Quote Link to comment
Pstark Posted August 8, 2022 Author Share Posted August 8, 2022 36 minutes ago, trurl said: attach diagnostics to your NEXT post in this thread face palm... tower-diagnostics-20220807-1142.zip Quote Link to comment
JorgeB Posted August 8, 2022 Share Posted August 8, 2022 4 hours ago, Pstark said: that might make it become unresponsive seeming randomly. Switching to ipvlan should fix it (Settings -> Docker Settings -> Docker custom network type -> ipvlan (advanced view must be enable, top right)). 4 hours ago, Pstark said: It said 99.9% utilized before I started the mover. What said that? Cache is about 50% used at the moment. 4 hours ago, Pstark said: I see I have 8 blocks uncorrectable but how do I fix this? Look at the syslog after a scrub and delete/restore the corrupt files, also a good idea to run memtest. Quote Link to comment
Pstark Posted August 8, 2022 Author Share Posted August 8, 2022 34 minutes ago, JorgeB said: What said that? Cache is about 50% used at the moment After clicking the cache drive and under balance status it said 99.9% utilized. I then started the mover and it went down to where it's at now. I also changed the block group usage to 100 thinking that is how much of the drive to use but correct me if I'm wrong. 37 minutes ago, JorgeB said: Switching to ipvlan should fix it (Settings -> Docker Settings -> Docker custom network type -> ipvlan (advanced view must be enable, top right)). Did this and will report back if it helps or not. Quote Link to comment
JorgeB Posted August 8, 2022 Share Posted August 8, 2022 4 minutes ago, Pstark said: After clicking the cache drive and under balance status it said 99.9% utilized. That's not about data, it's about unallocated space, the higher the utilization the better for that. Quote Link to comment
Pstark Posted August 9, 2022 Author Share Posted August 9, 2022 23 hours ago, JorgeB said: Switching to ipvlan should fix it (Settings -> Docker Settings -> Docker custom network type -> ipvlan (advanced view must be enable, top right)). So far it's been ~24 hours and no lockups after doing this. I will add that I also changed the mover to run hourly. I will test this for about a week and change it back to every 6 hours to see if the issue returns. 23 hours ago, JorgeB said: Look at the syslog after a scrub and delete/restore the corrupt files I attempted this but it was unsure on how to interpret the log file. Quote Link to comment
JorgeB Posted August 9, 2022 Share Posted August 9, 2022 1 hour ago, Pstark said: I attempted this but it was unsure on how to interpret the log file. Post new diags after a scrub. Quote Link to comment
Pstark Posted August 11, 2022 Author Share Posted August 11, 2022 On 8/8/2022 at 10:40 PM, JorgeB said: Post new diags after a scrub. Here hey are. tower-diagnostics-20220811-0612.zip Quote Link to comment
JorgeB Posted August 11, 2022 Share Posted August 11, 2022 Multiple errors but they just affect one file: Aug 11 06:09:09 Tower kernel: BTRFS warning (device nvme1n1p1): checksum error at logical 658747006976 on dev /dev/nvme1n1p1, physical 395688648704, root 5, inode 482653, offset 9145081856, length 4096, links 1 (path: data/media/movies/Doctor Strange in the Multiverse of Madness (2022)/Doctor.Strange.in.the.Multiverse.of.Madness.2022.4K.HDR.DV.2160p.BDRemux Ita Eng x265-NAHOM.mkv) Delete/restore that file from backups. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.