scurrie20 Posted October 5, 2022 Share Posted October 5, 2022 I've been using Unraid for a while and need to upgrade my machine to accommodate more drives. I've flashed the H710p mini to IT mode and all seems to load up fine in the new machine but I am unable to access the server via the GUI. Any help would be greatly appreciated. Cheers Quote Link to comment
JorgeB Posted October 5, 2022 Share Posted October 5, 2022 Please post the diagnostics. Quote Link to comment
scurrie20 Posted October 6, 2022 Author Share Posted October 6, 2022 I'm not sure how to do this in the command line, any idea? Quote Link to comment
ChatNoir Posted October 6, 2022 Share Posted October 6, 2022 13 minutes ago, scurrie20 said: I'm not sure how to do this in the command line, any idea? That's explained in the link. Simply type diagnostics on the commande line, the file will be created in the log directory of the flashdrive. Quote Link to comment
scurrie20 Posted October 6, 2022 Author Share Posted October 6, 2022 Great, thanks. sb2-diagnostics-20221006-1736.zip Quote Link to comment
JorgeB Posted October 6, 2022 Share Posted October 6, 2022 No link is being detected on any of your NICs, check cables/connections. Quote Link to comment
scurrie20 Posted October 6, 2022 Author Share Posted October 6, 2022 Thanks, I'm getting activity lights on both the switch and NICs, tested cables on other machines and they work fine. Any idea what I'm missing? Quote Link to comment
JorgeB Posted October 6, 2022 Share Posted October 6, 2022 Link detected: no Until the NICs detect a link they won't work, you can boot using the GUI mode, it might help to ckeck/set the lan config. Quote Link to comment
scurrie20 Posted October 6, 2022 Author Share Posted October 6, 2022 I've tried booting into both the GUI and GUI Safe mode and end up with a blank screen.... Appreciate your help Quote Link to comment
JorgeB Posted October 6, 2022 Share Posted October 6, 2022 That's a known issue with servers using a Matrox GPU, it will be fixed for v6.11.1, if you want for now you can downgrade to v6.10.3, it works there. Quote Link to comment
scurrie20 Posted October 6, 2022 Author Share Posted October 6, 2022 Worked a treat, but am now having another issue. Let me know what I've stuffed up here. Cheers sb2-diagnostics-20221006-2225.zip Quote Link to comment
scurrie20 Posted October 7, 2022 Author Share Posted October 7, 2022 Drives are showing up as "wrong", and the array can't start Quote Link to comment
JorgeB Posted October 7, 2022 Share Posted October 7, 2022 You can do a new config to fix that, but since v6.11.1 is available update first in case the names change again. Quote Link to comment
scurrie20 Posted October 7, 2022 Author Share Posted October 7, 2022 So I just run the new config with Preserve current assignments selected to "All" and I won't lose any data? Quote Link to comment
scurrie20 Posted October 7, 2022 Author Share Posted October 7, 2022 Sorry for all the questions, just scared to lose the data Quote Link to comment
Solution JorgeB Posted October 7, 2022 Solution Share Posted October 7, 2022 26 minutes ago, scurrie20 said: So I just run the new config with Preserve current assignments selected to "All" and I won't lose any data? Correct, and check "parity is already valid" before array start, but like mentioned you should update first. Quote Link to comment
scurrie20 Posted October 7, 2022 Author Share Posted October 7, 2022 Thanks for all your help! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.