DigitalLF Posted January 4, 2023 Share Posted January 4, 2023 (edited) Parity 1 WDC_WD80EFZX -0000000_00000000 - 8 TB (sde) Parity 2 ST18000NM000J-0000000_00000000 - 18 TB (sdg) Disk 1 WDC_WD80EFZX -0000000_00000000 - 8 TB (sdk) Disk 2 WDC_WD80EFZX -0000000_00000000 - 8 TB (sdm) Disk 3 WDC_WD80EFZX -0000000_00000000 - 8 TB (sdc) Disk 4 WDC_WD80EFZX -0000000_00000000 - 8 TB (sdh) Disk 5 WDC_WD60EFRX -0000000_00000000 - 6 TB (sdl) (DEAD) Disk 6 WDC_WD80EFZX -0000000_00000000 - 8 TB (sdi) Disk 7 WDC_WD10EFRX -0000000_00000000 - 1 TB (sdd) Disk 8 WDC_WD10EFRX -0000000_00000000 - 1 TB (sdf) A week or two ago "Disk 5" died in the array. (Not parity). Today I got a new Seagate Exos X18 18Tb to replace "Parity 1" as a late Xmas gift and to replace "Disk 5" with "Old Parity 1". I Also want to remove "Disk 7" and "Disk 8". Example: Parity 1 ST18000NM000J-0000000_00000000 - 18 TB (sde) (NEW) Parity 2 ST18000NM000J-0000000_00000000 - 18 TB (sdg) Disk 1 WDC_WD80EFZX -0000000_00000000 - 8 TB (sdk) Disk 2 WDC_WD80EFZX -0000000_00000000 - 8 TB (sdm) Disk 3 WDC_WD80EFZX -0000000_00000000 - 8 TB (sdc) Disk 4 WDC_WD80EFZX -0000000_00000000 - 8 TB (sdh) Disk 5 WDC_WD80EFZX -0000000_00000000 - 8 TB (sdl) (Old Parity 1) Disk 6 WDC_WD80EFZX -0000000_00000000 - 8 TB (sdi) What would be the best/fastest/safest way? Edited January 4, 2023 by DigitalLF Quote Link to comment
JonathanM Posted January 4, 2023 Share Posted January 4, 2023 2 hours ago, DigitalLF said: Also want to remove "Disk 7" and "Disk 8". After disk5 is replaced and the array is healthy again, you can set a new config without those disks and rebuild parity. I can't think of a good safe way to accomplish everything at once, you need to be sure the array has one good parity check with zero errors before you remove any disks. 1 Quote Link to comment
itimpi Posted January 4, 2023 Share Posted January 4, 2023 2 hours ago, DigitalLF said: I Also want to remove "Disk 7" and "Disk 8". You did not mention it, but you will need to copy any data off these drives that you want to keep before removing them as Unraid will not do it automatically for you. You can do this manually using something like the Dynamix File Manager plugin or with less manual intervention using the unBalance plugin. 1 Quote Link to comment
DigitalLF Posted January 4, 2023 Author Share Posted January 4, 2023 @JorgeB @JonathanM @itimpi Thank you all! If I understood you correctly after the preclear I'm running right now I will be able to take 8TB "Parity 1" away and then have two drives offline for the time being and add the new 18Tb as "Parity 1" and "OLD Parity 1" as a new "Disk 5" in one operation right? And when it's all done I could remove the 1Tb drives on a second operation. I'm sorry I did not explain that I have unBalance that I will use to move all from "Disk 7" and "Disk 8" to other drives. Quote Link to comment
JonathanM Posted January 5, 2023 Share Posted January 5, 2023 Do you read the parity swap link? 1 Quote Link to comment
DigitalLF Posted January 5, 2023 Author Share Posted January 5, 2023 20 hours ago, JonathanM said: Do you read the parity swap link? Yes I have. I have used it before about 3+ years ago and forgotten about it. but i mostly needed confirmation because my anxiety. I'm just worried I would loose all the data. Also if I do a parity swap then I would not have any parity drives which is scary.. Sorry for that. Quote Link to comment
JonathanM Posted January 5, 2023 Share Posted January 5, 2023 Just now, DigitalLF said: if I do a parity swap then I would not have any parity drives Not sure we are on the same page. Parity swap actually creates a duplicate of your parity drive as in interim step before rebuilding your data on the old parity drive, so technically for a portion of the procedure you have 2 copies of your parity drive. 1 Quote Link to comment
DigitalLF Posted January 6, 2023 Author Share Posted January 6, 2023 3 hours ago, JonathanM said: Not sure we are on the same page. Parity swap actually creates a duplicate of your parity drive as in interim step before rebuilding your data on the old parity drive, so technically for a portion of the procedure you have 2 copies of your parity drive. Oh my bad then. I will re read that page a 3th time. I didn't really comprehend it all then.. i thought it wore more risky but then i understand you better now. Thank you for taking time to explain it. Then i can feel calm about it! I'm doing the preclean now so it will be a few days but that's just awesome! Quote Link to comment
DigitalLF Posted January 8, 2023 Author Share Posted January 8, 2023 On 1/5/2023 at 10:26 PM, JonathanM said: Not sure we are on the same page. Parity swap actually creates a duplicate of your parity drive as in interim step before rebuilding your data on the old parity drive, so technically for a portion of the procedure you have 2 copies of your parity drive. On point 13. It says I should now get a "Copy" button but it's not there under "Array Operation". Both the new parity drive and the new "Disk 5" are both blue so I think I i've done everything the right way so far. All I have is a "Start" and the description "Start will start Parity-Sync and/or Data-Rebuild." Am I missing something? Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.