Kiwiconcord Posted September 18, 2022 Share Posted September 18, 2022 Over the last week I have had one parity and one array disk fail, I have tried to rebuild the currently drives as SMART was not showing any issues, both failed, I have switched cables and sata ports, still no luck. I have purchased 2 band new drives, I have managed to rebuild disk 4 of the array with a new drive, but Parity 1 still failing not sure why? Plus I have pulled the old drives out and put in another machine and run diagnostics and the drives are reporting as good?? Any thoughts? kaha-diagnostics-20220918-0958.zip Quote Link to comment
trurl Posted September 18, 2022 Share Posted September 18, 2022 Looks like parity disconnected as sdd and reconnected as sdi Connection problems on both parity and disk4, they are on different controllers. How are these connected to power? Quote Link to comment
Kiwiconcord Posted September 18, 2022 Author Share Posted September 18, 2022 All drives connected to onboard controller, power wise they are connected directly to power supply no add on connectors (learnt that lesson early). Quote Link to comment
JorgeB Posted September 18, 2022 Share Posted September 18, 2022 Looks more like a power problem, could be the PSU. Quote Link to comment
Solution Kiwiconcord Posted September 19, 2022 Author Solution Share Posted September 19, 2022 I am starting to think the same way, I have put in a new PSU and upped the wattage, and not only are the drives now working but the parity sync is running much faster than previously which I am not sure how that is possible but it performance is up by about 25-30%. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.