squirreltats Posted December 3, 2022 Share Posted December 3, 2022 (edited) My Unraid server will not connect to the LAN or the WAN. I have tried many different solution that I found on Reddit and Unraid forum. I am currently running it on the GUI Mode through IPMI but there are no other ways of using/connecting to it. It first started when I was trying to get the LanCache docker to work. It first stopped connected to the WAN. Then as I was messing with the DNS it stopped connecting to the LAN. I reset the network settings, I reset the reservations on my router, gave it new ip addresses, reset the nics/network settings through CLI and the boot file. I replaced the Ethernet cable, tried different ports on the switch. All external hardware like wires and switches are working fine. Many thanks in advance. Motherboard: Supermicro X11SSM-F CPU: Intel Xeon E3-1240L 16gb RAM dhcplog.txt syslog.txt Edited December 6, 2022 by squirreltats Quote Link to comment
trurl Posted December 3, 2022 Share Posted December 3, 2022 attach diagnostics to your NEXT post in this thread Quote Link to comment
squirreltats Posted December 3, 2022 Author Share Posted December 3, 2022 (edited) 3 hours ago, trurl said: attach diagnostics to your NEXT post in this thread I've noticed when I throw the thumbdrive into my windows machine, it shows the incorrect time (about five hours ahead). emily-diagnostics-20221203-1740.zip Edited December 4, 2022 by squirreltats Quote Link to comment
JorgeB Posted December 4, 2022 Share Posted December 4, 2022 Disable or set eth1 and eth2 to different subnets, also only assign a gateway to eth0. Quote Link to comment
squirreltats Posted December 4, 2022 Author Share Posted December 4, 2022 9 hours ago, JorgeB said: Disable or set eth1 and eth2 to different subnets, also only assign a gateway to eth0. I did as you suggested and disabled eth1 (eth2 has not been in use for some time), That solved my LAN issue, but not my WAN issue. 1 out of 2 solved. Many thanks for that. emily-diagnostics-20221204-1439.zip Quote Link to comment
Solution JorgeB Posted December 5, 2022 Solution Share Posted December 5, 2022 14 hours ago, squirreltats said: eth2 has not been in use for some time Not sure it makes a difference with the link down but removed the eth2 config or at least the gateway. Quote Link to comment
squirreltats Posted December 5, 2022 Author Share Posted December 5, 2022 8 hours ago, JorgeB said: Not sure it makes a difference with the link down but removed the eth2 config or at least the gateway. I removed the NIC and that solved the issue.... why it decided to do that now and not a year ago baffles me. Many thanks to you! 1 Quote Link to comment
squirreltats Posted December 6, 2022 Author Share Posted December 6, 2022 14 hours ago, JorgeB said: Not sure it makes a difference with the link down but removed the eth2 config or at least the gateway. I changed the IP Address and removed the gateway for the time being as it is not in use currently. Many thanks. That solved my issue. Though like I said before, I don't know why it chose to act up now. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.